• Food Science and Biotechnology
• /
• 제15권2호
• /
• pp.264-269
• /
• 2006

Basic rheological data of dandelion leaf concentrates were determined to predict processing aptitude and usefulness of dandelion leaf concentrates as functional food materials. Hot water and 70% ethanol extracts of dandelion leaves were concentrated at 5, 20, and 50 Brix, and their static and dynamic viscosities, and Arrhenius plots were investigated. Most concentrated dandelion leaves extracted with hot water and 70% ethanol showed flow behaviors close to Newtonian fluid based on power law model evaluation. Apparent viscosity of concentrated dandelion leaves extracted with hot water and 70% ethanol decreased with increasing temperature. Yield stresses of concentrated dandelion leaves extracted with hot water and 70% ethanol by Herschel-Bulkley model application were 0.020-0.641 and 0.017-0.079 Pa, respectively. Activation energies of concentrated dandelion leaves extracted with hot water and 70% ethanol were $2.102-32.669{\times}10^3$ and $1.657-5.382{\times}10^3\;J/mol{\cdot}kg$ with increasing concentration, respectively. Loss modulus (G") predominated over storage modulus (G') at all applied frequencies, showing typical flow behavior of low molecular solution. G' and G" of concentrated dandelion leaves extracted with hot water slowly increased with increasing frequency compared to those of concentrated dandelion leaves extracted with 70% ethanol.

• 대한화장품학회지
• /
• 제22권2호
• /
• pp.167-173
• /
• 1996

The stability of gel structured emulsion and the effect of polyols on it have been studied by rheological property and interfacial tension. In this paper, three types of gel structured emulsions were prepared by using three polyols respectively(glycerine for sample 1, 1.3 BG for sample 2, PG for sample 3). And both complex modulus($G^*$) and loss angle[$\delta$ = tan-1(G"/G')] of samples were investigated against oscillating shear stress and frequency($\omega$). The results show sample 1 is most highly consistent with oscillating shear stress. And the results were compared with those of accelerated tests concerning storage stability of gel structured emulsion. To correlate consistency of rheological property with storage stability, interfacial tension from which adsorption efficiency of surfactant(Octyldodecyl Ether) could be known was measured. Sample 1 showed the largest value of [$d{\gamma}/dIn_{Cconc. of surfactant}$] in Gibbs equation. In summary, the prediction of stability could be correctly made by the consistency of rheological property(G*,$\gamma$) of gel structured emulsion against oscillating shear stress and it could be supported by measuring interfacial tension. And polyol affected the value of [$d{\gamma}/dIn_{Cconc. of surfactant}$], consequently affected the stability.lity.

• Archives of Plastic Surgery
• /
• 제51권1호
• /
• pp.14-19
• /
• 2024

Background Hyaluronic acid fillers can be manufactured using various processes. They have multiple properties, including their concentration, degree of modification, and rheological data. Cohesion is one such property to evaluate gel integrity; however, there is no standardized method for calculating this parameter. This study aimed to evaluate different tests for calculating hyaluronic acid cohesion and discuss the importance of hyaluronic acid cohesion as a consideration when selecting fillers. Methods The cohesion levels of five different hyaluronic acid fillers with different rheological properties were evaluated and compared using the drop weight, compression, tack, and dispersion time tests. Results The cohesion tests yielded different results in the samples. Samples 2 and 4 showed approximately two times the number of droplets when compared with Sample 5 in drop weight test. Samples 1, 2, 3, and 4 were superior to Sample 5 in tack test. Samples 1, 2, and 3 showed cohesive appearances at 95 seconds in most cases in dispersion test. Rheological test results did not reflect the measures of cohesion. Conclusion Although there are no definite standardized tests to evaluate the cohesion of hyaluronic acid fillers, our proposed tests showed similar results for different hyaluronic acid filler products. Further studies are needed to evaluate the cohesion of hyaluronic acid fillers and determine the clinical use of this distinguishing characteristic for clinicians selecting the product of choice. Level of evidence statement: These data are Level IV evidence.

