• Korean Chemical Engineering Research
• /
• v.44 no.6
• /
• pp.659-668
• /
• 2006

The optimization of supercritical water oxidation (SCWO) process for decomposing nitromethane was studied by means of a design of experiments. The optimum operating region for the SCWO process to minimize COD and T-N of treated water was obtained in a lab scale unit. The authors had compared the results from a SCWO pilot plant with those from a lab scale system to explore the problems of scale-up of SCWO process. The COD and T-N in treated waters were selected as key process output variables (KPOV) for optimization, and the reaction temperature (Temp) and the mole ratio of nitromethane to ammonium hydroxide (NAR) were selected as key process input variables (KPIV) through the preliminary tests. The central composite design as a statistical design of experiments was applied to the optimization, and the experimental results were analyzed by means of the response surface method. From the main effects analysis, it was declared that COD of treated water steeply decreased with increasing Temp but slightly decreased with an increase in NAR, and T-N decreased with increasing both Temp and NAR. At lower Temp as $420{\sim}430^{\circ}C$, the T-N steeply decreased with an increase in NAR, however its variation was negligible at higher Temp above $450^{\circ}C$. The regression equations for COD and T-N were obtained as quadratic models with coded Temp and NAR, and they were confirmed with coefficient of determination ($r^2$) and normality of standardized residuals. The optimum operating region was defined as Temp $450-460^{\circ}C$ and NAR 1.03-1.08 by the intersection area of COD < 2 mg/L and T-N < 40 mg/L with regression equations and considering corrosion prevention. To confirm the optimization results and investigate the scale-up problems of SCWO process, the nitromethane was decomposed in a pilot plant. The experimental results from a SCWO pilot plant were compared with regression equations of COD and T-N, respectively. The results of COD and T-N from a pilot plant could be predicted well with regression equations which were derived in a lab scale SCWO system, although the errors of pilot plant data were larger than lab ones. The predictabilities were confirmed by the parity plots and the normality analyses of standardized residuals.

• Progress in Medical Physics
• /
• v.17 no.1
• /
• pp.1-5
• /
• 2006

A parallel plate detector containing PTFE films in FEP film for relative dosimetry was designed to measure the response of detectors to S and 10 MV X-rays from a medical linear accelerator through different thicknesses of lead. The dielectric materials were 100 m thick. The set-up conditions for measurements with this detector were as follows: SSD=100 cm the test detector was at a depth of 5 cm and the reference chamber was at a depth of 10 cm from the phantom surface for 6 and 10 MV X-rays. Lead blocks were designed to cover the irradiated field. They were added to the tray to increase thickness sequentially. We found that the detector response decreased exponentially with the thickness of lead added. The linear attenuation coefficients of the test detector and reference chamber were 0.1414 and 0.541, respectively, for 6 MV X-rays and 0.1358 and 0.5279 for 10 MV X-rays. The test detector response was greater than that of the reference chamber. The response function was calculated from the measured values of the test detector and reference chamber using optimization. These optimized constants for the detector response function were independent of theenergy. As a result of optimizing the response function between detectors, the use of a relative dosimeter was validated, because the response of the test detector was 1% for 6 MV X-rays and 4% for 10 MV X-rays.

• Journal of Ginseng Research
• /
• v.24 no.3
• /
• pp.118-122
• /
• 2000

This study was carried out to determine the optimal liquid medium composition of ginseng (Panax ginsengC.A. Meyer) root induced by growth regulators in order to improve the yield of saponin production. Submerged culture conditions were optimized using the fractional factorial design with 4 factors and 3 levels by a RSM computer program The effects of various pH values of medium, sucrose, nitrogen and phosphate concentration on the saponin content of the ginseng root were investigated. The optimum phosphate concentration determined by a partial differentiation of the model equation, pH of medium, sucrose and nitrogen concentration were phosphate 93 mg/L, pH 5.5, sucrose 5% and nitrogen 50 mg/L, respectively. Under these conditions, the predicted saponin content of ginseng root was estimated at 0.308%.

