• 한국표면공학회지
• /
• 제50권4호
• /
• pp.237-243
• /
• 2017

We demonstrated the thin film deposition of sodium phosphorous oxynitride (NaPON) via RF magnetron sputtering of $Na_3PO_4$, as a solid-state Na-ion conductor similar to lithium phosphorous oxynitride (LiPON), which is a commonly used solid electrolyte. The deposited NaPON thin film was characterized by scanning electron microscopy, X-ray diffractometry, and electrochemical impedance spectroscopy, to investigate the feasibility of the solid-state electrolyte in several different cell configurations. The key properties of a solidstate electrolyte, i.e., ionic conductivity and activation energy, were estimated from the complex non-linear least square fitting of the measured impedance spectra at various temperatures in the range of $27-90^{\circ}C$. The ionic conductivity of the NaPON film was measured to be $8.73{\times}10^{-6}S\;cm^{-1}$ at $27^{\circ}C$, which was comparable to that of the LiPON film. The activation energy was estimated to be 0.164 eV, which was lower than that of the LiPON film (0.672 eV). The obtained values encourage the use of a NaPON thin film in the future as a reasonable solid-state electrolyte.

• 센서학회지
• /
• 제4권3호
• /
• pp.71-79
• /
• 1995

응답특성이 빠르고, 좁은 영역에서의 측정에 있어 매우 유리한 고 분해능의 광섬유 Fabry -Perot 간섭형 센서를 제조하기 위해 반사막으로 사용될 $TiO_{2}$ 박막의 형성법에 대해 조사하였다. RF magnetron sputtering 법을 이용하여 증착된 $TiO_{2}$ 박막은 굴절률이 $2.36{\sim}2.48$정도, 그리고 O/Ti의 원소조성비는 거의 2에 가까운 화학양론적인 조성비가 되어 e-beam 증착법으로 증착된 박막보다 우수한 특성을 나타내었다. 또한 용융 접합법을 사용하여 광섬유 선로내에 $TiO_{2}$ 반사막을 형성할 경우 RF 전력이 120W인 조건에서 증착된 반사막이 가장 큰 반사율을 나타내었을 뿐만 아니라 우수한 반사율 조절특성을 보였다. 광섬유 선로내에 이러한 조건에서 증착된 $TiO_{2}$ 반사막을 가지는 진성 광섬유 Fabry-Perot 간섭계는 매우 안정된 간섭특성을 나타내어 이를 여러가지 센서에 응용할 경우 고정도의 우수한 감지 특성을 나타낼 수 있을 것으로 기대된다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.603-603
• /
• 2013

3D 배열구조의 Vertical nanowire Integrated Nanogenerator (VING)은 낮은 출력, 유연 기판 상에 부적합, 나노선의 부서지기 쉬움, 장기 안정성, 균일한 나노선의 성장을 필요로 하는 문제점을 가지고 있다. 본 연구에서는 이러한 VING방식의 단점을 보완하여 2D 배열 구조의 Lateral nanowire Integrated Nanogenerator (LING)로 고출력 전압, 유연기판의 상에 적합 등을 개선하는 방향으로 연구를 하였다. 본 연구의 실험 방법으로는 RF magnetron sputter를 이용하여 AZO Seedlayer를 제작하였으며 제작된 AZO Seedlayer를 photolithography 공정으로 제작하였다. 패터닝된 샘플을 Hydro thermal synthesis method로 성장시켰다. 구조적 분석으로는 XRD, FE-SEM 등을 이용하여 측정하였다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2007년도 추계학술대회 논문집
• /
• pp.51-51
• /
• 2007

기존에 있는 Ti 합금의 여러 가지 단점을 보완하기 위해 골과의 탄성계수 차이를 줄이고 독성이 없는 Ta, Nb와 같은 ${\beta}$형 안정화 원소를 Ti 와 합금하여 Ti-30Ta-(3${\sim}$15wt%)Nb 합금을 제조하여 RF-magnetron sputter를 이용하여 Ti/HA 복합코팅을 하여 코팅된 합금의 전기화학적 특성을 조사하였다.

• Transactions on Electrical and Electronic Materials
• /
• 제15권6호
• /
• pp.328-332
• /
• 2014

Thin film transistors (TFTs) with an amorphous silicon zinc tin oxide (a-2SZTO) channel layer have been fabricated using an RF magnetron sputtering system. The effect of the change of excitation electron on the variation of the total interfacial trap states of a-2SZTO systems was investigated depending on sputtering power, since the interfacial state could be changed by changing sputtering power. It is well known that Si can effectively reduce the generation of the oxygen vacancies. However, The a-2SZTO systems of ZTO doped with 2 wt% Si could be degraded because the Si peripheral electron belonging to a p-orbital affects the amorphous zinc tin oxide (a-ZTO) TFTs of the s-orbital overlap structure. We fabricated amorphous 2 wt% Si-doped ZnSnO (a-2SZTO) TFTs using an RF magnetron sputtering system. The a-2SZTO TFTs show an improvement of the electrical property with increasing power. The a-2SZTO TFTs fabricated at a power of 30 W showed many of the total interfacial trap states. The a-2SZTO TFTs at a power of 30 W showed poor electrical property. However, at 50 W power, the total interfacial trap states showed improvement. In addition, the improved total interfacial states affected the thermal stress of a-2SZTO TFTs. Therefore, a-2SZTO TFTs fabricated at 50 W power showed a relatively small shift of threshold voltage. Similarly, the activation energy of a-2SZTO TFTs fabricated at 50 W power exhibits a relatively large falling rate (0.0475 eV/V) with a relatively high activation energy, which means that the a-2SZTO TFTs fabricated at 50 W power has a relatively lower trap density than other power cases. As a result, the electrical characteristics of a-2SZTO TFTs fabricated at a sputtering power of 50 W are enhanced. The TFTs fabricated by rf sputter should be carefully optimized to provide better stability for a-2SZTO in terms of the sputtering power, which is closely related to the interfacial trap states.

