• 한국의류학회지
• /
• 제31권1호
• /
• pp.68-76
• /
• 2007

The purpose of this study is to investigate change of mechanical and physical properties, shape behavior and hand value in weft knit when rib stitch and milan stitch are combined. The knit stitches used in this study are plain stitch, half milan rib stitch, milan rib stitch, $2{\times}1$ rib stitch, $2{\times}1$ half milan rib stitch and $2{\times}1$ milan rib stitch. We analyzed physical and mechanical properties(tensile, bending, shear, compression, surface properties, thickness and weight) of the knit stitches and calculated their primary hand value and total hand value through translational formulas using the KES(Kawabata Evaluation System). The results are as follows; In evaluation of mechanical properties and hand values of knit stitches, plain stitch had the highest flexibility and the lowest T.H.V. as women's winter knit wear. Since $2{\times}1$ rib stitch had too high elongation in one direction, although it had the highest T.H.V, it needs to be careful when plain stitch and $2{\times}1$ rib stitch are applied for women's winter knit wear. Since Milan rib stitch and $2{\times}1$ milan rib stitch had high T.H.V. similarly, it is considered that they are suitable for women's winter knit wear. Specially, when Milan stitch is combined with $2{\times}1$ rib stitch, its shape stability and fullness are contained and flexibility is added on it. Therefore, $2{\times}1$ milan rib stitch can be also applied for women's winter knit wear.

• 복식문화연구
• /
• 제13권1호
• /
• pp.47-59
• /
• 2005

This study aims to measure stretch rate of standard weight in the $2{\times}1$ rib stitch and $2{\times}2$ rib stitch, and to apply features of rib stitch to the knit pattern. The reviewer examined the sample knit for test with 100% wool, $2/48's{\times}2$, 12 gauge, and then made knit patterns and sample clothes for test considering stretch rate of standard weight of 10gf, 15gf, 20gf, 25gf based on the results from the former test, and finally estimated the try-outs for sample clothes. This study came out with the following results: From the functional estimate of knit patterns made by standard stretch rate of each stitch, the 20gf weight sample clothes of $2{\times}1$ and $2{\times}2$ rib stitchs were in high estimate. For the bust, B/4~ -4.6cm knit pattern was made of $2{\times}1$ rib stitch, B/4~5.3cm of $2{\times}2$ rib stitch. In conclusion, because $2{\times}1$ and $2{\times}2$ rib stitchs has the much higher stretch rate in the direction of the course than $0{\times}0$ ad $1{\times}1$ rib stitchs, high stretch rate of standard weight should be applied to the case of making knit wear. It is expected that this will lead stable sizing and measurement system when used in making knit patterns, and satisfy knit wearers' various needs.

• 복식문화연구
• /
• 제12권5호
• /
• pp.769-780
• /
• 2004

This study aims to measure stretch rate of standard weight in the direction of the knit stitch course by the difference in the way of weaving rib stitch, the most elastic stitch of all the knit stitches and to apply features of rib stitch to the knit pattern. The reviewer examined the sample knit for test with 100% wool, 2/48's 2, 12 gauge, and then made knit patterns and sample clothes for test considering stretch rate of standard weight of 10gf, l5gf, 20gf, 25gf based on the results from the former test, and finally estimated the try-outs for sample clothes. This study came out with the following results. From the functional estimate of knit patterns made by standard stretch rate of each stitch, the l5gf weight sample clothes of 0×0 and 1×1 rib stitches looking similar to plain stitch. For the bust, B/4-1.0㎝ knit pattern was made of 0×0 stitch, B/4-1.2㎝ of 1×1 rib stitch. In conclusion, because rib stitch has the much higher stretch rate in the direction of the course than other stitches, low stretch rate of standard weight should be applied to the case of making knit wear. It is expected that this will lead stable sizing and measurement system when used in making knit patterns, and satisfy knit wearers' various needs.

• 한국의류산업학회지
• /
• 제13권6호
• /
• pp.990-995
• /
• 2011

This study analyzed the effects of the knit stitch type, fiber composition, and yarn thickness on the mechanical properties of knitted fabric. The results were as follows: The course density was the highest in the case of the rib stitch. On the other hand, the wale density was the highest in the case of the float stitch. The thickness was the highest in the case of the rib stitch. The same results were obtained even for different fiber compositions and yarn thicknesses considered in this study. The burst strength of wool knit fabric was higher than that of A/W knit fabric. The stiffness was the lowest in the case of the plain stitch. The same results were obtained even for different fiber compositions and yarn thicknesses. The pilling properties were excellent for all knit stitches, fiber composition, and yarn thicknesses as pilling degree : 5. The air permeability decreased in the following order : rib > plain > float stitch. The same results were obtained even for different fiber compositions and yarn thicknesses. The heat retention rate decreased in the following order : rib > float > plain stitch. The same results were obtained even for different fiber compositions and yarn thicknesses.

