Objective: This study aimed to compare the activity of the trunk and leg muscles while performing fente (in fencing) wearing weighted and waterbag vests. Method: The electromyography test was used to measure and analyze the activation of the trunk and leg muscles. Eight active fencers from B University (age: 19.5 ± 0.66 years, height: 179.75 ± 5.93 cm, weight: 72 ± 6.32 kg) were selected for this study. Results: According to the EMG analysis results of the 4 muscles measured in this study, left-right differences were observed for rectus abdominis and external oblique abdominis, but left-right differences between the groups were not significant. The gluteus medius muscle was not significantly different from the adductor muscle, but there were significant differences between the groups. Conclusion: The electromyographic analysis of the four muscles measured in this study revealed no significant difference between the left and right recti abdominis and external obliques depending on the vests. However, significant differences were observed between the left and right gluteus medius and adductor longus. Our results can be interpreted as the effects of the inherent movements involved in the fente. Furthermore, our results indicate that the weight transfer while wearing a waterbag vest, which provides an unstable environment, increased the activity of leg muscles.
The natural convection and combined heat transfer induced by fire in a rectangular enclosure is numerically studied. The model for this numerical analysis is partially opened, it is divided by a vertical baffle projecting from ceiling. The solution procedure Includes the standard k- $\varepsilon$ model for turbulent flow and the discrete ordinates method (DOM ) is used for the calculation of radiative heat transfer equation. In this study, numerical simulation on the combined naturnal convection and radiation is carried out in a partial enclosure filled with absorbed-emitted gray media, but is not considered scattering problem. The velocity vectors, streamlines, and isothermal lines are compared the results of pure convection with those of the combined convection-radiation, the combined heat transfer. Comparing the results of pure convection with those of the combined convection-radiation, the combined heat transfer analysis shows the stronger circulation than those of the pure convection. Three different locations of heat source are considered to observe the effect of heat source location on the heat transfer phenomena. As the results, the circulation and the heat transfer In the left region from heating block are much more influenced than those in the right region. It is also founded that the radiation effect cannot be neglected in analyzing the building in fire.
Kim, Tae Ho;Jung, Jae Jun;Kim, Yong Han;Yang, Ji-Hyuk;Jun, Tae-Gook
Journal of Chest Surgery
/
v.47
no.6
/
pp.529-532
/
2014
An eight-day-old neonate was diagnosed with dextro-transposition of the great arteries, atrial septal defect, patent ductus arteriosus, and a single sinus origin of the coronary arteries. The single coronary artery originated from the left sinus (sinus 2), had a proximal left circumflex arterial branch, and passed anteriorly to the right side of the aorta, further branching into the right coronary and left anterior descending arteries. We successfully performed an arterial switch operation and coronary transfer by tube graft reconstruction with autologous aortic tissue to treat the dextro-transposition of the great arteries and atrial septal defect with a single-sinus origin of the coronary arteries.
A new phenomenon in recent trade is the rising interest in the trade of product production and manufacturing methods themselves, unlike in the past, when the interest was focused on the trade of tangible goods. That is, technology is considered as the object of trade instead of a simple element of production as "technology itself is commercialized". The broad meaning of technology encompasses all the property of knowledge with economic value. Its narrow meaning refers to technology used to produce and manufacture goods. Technologies have features such as no forms, heterogeneity, accumulation of value and extinction of right. The trade of technology commands different styles and content from that of tangible goods due to their unique characteristics; and accordingly, has various risk factors. In other words, technology can be traded in various ways according to commercial objectives including licensing, technical partnership, and joint investment in addition to general trading. The specific forms of technology transfer strategies depend on the purposes and situations between corporations. In case of technical trade with any form, the parties should be cautious about the following practical aspects: First, the contract should clearly define the scope and transfer method of technology. It is a very important matter how the provider of technology will provide the user of technology with abstract technology with no substantiality. Second, a monopoly on technology recognized as intellectual property rights is granted to their inventors for some periods of time, but anyone can have access to that technology after the term of existence. Thus, it is important to check the terms of existence of a patent as well as the terms of contract. Third, the user of technology should fulfill his confidentiality obligation to prevent the technology of the provider from being leaked to a third party unjustly. Fourth, the provider of technology should make a contribution to the successful implementation of the technology by the user as well as provide the licensed technology. Finally, a model contract is recommended to minimizing the legal hiatus of complex technology transfer trade when concluding a contract.
This study was performed to investigate the effects of stage and quality of embryo, synchrony between donor and recipient and difficulty of transfer on pregnancy rate following non-surgical transfer of frozen-thawed bovine embryos. The results were as follows; 1. The overall pregnancy rate of this experiment was 63.4% and that of heifers(73.1%) was higher than that of cows(46.7%). 2. The pregnancy rates of recipients transferred with morulae, early blastocysts and blastocysts were 50.0%, 64.7% and 71. 4%, respectively. 3. The pregnancy rate of recipients transferred with good embryos(67.9%) was higher than that of recipients transferred with fair embryos(53.8%). 4. The pregnancy rates of embryos transferred to left and right uterine horn were 63.2% and 63.6%, respectively. 5. The pregnancy rate of recipients in estrous synchrony 0(76.2%) was higher than those of recipients in synchrony -1(55.6%) and +1(44.4%). 6. The pregnancy rate of recipients transferred with 2 embryos (71. 4%) was higher than that of recipients transferred with 1 embryo(61.8%). 7. The pregnancy rate of embryos transferred to uterine tip (72.0%) was higher than that of embryos transferred to uterine base(50.0%). 8. Ease of transfer was ranked to a scale of one to three on the basis of increasing difficulty. Transfers ranked as ease score 1 accounted for 77.8% of pregnancies and had higher pregnancy rate than ease score 2(66.7%) or 3(45.5%). 9. The pregnancy rate of recipients with excellent corpus luteum(CL) (70.0%) was higher than those of recipients with good CL(61.1%) or fair CL(61.5) %. In reviewing above results, it was considered that the factors such as embryo stage, embryo quality, estrous synchrony, corpus luteum quality, transfer site within uterus, recipient's parity and ease score affected the pregnancy rate after non-surgical transfer of frozen-thawed bovine embryos.
