• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2002년도 춘계학술대회 논문집
• /
• pp.70-73
• /
• 2002

Using a simple compression test, the viscosity measurement experiment is carried out with the grain-refined Al-Si alloy(A356). The measured rheological data are expressed with power-law(Ostwald-de Waele) model and using commercial package, MAGMAsoft, coefficients of Ostwald-de Waele model and Carreau-Yasuda model are calculated. To verify the viscosity data, the die is designed to be applicable to the semi-solid die casting of automotive component and filling test is carried out. The filling test and the simulation result are compared and in good agreement. Hereafter, these data are considered to be usefully allied other product in the semi-solid die casting.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.927-929
• /
• 2014

MRE(Magneto-rheological Elastomer) is a material which shows reversible and various modulus in magnetic field. Comparing to conventional rubber vibration isolator, MREs are able to absorb broader frequency range of vibration. These characteristic phenomena result from the orientation of magnetic particle (i.e., chain-like formation). Magnetic reactive powder(MRP), having rapid magnetic reaction, was selected as a magnetic particle to give magnetic field reactive modulus. The mechanical properties of manufactured MREs were measured with the application of magnetic field. The analysis of MR effect was carried out by FFT analyzer with various induced current. As induced magnetic field intensity increased and coated with MRP, increment of MR effect was observed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.1048-1053
• /
• 2003

This paper proposed a MR(Magneto-rheological) seat damper for a commercial vehicle. After formulating the governing equation of motion, an appropriate size of damper is designed and manufactured. Following the equation of fie d-dependent damping force characteristics, a semi-active seat suspension installed with the proposed MR-damper is constructed and its dynamic model id established, Subsequently, vibration isolation performance of the semi-active suspension system is demonstrated by incorporating with a MRAC(Model referenced adaptive control) fer the MR Seat Damper

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 춘계 학술논문 발표대회 1부
• /
• pp.99-101
• /
• 2011

In order to have pumping technology for high speed construction of tall building, study for quantitative evaluation of flow characteristics and pumpability should be conducted. So, this study evaluate the characteristics among the inner pipe pressure, fresh concrete properties and separated mortar through the continuous pumping test. Then it consider of relations between rheological properties and pumpability. In the result of test, it found that there are high interrelationship between the rheological characteristics which represented plastic viscosity and pressure lose by pipe length.

• 한국지진공학회논문집
• /
• 제26권4호
• /
• pp.149-156
• /
• 2022

Magneto-Rheological Fluid (MRF) is a functional fluid in which flow characteristics change into magnetic force due to its magnetic particles. When the semi-active control device does not use MRF for a long time, precipitation of magnetic particles and abnormal control force occur. Thus, Electro Magneto-Rheological Fluid (EMRF), which improves the precipitation of magnetic particles for MRF and exhibits existing control performance, was developed in this study. First, the optimal mix proportion ratio was selected by conducting a precipitation experiment and a controlled force test by varying the content of grease based on the existing MRF components. Also, EMRF was applied to the shear-type damper to evaluate the control performance when applied to the control device. The cylinder-type damper was developed to apply to the structure, and control performance evaluation was conducted. The result confirmed that the precipitation of the magnetic particles was improved, while the damper using EMRF exhibited excellent control performance.

• Archives of Metallurgy and Materials
• /
• 제67권4호
• /
• pp.1511-1515
• /
• 2022

This study investigates the effects of repetitive injection molding on the properties of feedstock using the AISI 4140 feedstock. The properties of feedstock are evaluated from the mixing homogeneity of powder and binder, rheological properties, and dimensional accuracy of parts sintered. The feedstock after the 1^st injection molding shows a better homogeneity than as-received feedstock due to re-mixing effects between the screw and barrel during the injection molding process. As the number of recycling numbers increases, the homogeneity, viscosities ad shrinkage ratio of recycled feedstocks show slight differences with those of the as-received feedstock until the 6^th molding injection. However, some rheological parameters like the moldability index sharply increased up to the 4^th injection but shows a tendency to decrease thereafter.

• 한국건설순환자원학회논문집
• /
• 제6권1호
• /
• pp.16-24
• /
• 2018

본 연구에서는 3D 프린팅 공법 적용을 위한 콘크리트 기초 레올로지 분석을 목적으로 실험을 수행하였다. 콘크리트 구성성분 중 유동특성에 큰 영향을 미치는 인자(W/B, binder Type, replacement ratio, super plasticizer dosage)의 변화에 의한 레올로지 특성(rheological properties)을 실험적으로 분석하였다. 실험은 페이스트와 모르타르 크게 두 가지 인자로 구분하여 수행하였다. 페이스트 실험에서는 W/B, binder type, replacement ratio, super plasticizer dosage를 주요 변수로 설정하여 레올로지를 분석했다. 모르타르 실험에서는 W/B와 sand ratio에 따른 레올로지 특성을 분석했다. 결과적으로 W/B가 증가될수록 viscosity가 감소하였으며, FA를 치환할 FA 비율이 증가됨과 함께 viscosity가 증가하였다. 유동성 증가를 위해서는 SF를 5%만 치환해도 shear stress를 감소시키며 viscosity는 약 83%까지 감소되었다. 모르타르 레올로지 평가를 통해 W/B 30~40% 구간에서 큰 폭의 변화가 일어나는 임계치 구간이 존재하는 것으로 분석됐다. 또한 동일 W/B 내에서는 sand 비가 50~60% 구간에서 shear stress가 두 배 이상 증가하는 임계 구간이 존재하는 것으로 분석됐다.