• 대한가정학회지
• /
• 제26권4호
• /
• pp.1-13
• /
• 1988

The purpose of this study is to investigate water and after vapor transport characteristics of underwear fabrics. Experimental materials were cotton woven fabric and cotton knitted fabric, nylon tricot (untreated and hydrophilic finished) and cotton/polyester/cotton triple layer. Cotton knitted fabric have three types of knit structure (interlock, rib, plain stitch) and knit with either 38's or 60's combed yarn. And cotton woven fabric have plain weave with 60's combed yarn. As experimental methods, vapor cup test, dynamic method, vertical wicking test and transplanar uptake test were used. The results are as follows. 1) In cotton specimens, the order of water vapor transpiration (wvt) was plain > rib > interlock in the same yarn diameter. The knit fabric of thinner yarn showed the better wvt among the same knit structure. 2) In cotton specimens, the order of water absorbency was interlock > rib > plain in the same yarn diameter. the knit fabric of thicker yarn showed the better absorbency among the same knit structure. 3) When knit fabric (60's plain) is compared with woven fabric 960's plain), knit fabric showed faster rate of wvt, more amount of uptake and slower rate of water uptake than woven fabric did. 4) When compared untreated nylon with hydrophilic finished nylon, hydrophilic finished nylon showed much more water absorbency than untreated nylon did, but showed same rate of wvt. 5) The water transport characteristics of triple layer underwear fabric showed that the thinner and the lighter one, the better wvt and absorbency did.

• 복식
• /
• 제53권1호
• /
• pp.99-116
• /
• 2003

Knit is classified into two such as basic texture and applied one according to knitting principle, and the basic texture of weft knitting consists of single knit. rib knit, purl knit and interlock knit. The basic texture of warp knitting consists of double knit texture, double code knit texture and double vandyke knit texture. Fourteen costumes were produced with eighteen (18) different types and twenty four (24) raw materials, and we were trying to show a wide range of costumes produced with knitting by making two different brands at random and making different designs depending on four seasons. Knitting technique is very important element in that it allows special surface effectiveness and decides the characteristic of knitting materials. Knit designer plays very important roles such as selection of raw thread, deciding knitting technique and type of knitting machine in designing the knit. Therefore, the knit designer requires the ability to utilize the function of knitting machine to the maximum, the effort to acquire the variety of knitting technique, develop the new knitting technique and for the improvement of knitting design.

• 패션비즈니스
• /
• 제2권4호
• /
• pp.93-101
• /
• 1998

Knit products which had been limited only to underwear, recently became popularized, fashionized and highly classified covering even outer garments such as sportswear like golfwear, woman's dress, and man' s suit. As fashion cycle is getting shorter and the more a nation advanced prefers knit to woven fabrics knit industry has a very bright prospect, particularly woman's knit which is sensitive to fashion can be said as a fashion product with high value added. This study is to grasp the physical properties of stitch which are fundamental to the development of knit products. For this purpose, 2/20s of 100% wool were woven by the author of this study to basic plain stitch, rib stitch, varied transfer stitch, and float stitch on a SEMASEIKI cross knitter 7G to test the physical properties, and the result was as follows; 1. As for the relation between knit stitch and rate of extension recovery, rate of extension recovery was higher in the course direction than in the wale direction of three stitches except transfer stitch; rib stitch showed the highest rate of extension recovery in the course direction while float stitch showed the highest rate of extension recovery in the wale direction. 2. As for the relation between knit stitch and bursting strength elastic rib stitch showed higher bursting strength to indicate elasticity is an important factor of bursting strength and float stitch showed higher bursting strength too to indicate that the floating yarn on the surface plays a role of support. 3. As for the relation between knit stitch and air permeability perforated transfer stitch showed the lowest air permeability to prove that the size of perforation affects on the air permeability a great deal. 4. As for the relation between knit stitch and warmth retaining rib stitch through two lined needle bar showed the highest degree. The reason the warmth of perforated transfer stitch didn't decrease much was because the perforation wasn't big enough and content of air increased from the unevenness of the perforated parts through stitch variation. Based upon this result, each stitch can be characteristically summarized as follows; plain stitch showed a stable condition of knit cloth in four kinds of physical property test. And rib stitch is proper to tighten the edge of sleeve or clothe making use of its excellent extension recovery and to make socks for the highest bursting strength and warmth retaining. In the case of transfer stitch, seasonable designs can be taken by controlling the size of loop. Considering the pleasantness, underwear should be made of stitches with good air permeability float stitch was revealed to have color and pattern effects and a great bursting strength. This study has limitations in the aspect that it dealed with a small part of various knit stitches and the items of physical property test were not enough. The author of this study hopes that further studies would make deeper understandings about knit stitch based on more varied stitches and physical property tests ultimately to contribute to the development of fashionable designs proper to maximize the usage, function and originality.