• 동아시아식생활학회지
• /
• 제16권4호
• /
• pp.429-437
• /
• 2006

The quality of Jeung-pyun made with frozen rice batter was evaluated according to variations in the freezing temperature of the batter. The physicochemical sensory and rheological characteristics of Jeung-pyun were analyzed. The rice batter was stored at -20$^{\circ}C$, -40$^{\circ}C$, and -70$^{\circ}C$ for up to 4 weeks. Statistical data analysis was completed using the SAS program. The pH, and brix percentage of Jeung-pyun batter decreased during the fermentation. In carbon dioxide evolution during fermentation, the levels of the sample stored at -40$^{\circ}C$:, and -70$^{\circ}C$ for 3$\sim$4 weeks were significantly higher than that of the sample stored at -20$^{\circ}C$. The Jeung-pyun moisture content was not significantly affected by freezing temperature or storage times. Specific volume of Jeung-pyun made with rice batter stored at -40$^{\circ}C$, and -70$^{\circ}C$ for 4 weeks was significantly higher than that stored at -20$^{\circ}C$. In sensory evaluation of the stored sample for 4 weeks, the overall quality of Jeung-pyun was not significantly different between with the control and the -20$^{\circ}C$ sample, and between the control and the -40$^{\circ}C$ sample. Among the rheological properties measured with a rheometer on Jeung-pyun made with batter stored sample for 4 weeks at -20$^{\circ}C$, -40$^{\circ}C$ and unfrozen batter, the hardness was increased over the storage time, but the difference was not significant. In conclusion, the most suitable freezing temperature of the rice batter for the manufacture of Jeung-pyun was proposed to be -40$^{\circ}C$.

• 유변학
• /
• 제10권4호
• /
• pp.227-233
• /
• 1998

잠재성 경화제인 N-benzylpyrazinium hexafluoroantimonate(BPH)를 Cycloaliphatic계 에폭시 (CAE)/DGEBA계 에폭시의 혼합물에 1 mol% 첨가 시킨 후 혼합 조성비에 따른 유변학적 특성과 경화 동력학에 대해 연구하였다. 잠재특성은 등온 DSC를 이용하여 각각 $150^{\circ}C$와 $50^{\circ}C$의 반응 온도에 대한시간의 함수로서 전화량을 구하여 측정하였다. 블렌드 시스템의 유변학적 특성은 레오미터를 사용한 등온 실험을 통하여 storage modulus (G'), loss modulus (G") 그리고 damping factor (tan$\delta$)를 구한 후 이들 데이터로부터 겔화 시간을 측정하였다. 겔화 시간과 경화 온도를 Arrenius equation에 적용시킨 결과 가교 활성화 에너지 ($E_c$)를 구할 수 있었으며 겔화 시간과 활성화 에너지 모두 DGEBA의 함량이 증가할수록 증가하였다. 경화 활성화 에너지 ($E_a$)를 동적 DSC를 이용하여 Kissinger method에 의해 구하였는데 활성화 에너지는 CAE의 함량이 증가할수록 감소함으로써 높은 반응성을 나타내었는데, 이는 짧은 반복 단위와 단순한 곁사슬기 그리고 반응 매질 내의 점도 등에 기인한다.기인한다.

• 한국수산과학회지
• /
• 제46권2호
• /
• pp.139-146
• /
• 2013

Surimi products are among the most prominent seafoods in Korea. Together with fish meat, wheat flour is a major ingredient in the preparation of surimi products. Rice flour, however, can be an effective ingredient in enhancing the rheological characteristics of surimi products. In this study, we evaluated the potential of rice flour as an agent to replace wheat flour in surimi products. The effects of rice flour milling types and addition methods on the rheological and sensory properties of surimi products were investigated. Among different addition methods, the surimi product containing non-treated rice flour showed better gel strength and sensory properties than products containing paste (1:1.3 rice flour/water, w/v) and steamed paste (steamed at $100^{\circ}C$ for 30 min). According to the gel strength results for surimi products with added roll-mill (40 mesh) and jet-mill (180 mesh) rice flours, the roll-mill rice flour shows good potential as a replacement for wheat flour. When considering gel strength and sensory properties, an effective amount of rice flour to add was 10-15% (w/w). In conclusion, the rheological and sensory properties of surimi products containing rice flour were comparable with those of a premium commercial surimi product. Therefore, rice flour might be an effective alternative to wheat flour for premium surimi products.