• Microbiology and Biotechnology Letters
• /
• v.48 no.1
• /
• pp.12-23
• /
• 2020

Edible films containing antimicrobial agents can be used as safe alternatives to preserve food products. Essential oils are well-recognized antimicrobials. However, their low water solubility, volatility and high sensitivity to oxygen and light limit their application in food preservation. These limitations could be overcome by embedding these essential oils in complexed product matrices exploiting the encapsulation efficiency of β-cyclodextrin. This study focused on the maximization of β-cyclodextrin production using cyclodextrin glucanotransferase (CGTase) and the evaluation of its encapsulation efficacy to fabricate edible antimicrobial films. Response surface methodology (RSM) was used to optimize CGTase production by Brevibacillus brevis AMI-2 isolated from mangrove sediments. This enzyme was partially purified using a starch adsorption method and entrapped in calcium alginate. Cyclodextrin produced by the immobilized enzyme was then confirmed using high performance thin layer chromatography, and its encapsulation efficiency was investigated. The clove oil/β-cyclodextrin inclusion complexes were prepared using the coprecipitation method, and incorporated into chitosan films, and subjected to antimicrobial testing. Results revealed that β-cyclodextrin was produced as a major product of the enzymatic reaction. In addition, the incorporation of clove oil/β-cyclodextrin inclusion complexes significantly increased the antimicrobial activity of chitosan films against Staphylococcus aureus, Staphylococcus epidermidis, Salmonella Typhimurium, Escherichia coli, and Candida albicans. In conclusion, B. brevis AMI-2 is a promising source for CGTase to synthesize β-cyclodextrin with considerable encapsulation efficiency. Further, the obtained results suggest that chitosan films containing clove oils encapsulated in β-cyclodextrin could serve as edible antimicrobial food-packaging materials to combat microbial contamination.

• The Korean Journal of Food And Nutrition
• /
• v.28 no.1
• /
• pp.153-159
• /
• 2015

This study was conducted to develop food for the elderly, which are well-shaped and easy to chew and swallow. The amounts of water and gelatin were adjusted to facilitate breaking down of the food with the tongue. In the aging society, it is necessary to support the development of a variety of products that can ease the intake functions of swallowing and chewing, while complementing with the essential nutrients supplements; such products can be actively commercialized in the elderly industry. Various types of food, for elderly with difficulties in chewing and swallowing, were used for sensory assessment. Sensory panel consisted of 10 dietitians (10 women) in nursing care facilities. The sensory optimal composite recipes were determined by central composite design (CCD). The sensory measurements were significantly different in the appearance (p<0.01), saltiness (p<0.01) and overall quality (p<0.01). The optimum formulation of pan fried flat fish, calculated by numerical and graphical method, was 8.54 g of salt and 6.34 g of olive oil. Moisture content, hardness, and adhesiveness of pan fried flat fish were 84.77%, 250, and -1.20, respectively. The result showed that easily chewable and swallowable pan fried flat fish for the elderly will have sufficient competitiveness, considering its safety, taste, and preference. This study may provide the basic materials for the development of easily chewable and swallowable foods for elderly.

• The Korean Journal of Food And Nutrition
• /
• v.27 no.6
• /
• pp.1175-1181
• /
• 2014

This study was conducted to develop for the elderly food that is safe, well-shaped, and easy to chew and swallow, using gelification. Gelatin, which has low adhesiveness, thereby lowering the possibility of being swallowed wrongly into the respiratory track, was used as a viscosity agent for the gelification. Water and gelatin amounts were adjusted to facilitate breaking the food with the tongue. Various foods for the elderly with chewing and swallowing difficulties were used for sensory assessment. Sensory panel consisted of 10 dietitians (10 women) in nursing care facilities. The sensory optimal composite recipes were determined by central composite design (CCD). The sensory measurements were significantly different in appearance (p<0.05), saltiness (p<0.05), sweetness (p<0.01), and overall quality (p<0.05). The optimum formulation of the Korean barbecue beef calculated by numerical and graphical method was 3.71 g of sugar and 19.53 g of soy sauce. Moisture content, hardness and adhesiveness of the Korean barbecue beef were 78.85%, 2.40, -1.87, respectively. The result shows that food for the elderly, which is easy to chew and swallow, using gelification will have sufficient competitiveness in terms of safety, taste, and preference. The development of food for the elderly that take into account the difficulties in chewing and swallowing among the elderly, reflects their preference, and has sufficient nutrients, is important to enable the elderly to enjoy their meals. Also, as the Korean society is getting older, it remains one of the biggest social challenges.