• 한국의류산업학회지
• /
• 제1권3호
• /
• pp.280-287
• /
• 1999

본 연구의 목적은 위편성포의 역학적 성질값들의 조합값이 직불의 변형거동에 어떠한 영향을 미치는지에 대하여 편성조직과 편성밀도를 달리하여 살펴보고자 하였다. 위편성포 6종류를 선택하여 ($1{\times}1$ 고무편, 편반편, 편대편, 인터록편, 싱글피케, 크로스미스 인터록) 각각 편성밀도를 3가지(loose, medium, tight)로 달리하여 총 18종류의 위편성포를 제작하였다. 단위면적당 무게에 대한 굽힘 히스테리시스의 비인 2HB/W는 모든 편성조직에서 편성밀도가 증가함에 따라 커지며 싱글니트보다는 더블니트에서 더 큰 값을 보인다. 전단성질 중 탄성성분에 대한 소성성분의 비인 2HG/G는 모든 편성조직과 편성밀도에서 3이상의 매우 높은 값을 나타냈다. 표면의 요철변동에 대한 마찰계수의 변동비, 즉 MMD/SMD값은 편성밀도가 커질수록 감소하여 표면상태가 평활해짐을 알 수 있으며 더블 니트가 싱글니트보다 더 적은 값을 나타내어 표면의 평활도가 훨씬 우수한 것으로 나타났다.

• 한국의류학회지
• /
• 제21권1호
• /
• pp.170-181
• /
• 1997

The purpose of this study was to determine the effect of knit structure and knit density (machine tightness factor) on the dimensional properties and K1-4 values of weft-knitted fabrics followed over eleven cycles of mechanical relaxation to provide the basic data for constructing weft-knitted fabrics for outwear with excellent dimensional stability The eighteenth weft-knitted fabrics were produced with different knit structure (1$\times$1 rib, half-cardigan rib, half-milano rib, interlock, single pique, crossmiss interlock) and machine tightness factor (loose, medium, tight) for this study. Dimensional properties such as width, lengh, area shrinkage and dimensional parameter (K) of eighteenth knitted fabrics including thickness and bulk property were measured. The results were as follows; 1. The dimensional behavior of the Ix1 rib and interlock in relaxation cycles was anisotropic, i.e., length shrinkage was usually associated with a width expansion, whereas the other weft-kntted fabrics which have tuck or miss loops in the knit structure behaved isotropically, i.e., length and width shrinkages were usually found. It was proposed that the difference in dimensional behavior between these structures was due to the dissimilar nonrelaxed geometrical shapes of the individual structural units forming these weft-knitted structures. The mechanical relaxation shrinkage of weft-knitted cotton fabrics was dependent on the tightness of construction. For a range of fabrics knitted on this study, an increase in fabric tightness caused a decrease in the length shrinkage of the fabric accompanied by an increase in its width shrinkage.

• 한국의상디자인학회지
• /
• 제12권2호
• /
• pp.131-138
• /
• 2010

The purposes of this study are for current manufacturing status of the formal knit slacks for the middle aged women. As for the methodology, five manufacturers specializing in formal knitwear brands were subjected to the study, to examine the current manufacturing status of the knit slacks for the middle aged women, by conducting interviews and questionnaire with patterner and designer. The questionnaire items are 20 ones including general questions on manufacturing of the knit slacks, questions on materials used in manufacturing, and on sewing. The results are as followings : First, as for the manufacturing structure of the knit slacks manufacturer, all manufacturers directly manufactured knit slacks in their own factory, and the manufacturing was comprised of 10% in woven slacks and 90% in knit slacks. Second, as for the type of yarn mostly used in fabric knitting for the knit slacks, wool was used mostly for F/W, and acrylic or Saint yarn for S/S. As for the types of knit, Milano rib stitch and Half Milano rib stitch were used for wool and acrylic knitting, and plain stitch was used for Saint yarn. As for the gauge, 12G and 14G were used, whereas 7G, 12G was used for Saint yarn. Repair requests of the knit slacks were mostly on the length of the pants, such as shortening hip circumference and crotch length, or widening waist and hip area. The study shows that the size of knit slacks did not fit the body type of customers.