The natural convection heat transfer and solidification in a stratified pool are studied. The flow and heat transfer characteristics in a heat generating pool are compared between single-layered and double-layered pools. And local Nusselt number distributions on outer walls are obtained to consider thermal loads on a vessel wall. The cooling and solidification of Al₂O₃/Fe melt in a hemispherical vessel are simulated to study the mechanism of heat transfer and temperature distribution. A unstructured mesh is chosen for this study because of the non-orthogonality originated from the boundaries of double-layered pool. Interface between the layers is modeled to be fixed. With this assumption mass flux across the interface is neglected, but shear force and heat flux are considered by boundary conditions. The colocated cell-centered finite volume method is used with the Rhie-Chow interpolation to compute cell face velocity. To prevent non-physical solutions near walls in case body force is large the wall pressure is extrapolated by the way to include body force. The numerical solutions calculated by current method show that averaged downward heat flux of the double-layered pool increases compared to single-layered pool and maximum temperature occurs right below the interface of the layers.
This study was carried out to investigate the inte actions between recipients and embryos to compare pregnancy rates in bovine embryo transfer, such as synchrony and stage of embryos, synchrony and quality of embryos, synchrony and side of uterine horn, and preservation time and stage of embryos. Fifty-two embryos were transferred by surgically to 42 Holstein heifers, 3 Holstein cows and 7 Korean native heifers from Feb., 1985 to June, 1986. The results were as follows: 1. In the trial of interactions between synchrony and embryo stage, recipients synchronired from- hours to + 12 hours in synchrony and embryos from morulac stage to advanced blastoctyst stages showed reason able pregnancy rate. 2. Excellant (A) and good (B) grade embryos showed good pregnancy rate, 81.8% and 73.3% respectively, but fair (C) grade embryos showed poor, 25% only at the same boundary of recipient synchrony. 3. More recipients had corpus luteum on the right ovary than the left, and also had better pregnancy rate (26/32 vs 13/20,81.3% vs 65%). 4. A good pregnancy rates (over 60%) were obtained with the embryo transferred 17hrs after flush at room temperature or field condition in culture medium.
The purpose of this study is to obtain an improved interpretation of heat transfer phenomena between blocks and fluids in the parallel conducting plates. Flow is two-dimensional, incompressible steady laminar flow over rectangular blocks, representing finite heat source on parallel plate. Heat transfer phenomena, temperature of blocks and heat transfer into the flow field are investigated for different spacings between blocks and Reynolds numbers. Results indicate that Nusselt number on the far upstream corner of the block was higher than that of any part of the block. As Reynolds number and spacings of blocks increased, Nusselt number increased. The distribution of local Nusselt number on the top surface of the conducting plate is similar to the case with insulated plate. Temperature of the block which has heat source in half cubage was approximately twice as high as temperature of the block which has heat source in whole cubage. As Reynolds number and spacings of blocks increased, overall temperature decreased. The peak value of block temperature occurred at position shifted to the right or upper right from center. The maximum temperature of block can be expressed as a function of Reynolds number, spacings between blocks, position of maximum temperature of each block and then it is possible to predict the maximum temperature of blocks.
In this study, wish to analyze effect that affect on each tunnel (right and left tunnel) according as proceeding of leading tunnel (right tunnel), following tunnel (left tunnel) and pilot tunnel excavation through behavior of tunnel and surrounding base by model tests. And stress-transfer mechanism that occurs from in-situ loosing area and arching effect by difference of stiffness ratio and overburden heights were verified experimentally. The model tests were carried out by varying the stiffness of reinforced area and overburden height, measured deformation of tunnel and displacement of surrounding base. The model tests followed exactly the real 2-Arch tunnel construction stages.
Transactions of the Korean Society of Mechanical Engineers
/
v.16
no.4
/
pp.765-774
/
1992
The effect of the interactive flow on convective heat transfer from two vertical isothermal parallel plates have been studied numerically by the finite difference method. The Reynolds number, Grashof number, the relative length, L$_{2}$/L$_{1}$, and the dimensionless plate spacing, b/L$_{1}$ are varied as parameters. In case of outside mean Nusselt number, left outside mean Nusselt numbers show same values as L$_{2}$/L$_{1}$ and b/L$_{1}$ increase, but right outside mean Nusselt numbers decrease as L$_{2}$/L$_{1}$ increases. The inside mean Nusselt numbers are constant at narrow spacings and increase at wide spacings as Grashof numbers increase. The optimun plate spacing on left inside mean Nusselt numbers is b/L$_{1}$=0.4 at Re=100 and b/L$_{1}$=0.3 at Re=200. For the right inside mean Nusselt number, the optimum plate spacings move to the narrow spacing as Reynolds numbers increase and L$_{2}$/L$_{1}$ decrease.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.