• 한국건축시공학회지
• /
• 제6권3호
• /
• pp.75-82
• /
• 2006

This study investigates the influence of various blending factors on cement paste fluidity and find out the most effective evaluation method of cement paste flow, comparing flow test apparatuses such as ring flow(R-F), flow cone(F-C) and mini slump(M-S). A viscometer also measures the rheology coefficients to secure faithful numerical data. Firstly, series I examines cement paste, affected by several cement products and mineral admixture types in the range of W/B 40%, ordinary fluidity, and W/B 30%, high fluidity. In this series, the three types of cement product depended on companies, are randomly used and the mineral admixture, such as fly ash, blast furnace slag and silica fume, are incorporated in the cement paste, in response to the ratio of 10, 20, to 30%, respectively. In addition, series II studies various chemical admixture types, affecting the cement paste. This series is carried out with manufacturing companies and component types in the range of W/C 30%, high fluidity. For the manufacturing companies, randomly four products are used and for the component types, polycaboxylate, melamine, naphthalene and lignosulfonate type are chosen. Test results showed that in the fluidity test of cement paste considering various types of blending factors, R-F exhibited similar tendency with F-C and M-S. In the analysis of consistency curves measured by viscometer, the fluidity evaluation method using flow test apparatuses was significantly effective, except for the some of the low fluidity specimens. In conclusion of this study, R-F was the most convenient, faithful and effective fluidity evaluation method of cement paste.

• 한국식생활문화학회지
• /
• 제18권6호
• /
• pp.506-514
• /
• 2003

The effects of Japanese apricot(Prunus mume Sieb. et Zucc.) flesh on baking properties of white breads were investigated by evaluation of specific loaf volume, pH, acidity, rheological property, color and sensory quality. Bread was processed by adding 4.7%, 9.4%, 14.1% and 18.8% of Japanese apricot flesh to basic formulation. The compositions of Japanese apricot flesh were 88.19% moisture, 0.45% crude ash, 4.10% dietary fiber, 4.04% citric acid and 0.41% total sugars. The specific loaf volume of the breads was decreased from 3.274mL/g to 1.857mL/g as Japanese apricot flesh contents increased from 0% to 18.8%. The pH of the breads decreased but the acidity of those increased as the percentage of Japanese apricot flesh to wheat flour increased. Lightness(L value) of the breads decreased by the addition of Japanese apricot flesh, while yellowness(b value) and redness(a value) increased. Texture measurement showed that springiness, cohesiveness and resilience decreased with increase of Japanese apricot flesh contents. While, hardness, gumminess and chewiness were the lowest in the bread with 9.4% Japanese apricot flesh, and increased in the bread with 4.7%, 14.1% and 18.8% Japanese apricot flesh contents. In sensory evaluation, the highest sensory scores for flavor, taste, aftertaste and overall acceptability were obtained when Japanese apricot flesh content was 4.7%, and softness and chewiness was the best when 9.4% of Japanese apricot flesh was added. The moisture content of the breads containing Japanese apricot flesh was higher than that of the control to add no flesh during storage at $25^{\circ}C$. Based on physical, rheological and sensory evaluation, addition of 4.7{\sim}9.4% Japanese apricot flesh suggested to be acceptable for processing bread.

• 한국지반환경공학회 논문집
• /
• 제18권2호
• /
• pp.29-37
• /
• 2017

집중호우로 인하여 산악지반에 발생하는 토석류의 거동은 대상지반 세립분의 전단강도 및 유변학적 특성들에 의하여 영향을 받기 때문에, 두 특성에 대한 정수는 토석류 거동을 파악하는데 매우 중요한 요소이다. 본 연구에서는 직접전단 실험을 통하여 세립분의 전단강도 및 유변학적 정수를 평가하고자 하였다. 건조상태와 액성한계상태로 조성된 두 가지 세립분 시료에 대하여 직접 전단실험을 수행하였으며, 연직응력에 따른 전단강도를 측정하여 점착력과 내부마찰각을 산정하였다. 또한 액성한계로 조성된 시료의 잔류전단강도를 획득하기 위하여 전단변형률속도와 전단방향을 변화시켜 반복전단실험을 수행하였다. 실험 결과, 액성한계상태의 시료는 건조 상태 시료에 비해 내부마찰각은 작지만 점착력은 더 큰 것으로 나타났으며, 잔류전단강도를 통해 산정한 내부마찰각과 점착력은 첨두전단강도에 의해 산정된 결과보다 작은 것으로 나타났다. 반복전단 결과, 전단변형률속도와 잔류전단강도는 선형적인 관계를 보였으며, 전단변형률속도-잔류전단강도 관계의 기울기로써 결정되는 점성은 약 $73.60Pa{\cdot}s$로 산정되었다. 본 연구는 직접전단 장비가 산악지반 토석류 거동과 관련된 세립분의 전단강도 및 유변학적 정수 산정에 효과적으로 활용될 수 있음을 보여준다.