• 한국정보통신학회논문지
• /
• 제13권11호
• /
• pp.2385-2390
• /
• 2009

본 연구에서는 C-축 우선 배향 특성을 가지는 N-doped ZnO 박막을 증착하고 그 미세구조의 특성을 분석 비교하였다. ZnO박막은 $N_2O$ 가스 분위기에서 RF reactive magnetron sputtering 시스템을 사용하여 p-Si(100) 웨이퍼 위에 증착되었다. $N_2O$ 가스는 N doping source로 사용되었으며, 전체 가스 유량에 대한 $N_2O$ 가스의 비율 $N_2O/(N_2O+Ar)$과 증착 전력을 증착의 주요 공정 변수로 선택하여 다양한 가스 비율과 증착 전력에 대한 박막의 미세 구조 특성을 비교 분석하였다. 특히, Auger electron spectroscopy (AES)를 이용하여 ZnO 박막 내에 들어가 존재하는 불순물 N의 수직분포를 분석하였고, 여러 가지 증착 조건에서 제작된 ZnO 박막의 표면형상 및 미세구조 특성을 Scanning Electron Microscope (SEM)를 이용하여 분석하였다.

• 전기학회논문지
• /
• 제65권12호
• /
• pp.2014-2018
• /
• 2016

Transparent, conductive electrode films, showing the particular characteristics of good conductivity and high transparency, are of considerable research interest because of their potential for use in opto-electronic applications, such as smart window, photovoltaic cells and flat panel displays. Multilayer transparent electrodes, having a much lower electrical resistance than widely-used transparent conducting oxide electrodes, were prepared by using RF/DC magnetron sputtering system. The multilayer structure consisted of three layers, [NiInZnO(NIZO)/Ag/NIZO]. The optical and electrical properties of the multilayered NIZO/Ag/NIZO structure were investigated in relation to the thickness of each layer. The optical and electrical characteristics of multilayer structures have been investigated as a function of the Ag and NIZO film thickness. High-quality transparent conductive films have been obtained, with sheet resistance of $9.8{\Omega}/sq$ for Ag film thickness of 8 nm. Also the multilayer films of inserted Ag 8 nm thickness showed a high optical transmittance above 93% in the visible range. The electrical and optical properties of the new multilayer films were mainly dependent on the thickness of Ag insertion layer.

• 한국세라믹학회지
• /
• 제30권7호
• /
• pp.578-588
• /
• 1993

Highly c-axis oriented ferroelectric PbTiO3 thin films were deposited on MgO single crystal substrates by RF magnetron sputtering. We have studied the effects of substrate temperature, RF input power, gas comosition, gas pressure and deposition rate on the chemical and structural characteristics of PbTiO3 thin films. The epitaxy relationship of c-axis oriented films was found to be PbTiO3{100}//MgO(100) and their microstructures were highly mosaic. It was found that the most important parameter to achieve epitaxial PbTiO3 films was the substrate temperature. The activation energy for the epitaxy formation was about 0.92eV. Lower gas pressure and RF input power were favorable for the formation of epitaxial c-axis orientation. It was also found that the optimum oxygen content in Ar gas was 10% to obtain the stoichiometric PbTiO3 composition.

• The Korean Journal of Ceramics
• /
• 제4권1호
• /
• pp.9-14
• /
• 1998

Diamond-like carbon(DLC) films were deposited on buffer-layered ZnS substrates by radio frequency plasma enhanced chemical vapor deposition(RF-PECVD) method. Ge and GeC buffer layera were used between DLC and ZnS substrates to promote the adhesion of DLC on ZnS substrates. Ge buffer layers were sputter deposited by RF magnetron sputtering and $GeC^1$ buffer layers were deposited by same method except using acetylene reactive gas. The relatinship between film properties and deposition conditions was investigated using gas pressure, RF power and dc bias voltage as PECVD parameters. The hardness of DLC films were measured by micro Vickers hardness test and the adhesion of DLC films on buffer-layered ZnS substrates were studied by Sebastian V stud pull tester. The optical properties of DLC films on butter-layered ZnS substrates were characterized by ellipsometer and FTIR spectroscopy.

• 한국전기전자재료학회논문지
• /
• 제21권9호
• /
• pp.789-794
• /
• 2008

Zinc oxide (ZnO) has been widely studied for its practical applications such as transparent conduction electrodes for flat panel displays and solar cells. Especially, ZnO films show good chemical stability against hydrogen plasma, absence of toxicity, abundance in nature, and then suitable for photovoltaic applications. However, the fabrication process of thin film solar cells require a high substrate temperature and/or post heat treatment. Therefore, the layers have to withstand high temperatures, requiring an excellent stability without degrading their electronic and optical properties. In this paper, we investigated the stability of zinc oxide (ZnO) films doped with aluminum and hydrogen. Doped ZnO films were prepared by r.f. magnetron sputter and followed by heat treatment at different temperatures and for various times.