• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.5
• /
• pp.289-296
• /
• 2016

The availability of NMP, a solvent used in the manufacturing process of cathode material for lithium ion battery, depends on importation, and the price remains high because of the monopoly of BASF and ISP. For these reasons, most Lithium ion battery manufacturers reuse NMP after recovering it from the exhaust air in the drying process. In Korea, absorption method is mainly used for recovering NMP from the absorption tower using the hydrophilicity of NMP. However, this system has a few disadvantages, such as low purity (80％) of the recovered NMP and 100％ emission due to high water content of the treated gas. In this study, we develop a hybrid NMP recovery system by combining cooling condensation method with concentration method, by which it is possible to obtain an NMP recovery rate of 99.6％, and a high purity (96.1％) of the recovered NMP.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.3
• /
• pp.950-975
• /
• 2016

Device-to-Device (D2D) communication underlaying cellular networks is a promising add-on component for future radio communication systems. It provides more access opportunities for local device pairs and enhances system throughput (ST), especially when mobile relays (MR) are further enabled to facilitate D2D links when the channel condition of their desired links is unfavorable. However, mutual interference is inevitable due to spectral reuse, and moreover, selecting a suitable transmission mode to benefit the correlated resource allocation (RA) is another difficult problem. We aim to optimize ST of the hybrid system via joint consideration of mode selection (MS) and RA, which includes admission control (AC), power control (PC), channel assignment (CA) and relay selection (RS). However, the original problem is generally NP-hard; therefore, we decompose it into two parts where a hierarchical structure exists: (i) PC is mode-dependent, but its optimality can be perfectly addressed for any given mode with additional AC design to achieve individual quality-of-service requirements. (ii) Based on that optimality, the joint design of MS, CA and RS can be viewed from the graph perspective and transferred into the maximum weighted independent set problem, which is then approximated by our greedy algorithm in polynomial-time. Thanks to the numerical results, we elucidate the efficacy of our mechanism and observe a resulting gain in MR-aided D2D communication.

• Journal of Korea Multimedia Society
• /
• v.7 no.7
• /
• pp.1009-1016
• /
• 2004

Component-based development is being generalized as the spread of software reuse technology for rapid development productivity and high quality software.In the CBD, the identification of independent and reusable component is the one of important tasks for component-based system development. Because existing methodologies providing component identification techniques provide techniques based on heuristic techniques of component developer, it is difficult for general developers to identify components using these methods. Therefore, this paper suggests new identification factors and a technique by considering dependency characteristics according to method call types and method call directions and dependency degree. Furthermore, proposed technique is verified through case study; business components based on system components are identified effectively.

• Korean Journal of Computational Design and Engineering
• /
• v.21 no.3
• /
• pp.252-266
• /
• 2016

An architectural pre-design, which is conducted prior to the architecture design, supports fundamental configuration during the entire AEC project by predicting the cost, demand, etc., of the building, and is therefore gaining importance. In particular, the massing calculation of the pre-design phase should be prioritized, as it is fundamental to architectural outline. However, most architects depend on only their experience and intuition while conceptualizing an integrated framework of design conditions, including the building code and requirements for the massing calculation of the object. Therefore, many difficulties arise in terms of performing appropriate tasks. Thus, the purpose of this study is to implement a knowledge-based BIM for explicitly representing the design knowledge, which is the basis of decision making for an architect while performing the massing calculation. In particular, the 3D knowledge relevant to a project can be provided and accumulated in the massing calculation by the BIM system; this facilitates an integral understanding. Consequently, the approximate result of massing calculation in 3D BIM environment, through both the knowledge-based BIM template and plug-in, can be swiftly provided to the architect. In addition, the architect can invent various alternatives, estimate resulting costs, and reuse the accumulated knowledge in future BIM design processes.

• Journal of Microbiology and Biotechnology
• /
• v.23 no.6
• /
• pp.864-871
• /
• 2013

The recombinant strain P. pastoris GS115-lccC was used to produce laccase with high activity. Factors influencing laccase expression, such as pH, methanol concentration, copper concentration, peptone concentration, shaker rotate speed, and medium volume were investigated. Under the optimal conditions, laccase activity reached 12,344 U/L on day 15. The recombinant enzyme was purified by precipitating and dialyzing to electrophoretic homogeneity, and was estimated to have a molecular mass of about 58 kDa. When guaiacol was the substrate, the laccase showed the highest activity at pH 5.0 and was stable when the pH was 4.5~6.0. The optimal temperature for the laccase to oxidize guaiacol was $60^{\circ}C$, but it was not stable at high temperature. The enzyme could remain stable at $30^{\circ}C$ for 5 days. The recombinant laccase was used to degrade chlorpyrifos in several laccase/mediator systems. Among three synthetic mediators (ABTS, HBT, VA) and three natural mediators (vanillin, 2,6-DMP, and guaiacol), vanillin showed the most enhancement on degradation of chlorpyrifos. Both laccase and vanillin were responsible for the degradation of chlorpyrifos. A higher dosage of vanillin may promote a higher level of degradation of chlorpyrifos, and the 2-step addition of vanillin led to 98% chlorpyrifos degradation. The degradation of chlorpyrifos was faster in the L/V system ($k_{obs}$ = 0.151) than that in the buffer solution ($k_{obs}$ = 0.028).

