• 한국연소학회지
• /
• 제10권4호
• /
• pp.33-40
• /
• 2005

The propagation rates of advancing and retreating non-premixed edge flames in a slot-jet counterflow were measured as a function of strain rate for varying jet spacing, mixture strength, stoichiometric mixture fractions $(Z_{st})$ and Lewis numbers (Le). Methane and propane fuels were tested and nitrogen and carbon dioxide were used as inerts. As results, we could identify igniting fronts, retreating fronts, two total extinction limits, and short-length edge flames. A burner separation affected to a low extinction limit only. Regimes for advancing and retreating edges together with total extinction were mapped in terms of normalized flame thickness and heat loss factor for $CH_4/O_2/N_2$ mixtures. Edge flames for $Z_{st}$ > 0.5 behaved like a stronger mixture while for $Z_{st}$ < 0.5 showed deteriorated feature, because of relative locations of a non-premixed flame and intermediate species such as CO and $H_2$. Furthermore, due to the relative importance of heat loss, propagating speeds of edge flames were significantly enhanced in $CH_4/O_2/CO_2$ mixtures (Le < 1) demonstrating increasing stability limits. However $C_3H_8/O_2/N_2$ mixtures (Le > 1) showed opposite result.

• 대한기계학회논문집A
• /
• 제33권2호
• /
• pp.108-113
• /
• 2009

The mixing of two dissimilar aluminum alloys in friction stir welding (FSW) was investigated using etching. The results show that the materials from the retreating side mixed into the advancing side in rather narrow and elongated bands whereas the materials from the advancing side mixed into the retreating side in the form of thick bands and lobes. A computational method using smoothed particle hydrodynamics (SPH) is introduced as a way to properly describe the complex mixing behavior in FSW.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2003년도 춘계학술발표대회 개요집
• /
• pp.176-178
• /
• 2003

The weld zone of dissimilar formed Al alloy exhibited the complex structure of the two materials and mainly composed of the retreating side material. The mechanical properties were also depended on the dominant microstructure of the weld zone with welding conditions. The different mechanical properties of weld zone with welding conditions were related to the behavior of the precipitates of wrought Al alloy and Si particles of cast Al alloy. The higher mechanical properties of weld were acquired when relatively harder material, wrought Al alloy, was fixed at the retreating side.

• Journal of Advanced Marine Engineering and Technology
• /
• 제35권1호
• /
• pp.75-81
• /
• 2011

이종합금인 알루미늄 합금 6061-T6와 알루미늄 합금 5083-O의 용접을 위해 마찰교반 용접기술을 사용하였다. 마찰교반 용접된 이종 접합부에 대하여 기계적 특성, 경도 및 조직변화를 관찰하였다. 용접재의 기계적특성은 후진 측에 위치한 알루미늄 합금의 교반영역에 형성되는 미세조직이 주요한 변수로 작용하였다. 이종 알루미늄 합금이 교차한 양파 모양 형상의 얇은 층을 이루었다. 미세조직관찰에서 공구회전방향과 무관하게 이종합금 접합부에 기공이 관찰되지 않았으나 6061-T6 쪽 열영향부 영역에서 결정립 조대화기 뚜렷하였다. 본 논문의 연구결과, 결함이 없는 최상의 용접조건은 Al 6061-T6를 공구 진행방향에 전진 측에, Al 5083-O를 후진 측에 위치하고, 이송속도 124 mm/min, 1250 rpm의 공구의 회전수, 5 mm의 프루브 직경, 4.5 mm의 프루브 길이, 20 mm의 공구어깨, $2^{\circ}$의 공구 경사각 이다. 이때 용접재의 최대인장강도는 231 MPa이였고, 항복강도는 121 MPa을 나타내었다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2006년도 제33회 KOSCO SYMPOSIUM 논문집
• /
• pp.60-64
• /
• 2006

Propagation rates ($U_{edge}$) of various premixed, twin edge-flames were measured as a function of global strain rate ($\sigma$), mixture strength, and Lewis number (Le). Using a counterflow slot-jet burner with electrical heaters at each end, both advancing (positive $U_{edge}$) and retreating (negative $U_{edge}$) edge-flames can be studied as they propagate along the long dimension of the burner. Experimental results are presented for premixed methane/air twin flames in terms of the effects of $\sigma$ on $U_{edge}$. Both low-$\sigma$ and high-$\sigma$ extinction limits were discovered for all mixtures tested. As a result, the domain of edge-flame stability was obtained in terms of heat loss factor and normalized flame thickness, and comparison with the numerical result of other researchers was also made. For low ($CH_4/O_2/CO_2$) and high ($C_3H_8$/air) Lewis number cases, propagation rates clearly show a strong dependence on Le.