• 한국도로학회논문집
• /
• 제7권4호
• /
• pp.203-210
• /
• 2005

바인더의 노화로 인한 성능변화는 침입도 또는 점도시험을 실시하여 판정하여왔다. 기존의 시험방법으로 아스팔트 바인더의 점탄성 특성과 실제거동을 평가할 수 없기 때문에 새로운 분석방법이 요구되어 왔다. 본 연구에서는 기존시험 방법을 사용하여 침입도지수와 잔류침입도를 판정하였고, 양방향 반복회전 모드와 일방향 반복회전 모드 시험을 실시하여 단기 노화된 아스팔트 바인더의 유변학적 특성을 분석하였다. 시험결과 단기 노화된 아스팔트 바인더는 시험주기(frequency) 즉, 차량속도의 변화에 따라 서로 다른 복합계수와 위상각을 나타냈으며 단기 노화 전후의 크리프 컴플라이언스 및 전단점도 시험결과에도 영향을 미치는 것으로 나타나서 포장 설계시 이러한 특성이 고려되어야 한다.

• 산업식품공학
• /
• 제15권4호
• /
• pp.297-304
• /
• 2011

혼합물실험계획법(mixture experimental design)을 적용하여 라면 밀가루 혼합비를 최적화하였다. 밀가루 혼합비를 최적화하기 위하여 전체 기호도(overall palatability)의 최대화, 반죽 레올로지 특성의 특정 범위 유지를 최적화의 목적으로 설정하였다. 라면은 가장 보편적인 미국산 밀가루 중 강력분인 DNS, 중력분인 HRW, 박력분인 SW를 simplex-lattice 방식에 의해 혼합비를 달리하여 제조하였다. 각 시료는 Rapid Visco Analyser(RVA), 파리노그래프, 익스텐소그래프를 이용하여 반죽의 레올로지 특성치를 측정하였으며, 조리된 라면의 전체 기호도를 관능 검사 하였다. 정준상관분석(canonical correlation analysis)를 통하여 RVA의 최고점도(PV), 파리노그래프의 반죽형성시간(DT), 익스텐소그래프의 R/E 45 min을 주요 반죽 레올로지 특성치로 선발하였다. 최적화 목적으로 전체 기호도의 최대화와 최고점도(PV)(최대화), 반죽형성시간(DT)(최소화) 및 R/E45 min(최대화)를 지정하였다. 그 결과 최적화된 밀가루 혼합비는 DNS 33.3%, HRW 33.3% 및 SW 33.3% 이였으며, 이때 전체 기호도는 5.825, 최고점도(PV)는 587.9 cP, 반죽형성시간(DT)은 3.1 min, R/E 45 min는 2.339 BU/mm로 나타났다.

• 한국축산식품학회지
• /
• 제42권2호
• /
• pp.210-224
• /
• 2022

The use of skim milk is a strategy to increase goat milk yogurt acceptability. However, it can negatively affect yogurt rheology because fat plays a vital role in dairy structural integrity. Thus, this study aimed to investigate the effects of fat replacers on the rheological, physical, and sensory parameters of low-fat cupuassu goat milk yogurts during refrigerated storage (28 days). Five goat milk yogurts formulations were carried out: whole yogurt (WY), skim yogurt (SY), skim yogurt with inulin (SIY), skim yogurt with maltodextrin (SMY), and skim yogurt with whey protein (SWY). Treatments were subjected to bacterial counts, chemical composition, pH, water holding capacity, instrumental color and texture, rheological and sensory analyses. All samples showed reducing pH values, water holding capacity, and L^* and b^* value during storage. Regarding texture, the firmness and consistency decreased during storage. On the other hand, the viscosity index significantly increased during refrigerated storage time. Moreover, all treatments exhibited viscoelastic behaviour. In addition, SIY and SMY showed the highest apparent viscosity. Furthermore, SIY, SMY, and SWY formulations exhibited positive sensory scores for appearance, color, aroma, texture, and viscosity. However, the overall acceptability and purchase intention did not differ statistically between WY and the fat-replacement treatments (SIY, SMY, and SWY). These results indicate that fat substitutes improved the quality of skimmed formulations. Thus, inulin and maltodextrin have the potential as functional fat replaces to produce low-fat goat milk yogurts.

• 대한기계학회논문집A
• /
• 제24권2호
• /
• pp.347-354
• /
• 2000

This paper presents performance characteristics of a semi-active suspension featuring continuously variable ER (electro-rheological) dampers. These are evaluated through the field test of a passeng er car. Four ER dampers (two for front and two for rear part) are manufactured and their field-dependent damping properties are experimentally investigated. The damping force responses to step input fields are also identified by employing small size of high voltage amplifiers which are made adaptable to the field test. A skyhook controller considering the vertical, pitch and roll motions is formulated and incorporated with a car to be tested. The field test is then undertaken in order to evaluate both comfortability and steering stability showing bump, dive and squat responses.