• Journal of Korean Ophthalmic Optics Society
• /
• v.16 no.1
• /
• pp.91-95
• /
• 2011

Purpose: In this study, we investigated the dye to staining for selective accumulation in rabbit retina. Methods: Rhodamine B was injected into the vitreous body in rabbit. After 24 h, the isolated retina was checked condition of cell staining on the microscope. We used conventional immunocytochemical techniques for recognizing cell type. Results: Well-labeled nuclei were seen in the middle of the inner nuclear layer of the rabbit retina. The number and distrbution of the accumulating cells were similar to those of the m$\ddot{u}$ller glia. To identify m$\ddot{u}$ller cell, we used antibody directed against vimentin. Rhodamine B-immunoreactive nuclei also were labeled with antivimentin antibody. We found that Rhodamine B was accumulated selectively in retinal m$\ddot{u}$ller cell. Conclusions: Specific accumulation in rabbit retinal m$\ddot{u}$ller cell occurred when Rhodamine B was applied to living retina.

• Journal of Environmental Health Sciences
• /
• v.37 no.3
• /
• pp.218-225
• /
• 2011

Objectives: In this paper, a dielectric barrier discharge (DBD) plasma reactor was investigated for degrading the dye Rhodamine B (RhB) in aqueous solutions. Methods: The DBD plasma reactor system in this study consisted of a plasma component [titanium discharge (inner), ground (outer) electrode and quartz dielectric tube], power source, and gas supply. The effects of various parameters such as first voltage (input power), gas flow rate, second voltage (output power), conductivity and pH were investigated. Results: Experimental results showed that a 99% aqueous solution of 20 mg/l Rhodamine B is decolorized following an eleven minute plasma treatment. When comparing the performance of electrolysis and plasma treatment, the RhB degradation of the plasma process was higher that of the electrolysis. The optimum first voltage and air flow rate were 160 V (voltage of trans is 15 kV) and 3 l/min, respectively. With increased second voltage (4 kV to 15 kV), RhB degradation was increased. The higher the pH and the lower conductivity, the more Rhodamine B degradation was observed. Conclusions: OH radical generation of dielectric plasma process was identified by degradation of N, N-dimethyl-4-nitrosoaniline (RNO, indicator of OH radical generation). It was observed that the effect of UV light, which was generated as streamer discharge, on Rhodamine B degradation was not high. Rhodamine B removal was influenced by real second voltage regardless of initial first and second voltage. The effects of pH and conductivity were not high on the Rhodamine B degradation.

• Journal of the Korean Chemical Society
• /
• v.63 no.4
• /
• pp.307-311
• /
• 2019

• Journal of Environmental Science International
• /
• v.21 no.6
• /
• pp.655-659
• /
• 2012

This study elucidates the COD removal of dye (Rhodamine B) through electrochemical reaction. Effects of current density (7.2 to 43.3 $mA/cm^2$), electrolyte type (NaCl, KCl, $Na_2SO_4$, HCl), electrolyte concentration (0.5 to 2.0 g/L), air flow rate (0 to 4 L/min) and pH (3 to 11) on the COD removal of Rhodamine B were investigated. The observed results showed that the increase of pH decrease the COD removal efficiency. Whereas, the increase of current density;NaCl concentration and air flow rate caused the increase of the COD removal of Rhodamine B.

• Journal of Environmental Science International
• /
• v.17 no.1
• /
• pp.37-44
• /
• 2008

The electro-chemical decolorization of Rhodamine B (RhB) in water has been carried out by electro Fenton-like process. The effect of distance, material and shape of electrode, NaCl concentration, current, electric power, $H_2O_2$ and pH have been studied. The results obtained that decrease of RhB concentration of Fe(+)-Fe(-) electrode system was higher than that of other electrode system. The decrease of RhB concentration was not affected electrode distance and shape. Decolorization of electro Fenton-like reaction, which was added $H_2O_2$ onto the electrolysis using electrode was higher than electrolysis. Addition of NaCl decreased the electric consumption. The lower pH is, the faster initial reaction rate and reaction termination time observed.