• 한국연소학회지
• /
• 제14권1호
• /
• pp.25-30
• /
• 2009

Propagation rates ($U_{edge}$) of various premixed, twin edge-flames were measured as a function of global strain rate ($\sigma$), mixture strength, and Lewis number (Le). Using a counterflow slot-jet burner with electrical heaters at each end, both advancing (positive $U_{edge}$) and retreating (negative $U_{edge}$) edge-flames can be studied as they propagate along the long dimension of the burner. Experimental results are presented for premixed methane/air twin flames in terms of the effects of $\sigma$ on $U_{edge}$. Both low-$\sigma$ and high-$\sigma$ extinction limits were discovered for all mixtures tested. As a result, the domain of edge-flame stability was obtained in terms of heat loss factor and normalized flame thickness, and comparison with the numerical result of other researchers was also made. For low ($CH_4/O_2/CO_2$) and high ($C_{3}H_{8}$/air) Lewis number cases, propagation rates clearly show a strong dependence on Le.

• 한국위성정보통신학회논문지
• /
• 제12권1호
• /
• pp.34-37
• /
• 2017

본 논문은 I/Q 채널을 다 이용하여 표적의 후퇴와 접근을 감지하는 연속파 레이다의 신호처리에 대하여 분석한다. 표적이 레이다로부터 접근 혹은 후퇴할 때 Quadrature 신호의 위상이 달라지는 것을 이용하여 물체의 후퇴와 접근을 감지하며, 상용 MMIC칩과 MCU를 이용하여 모듈을 구현하고, MMIC로부터 나온 수신데이터를 분석하여 검증하였다. 또한 사람을 대상으로 접근, 후퇴하는 동작에 대한 신호처리를 MCU를 사용하여 확인하였다. 사용한 주파수는 24.125GHz이며, 송신기 출력전력은 7.2 dBm이다. 실제 구현한 레이다로 최대 검출가능거리는 약 12m를 달성하였다.

• 동굴
• /
• 제63호
• /
• pp.61-79
• /
• 2004

프랜츠 요셉 빙하는 해발고도 250 m의 낮은 고도에 위치한다. 프랜츠 요셉 빙하는 낮은 고도에도 불구하고 타즈만해에서 불어오는 습윤한 편서풍과 고산의 지형적 특색으로 빙하가 존재한다. 지난 소빙기를 끝으로 지구의 기후 온난화로 빙하는 점점 후퇴하고 있으며 2002년과 2003년 사이에도 빙하는 후퇴했다. 후퇴의 원인을 기후요소로 비교 분석하여 후퇴의 원인이 기후에 있음을 확인하였다 빙하 주변에 알파인 단층이 지나가며 변성암이 분포하고 빙하 후퇴의 흔적으로 찰흔과 그루브가 다수 관찰되고 있다

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2006년도 제32회 KOSCO SYMPOSIUM 논문집
• /
• pp.7-12
• /
• 2006

The propagation rates ($U_{edge}$) of various premixed edge-flames were measured as a function of global strain rate (${ \sigma}$), mixture strength, and Lewis number (Le). Using a counterflow slot-jet burner with electrical heaters at each end, both advancing (positive $U_{edge}$) and retreating (negative $U_{edge}$) edges can be studied as they propagate along the long dimension of the burner. Preliminary results are presented for single and twin premixed hydrocarbon edge-flames in terms of the effects on $U_{edge}$. A low-${\sigma}$ extinction limit has been discovered for all mixtures tested but further analysis is necessary for full characterization since sufficiently $high-{\sigma}$ leads to an apparent stability limit. Propagation rates clearly show a strong dependence on Le. Future work will focus on completing the premixed hydrocarbon edge-flame analysis and include investigations into non-premixed edge-flames and edge-flames composed of fuels such as hydrogen ($H_2$) with significantly lower Le.

• 소성∙가공
• /
• 제29권1호
• /
• pp.11-19
• /
• 2020

For microstructural analysis of a friction stir welded (FSWed) joint of advanced high-strength steels, dual phase (DP) and complex phase (CP) steels, are studied. FSWed joints are successfully fabricated in the following four cases: (i) DP/DP; (ii) CP/CP; (iii) DP/CP, where the advancing side is DP and the retreating side is CP; (iv) CP/DP, where the advancing side is CP and the retreating side is DP. The stir zone (SZ) of (i) the DP/DP joint mainly consists of lath martensite, while the stir zone of (ii) the CP/CP joint consists not only of lath martensite but also of bainite. In the case of (iii) DP/CP and (iv) CP/DP, they exhibit a similar microstructure including acicular-shaped phases in the joints; however, cross-sections of the joints show differences in material mixing in each case. In (iv) the CP/DP joint, temperature towards the CP steel is sufficient to cause softening, thus leading to better mixing than that in (iii) DP/CP. The phases of the SZ in each of the four cases are formed by phase transformation during the FSWed process; however, the transformed phase volume fraction of CP steel is lower than that of DP steel, indicating that dynamic recrystallization occurs mainly in CP steel. The hardness values of the SZ are significantly higher than those of the base materials, especially, the SZ of (iii) the DP/CP joint has the highest value due to highest fraction of lath martensite.