• The Korean Journal of Food And Nutrition
• /
• v.30 no.2
• /
• pp.319-325
• /
• 2017

In this study, we optimized the coffee extraction conditions for instant coffee production in two stage percolators, which is the most common coffee extractor for instant coffee production. A central composite design was used to build mathematical model equations for response surface methodology (RSM). In these equations, the yield and overall acceptability of the coffee extracts were expressed as second-order functions of three factors, the feed water temperature, draw-off factor (DOF), and extraction time (cycle time). Based on the result of RSM, the optimum conditions were obtained with the use of desirability function approach (DFA) which find the best compromise area among multiple options. The optimum extraction conditions to maximize the yield and overall acceptability over 40% of yield were found with $163^{\circ}C$ of feed water temperature, 4.3 of DOF and 27 minutes of extraction time (cycle time). These results provide a basic data for the coffee extraction conditions for the competitive instant coffee in the industry.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.12
• /
• pp.4697-4706
• /
• 2010

This paper suggested the optimal operating design method using simulation and ANP(Analytic Network Process) for mass-customization in the automotive component manufacturing industry. For this, first of all, we built the simulation model including various and complex factors in the field, and estimated the meta-model by RSM(Response Surface Method). Secondly using ANP, we calculated the weight of relative importance of evaluation factors gathered from decision makers. And then, we proposed the optimal operation designs by MOGA(Multi-Objective Genetic Algorithm), analyzed results of them. Moreover, by comparing the results with the consequences using AHP(Analytic Hierarchy Process), we showed its superiority of suggested method to the manner using AHP, because it reflects inner, outer dependency, and inter-relation among judgement factors. In conclusion, through this process, we can present the better way to serve mover effective, precise, and accurate information to decision makers when they build operation design for mass-customization system as automotive parts production system.

• Journal of the Korean Society of Food Culture
• /
• v.16 no.2
• /
• pp.170-179
• /
• 2001

Green Tea consists of 15-30% catechins (a type of polyphenol), which act as super antioxidants, inhibitory action against aging process. Antioxidants fight radical-free oxygen, an agent which can begin the process of cancer by damaging essential body chemicals and harming DNA. This study was peformed to develop the elderly diet using Green Tea as an inhibitory action against aging process. Nokchaborijook (Baley gruel added rice powder and Green Tea) was manufactured by various levels of Green Tea(1, 4, 7%) and the grinding period(15, 30, 45 sec). The optimum levels of added Green Tea and grinding periods on Nokchaborijook were determined with the results of sensory evaluation by response surface methodology and analysis of composition. The Anti-oxidant Vitamin A, C, E and Flavonoid were increased with increased levels of Green Tea and grinding periods be decreased. As the levels of Green Tea and grinding periods were increased, the green color and penetrated force became stronger. Among the sensory attributes, Bitterness, Green Tea Flavor and Hashness were greater depending on increasing Green Tea. Jujube flavor was greater relying on decreasing Green Tea. Greenness and spreadability of particles were increased as both the amounts of Green Tea and the grinding period were increased. This result was used to determine the optimum conditions of adding levels of Green Tea and grinding periods. The optimum conditions of Nokchaborijook was established as adding of 5.8% Green Tea grinded for 15 seconds.

• Journal of Microbiology and Biotechnology
• /
• v.28 no.5
• /
• pp.697-706
• /
• 2018

Lactobacillus pentosus K1-23 was selected from among 25 lactic acid bacterial strains owing to its high inhibitory activity against several pathogenic bacteria, including Escherichia coli, Salmonella typhimurium, S. gallinarum, Staphylococcus aureus, Pseudomonas aeruginosa, Clostridium perfringens, and Listeria monocytogenes. Additionally, among 13 strains of Aureobasidium spp., A. pullulans NRRL 58012 was shown to produce the highest amount of ${\beta}$-glucan ($15.45{\pm}0.07%$) and was selected. Next, the optimal conditions for a solid-phase mixed culture with these two different microorganisms (one bacterium and one yeast) were determined. The optimal inoculum sizes for L. pentosus and A. pullulans were 1% and 5%, respectively. The appropriate inoculation time for L. pentosus K1-23 was 3 days after the inoculation of A. pullulans to initiate fermentation. The addition of 0.5% corn steep powder and 0.1% $FeSO_4$ to the basal medium resulted in the increased production of lactic acid bacterial cells and ${\beta}$-glucan. The following optimal conditions for solid-phase mixed culture were also statistically determined by using the response surface method: $37.84^{\circ}C$, pH 5.25, moisture content of 60.82%, and culture time of 6.08 days for L. pentosus; and $24.11^{\circ}C$, pH 5.65, moisture content of 60.08%, and culture time of 5.71 days for A. pullulans. Using the predicted optimal conditions, the experimental production values of L. pentosus cells and ${\beta}$-glucan were $3.15{\pm}0.10{\times}10^8CFU/g$ and $13.41{\pm}0.04%$, respectively. This mixed culture may function as a highly efficient antibiotic substitute based on the combined action of its anti-pathogenic bacterial and immune-enhancing activities.