• Journal of the Korean Society for information Management
• /
• v.20 no.1
• /
• pp.417-455
• /
• 2003

Ontologies are formal theories that are suitable for implementing the semantic web. which is a new technology that attempts to achieve effective retrieval, integration, and reuse of web resources. Ontologies provide a way of sharing and reusing knowledge among people and heterogeneous applications systems. The role of ontologies is that of making explicit specified conceptualizations. In this context, domain and generic ontologies can be shared, reused, and integrated in the analysis and design stage of information and knowledge systems. This study aims to design an ontology for international organizations. and build an Internet web retrieval system based on the proposed ontology. and finally conduct an experiment to compare the system performance of the proposed system with that of internet search engines focusing relevance and searching time. This study found that average relevance of ontology-based searching and Internet search engines are 4.53 and 2.51, and average searching time of ontology-based searching and Internet search engines are 1.96 minutes and 4.74 minutes.

• Fire Science and Engineering
• /
• v.26 no.3
• /
• pp.91-99
• /
• 2012

Fatal injuries and deaths have occurred resulting from the operation or disassembling of a powder extinguishers in Korea. If a rusted powder extinguisher is exploded during operation or disassembling, it rises to the air like a rocket and hits a head, chest, or neck part of an operator, resulting in his (her) death or injury. In this study examines the explosion accident cases of a powder fire extinguisher and analyzes their causes, reactions to explosion, and precautionary measures. And in this paper suggests 1) no using of old fire extinguishers in fire drill or education, 2) education and public information on danger of old fire extinguishers, 3) indication of explosion danger to cartridge-type dry chemical powder fire extinguishers had already placed to buildings etc., 4) obligatory indication of durable years on fire extinguishers, 5) examination for introduction of system that do hydraulic pressure test about fire extinguishers that given period past, 6) construction of system that reclaim old fire extinguishers, 7) construction of system that recycle or reuse old fire extinguishers, and 8) operation of help desk related to old fire extinguishers as precautionary measure of fire extinguisher explosion accidents.

• Journal of Korea Spatial Information System Society
• /
• v.3 no.1 s.5
• /
• pp.75-87
• /
• 2001

The advantages of using components result from their reusability between applications. Applications can be easily implemented by adding components. In this paper, we described the design and implementation process of ASC(Application Service Component) for component-based GIS applications. In our project, there are 5 applications : Road Facility Management, Urban Planning, Cadastral Map Management, Water Supply Management, and Sewerage Management. All of them use MapBase component which supports common GIS functionality. Although they are different applications, some parts of them are same. We analyzed the developed results in 1st and 2nd year, and the achievement of UIS(Urban Information System) project in Busan Metro City in Korea. The UIS of Busan was consisted of 5 applications to equal with our project. Then, we extracted 11 common used components between 5 applications, and implemented 5 common components of them and 2 additional components. They were Authority, GISReport, IndexMap, Measurement, Search, Symbol Manager, and Attribute Display. As we offered them to companies developing application components, they were able to reduce the development time.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.4
• /
• pp.1481-1500
• /
• 2016

Device-to-Device (D2D) communication underlaying macro-small cell networks, as one of the promising technologies in the era of 5G, is able to improve spectral efficiency and increase system capacity. In this paper, we model the cross- and co-tier D2D communications in two-tier macro-small cell networks. To avoid the complicated interference for cross-tier D2D, we propose a mode selection scheme with a dedicated resource sharing strategy. For co-tier D2D, we formulate a joint optimization problem of power control and resource reuse with the aim of maximizing the overall outage capacity. To solve this non-convex optimization problem, we devise a heuristic algorithm to obtain a suboptimal solution and reduce the computational complexity. System-level simulations demonstrate the effectiveness of the proposed method, which can provide enhanced system performance and guarantee the quality-of-service (QoS) of all devices in two-tier macro-small cell networks. In addition, our study reveals the high potential of introducing cross- and co-tier D2D in small cell networks: i) cross-tier D2D obtains better performance at low and medium small cell densities than co-tier D2D, and ii) co-tier D2D achieves a steady performance improvement with the increase of small cell density.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.10B
• /
• pp.988-993
• /
• 2009

In recent years, the development of ubiquitous computing technology as vital information anytime, anywhere to monitor and manage the demand for U-healthcare services is increasing. Accordingly, remote blood sugar management, remote blood pressure management, and research on U-healthcare service have been very active. But, the existing U-healthcare service monitoring devices and services has been implemented in different operating platforms and programing languages which are provided by diverse application service providers. For this reason, the users have difficulty in receiving diverse U-healthcare services. In this paper, SOA-based U-healthcare monitoring system has been designed and implemented. Through implementation, it is confirmed that the proposed SOA based U-healthcare monitoring system can increase the reuse of each service component to make it easier to reconstruct the structure of the new services.