• Journal of Environmental Science International
• /
• v.14 no.9
• /
• pp.881-888
• /
• 2005

The biosorption of dye, Rhodamine B(Rh-B), onto waste activated sludge was investigated. The biosorption capacity and contact time were shown as a simulation of dye adsorption equilibrium and kinetics models. We observed that biosorption of Rh-B occurred rapidly less than 4 hr. These experimental data could be better fitted by a pseudo-second-order rate equation than a pseudo-first-order rate equation. The equilibrium dependence between biosorption capacity and initial concentration of Rh-B was estimated and it was found that the equilibrium data of biosorption were fitted by four kinds of model such as Langmuir, Freundlich, Redlich-Peterson, and Koble-Corrigan model. The average percentage errors, $\varepsilon(\%)$, observed between experimental and predicted values by above each model were $21.19\%,\;9.97\%,\;10.10\%\;and\;11.76\%$, respectively, indicating that Freundlich and Redlich-Peterson model could be fitted more accrately than other models.

• Clean Technology
• /
• v.21 no.3
• /
• pp.178-183
• /
• 2015

Lead molybdate (PbMoO₄) oxides were successfully synthesized using a conventional hydrothermal method and a microwave-assisted hydrothermal method. They were characterized by XRD, DRS, BET, Raman, SEM and PL. We also investigated the photocatalytic activity of these materials for the decomposition of Rhodamine B under UV-light irradiation. From XRD and Raman results, well-crystallized PbMoO₄ crystals have been successfully synthesized regardless of preparation method and had 42~59 nm particle size. The PbMoO₄ catalysts prepared using microwave-assisted process had the similar particle size and enhanced the photocatalytic activity when compared to that prepared by hydrothermal method. The PbMoO₄ catalysts prepared under the irradiation of microwave for 75 min showed the highest photocatalytic activity. The PL peaks appears at about 530 nm at all catalysts and it was also shown that the excitonic PL signal is proportional to the photocatalytic activity for the decomposition of Rhodamine B.

• Textile Coloration and Finishing
• /
• v.26 no.1
• /
• pp.7-12
• /
• 2014

Nowdays, fluorescent rhodamine chemosensors have attracted a worldwide interest due to its ability to selectively detect heavy and transition metal cations. Due to the importance in environmental and biological toxic effects, the developments of fluorescent chemosensors have been received considerable attention in recent. Especially, a rhodamine-based chemosensor probes have been proved to be useful by exhibiting the efficient "off-on" fluorescence switching toward selected metal cations. This fluorophore can undergo the transformation from non-fluorescent and colorless spirolactam derivative to fluorescent ring-open form. In this study, a new fluorescent chemosensor was synthesized using rhodamine B through two-step procedures, and its selectivity and related optical property were characterized. Selectivity and sensitivity was found toward $Cu^{2+}$ guest molecules and then related optical properties of rhodamine B based fluorescent chemosensor compound were characterized using discussed. In addition, computational calculation was used to determine the HOMO/LUMO values.

• Journal of Environmental Science International
• /
• v.24 no.7
• /
• pp.955-960
• /
• 2015

A colorimetric chemosensors $Sn^{2+}$ have been designed and synthesized by three steps. The spirolactam ring-opening process of rhodamine B is one of the most useful mechanisms for controlling fluorescence properties. Herein, new fluorescent chemosensors 1 and 2 based on rhodamine B containing phenothiazine derivertive were synthesized. They exhibit selective fluorescence enhancement behaviour in the presence of $Sn^{2+}$ ion. Complexation between these compounds and the metal cations were confirmed through continuous variation method. It is observed that compounds 1, 2, and $Sn^{2+}$ ion are complexed by 1:1 formation. Especially the proposed compounds 1 and 2 exhibit quick, simple and facile synthetic route.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.11
• /
• pp.3381-3386
• /
• 2013

This paper reports a method using molecularly imprinted polymers that are grafted onto the surface of carboxyl-modified multi-walled carbon nanotubes as the solid-phase extraction adsorbents to detect Rhodamine B in chili powder samples. The polymers were characterized by FTIR and TGA. Various parameters which probably influence efficiency of extraction were optimized. The analytical parameters such as precision, accuracy and linear working range were also determined in optimal experimental conditions. And the proposed method was applied to analysis of Rhodamine B in chili powder samples. The limits of detection and quantification were 2.57 and 8.56 ${\mu}g/g$, respectively. The recoveries for analytes were higher than 95% and relative standard deviation values were found to be in the range of 0.83-4.15%. This method was successfully applied for the determination of Rhodamine B.