• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.503-509
• /
• 2019

The demand for smaller, faster, and multi-functional mobile devices in increasing at a rapidly increasing rate. In response to these trends, Stacked Chip Scale Package (SCSP) is used widely in the assembly industry. A film type adhesive called die attach film (DAF) is used widely for bonding chips in SCSP. The DAF requires high flowability at high die attachment temperatures for bonding chips on organic substrates, where the DAF needs to feel the gap depth, or for bonding the same sized dies, where the DAF needs to penetrate bonding wires. In this study, the mixture design of experiment (DOE) was performed for three raw materials to obtain the optimized DAF recipe for low elastic modulus at high temperature. Three components are acrylic polymer (SG-P3) and two solid epoxy resins (YD011 and YDCN500-1P) with different softening points. According to the DOE results, the elastic modulus at high temperature was influenced greatly by SG-P3. The elastic modulus at $100^{\circ}C$ decreased from 1.0 MPa to 0.2 MPa as the amount of SG-P3 was decreased by 20%. In contrast, the elastic modulus at room temperature was dominated by YD011, an epoxy with a higher softening point. The optimized DAF recipe showed approximately 98.4% pickup performance when a UV dicing tape was used. A DAF crack that occurred in curing was effectively suppressed through optimization of the cure accelerator amount and two-step cure schedule. The imizadole type accelerator showed better performance than the amine type accelerator.

• Journal of the Korean Society of Radiology
• /
• v.13 no.5
• /
• pp.757-763
• /
• 2019

Recently, Following the recent development of flat panel detector with wide dynamic ranges, increasing numbers of healthcare providers have begun to use digital radiography. As a result, filter thickness standards should be reestablished, as current clinical practice requires the use of thicknesses recommended by the National Council on Radiation Protection and Measurements, which are based on information, acquired using conventional analog systems. Here we investigated the possibility of minimizing dose creep and optimizing patient dose using Al filters in digital radiography. The use of thicker Al filters resulted in a maximum 19.3% reduction in the entrance skin exposure dose when medical images with similar sharpness values were compared. However, resolution, which is a critical factor in imaging, had a significant change of 1.01 lp/mm. This change in resolution is thought to be due to the increased amount of scattered rays generated from the object due to the X-ray beam hardening effect. The increase in the number of scattered rays was verified using the scattering degradation factor. However, the FPD, which has recently been developed and is widely used in various areas, has greater response to radiation than analog devices and has a wide dynamic range. Therefore, the FPD is expected to maintain an appropriate level of resolution corresponding to the increase in the scattered-ray content ratio, which depends on filter thickness. Use of the FPD is also expected to minimize dose creep by reducing the exposure dose.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.261-267
• /
• 2020

The demand for faster, lighter, and thinner portable electronic devices has brought about a change in semiconductor packaging technology. In response, a stacked chip-scale package(SCSP) is used widely in the assembly industry. One of the key materials for SCSP is a die-attach film (DAF). Excellent flowability is needed for DAF for successful die attachment without voids. For DAF with high flowability, two-step curing is often required to reduce a cure crack, but one-step curing is needed to reduce the processing time. In this study, DAF composition was categorized into three groups: cure (epoxy resins), soft (rubbers), hard (phenoxy resin, silica) component. The effect of the composition on a cure crack was examined when one-step curing was applied. The die-attach void and flowability were also assessed. The cure crack decreased as the amount of hard components decreased. Die-attach voids also decreased as the amount of hard components decreased. Moreover, the decrease in cure component became important when the amount of hard component was small. The flowability was evaluated using high-temperature storage modulus and bleed-out. A decrease in the amount of hard components was critical for the low storage modulus at 100℃. An increase in cure component and a decrease in hard component were important for the high bleed-out at 120℃(BL-120).

• Korean Journal of Clinical Pharmacy
• /
• v.31 no.4
• /
• pp.257-267
• /
• 2021

Background: The need for regulatory science development to evaluate advanced regulatory products is gradually increasing without hindering the technological development. Creating a research environment and fostering experts through the establishment of regulatory agency-led policies are essential for the development of regulatory science. Method: This is a comparative study of the United States, Japan, Singapore, and Korea. The literature and websites of each regulatory agency were reviewed, and the focus was on advantages and comparing advantages based on definition, development trends, and expert training projects. Results: The United States is striving to develop regulatory science in response to changes in the new pharmaceutical industry through the regulatory science report, and to foster expert both inside and outside the Food and Drug Administration (FDA). Japan is promoting regulatory science centered on regulatory science centers, and is focusing on researching work-related regulatory science within the Pharmaceuticals and Medical Devices Agency (PMDA) and improving employees' ability to make regulatory decisions. Singapore was aiming to improve Southeast Asia's regulatory capabilities under the leadership of Centre of Regulatory Excellence (CoRE) within Duke-NUS University. In 2021, Korea is in its early stages, starting to run a university's degree program related to regulatory science this year. Conclusion: Regulatory science should be developed with the aim of improving the regulatory ability of the Ministry of Food and Drug Safety with Korea's independent concept of regulatory science.

• Journal of Internet of Things and Convergence
• /
• v.8 no.5
• /
• pp.119-125
• /
• 2022

With the recent increase in dementia patients due to aging, measures to prevent their wandering behavior and disappearance are urgently needed. To solve this problem, various authentication methods and location detection techniques have been introduced, but the security problem of personal authentication and a system that can check indoor and outdoor overall was lacking. In order to solve this problem, various authentication methods and location detection techniques have been introduced, but it was difficult to find a system that can check the security problem of personal authentication and indoor/outdoor overall. In this study, we intend to propose a system that can identify personal authentication, basic health status, and overall location indoors and outdoors by using wristband-type wearable devices in a private blockchain environment. In this system, personal authentication uses ECG, which is difficult to forge and highly personally identifiable, Bluetooth beacon that is easy to use with low power, non-contact and automatic transmission and reception indoors, and DGPS that corrects the pseudorange error of GPS satellites outdoors. It is intended to detect wandering behavior and abnormal signs by locating the patient. Through this, it is intended to contribute to the prompt response and prevention of disappearance in case of wandering behavior and abnormal symptoms of dementia patients living at home or in nursing homes.

• Journal of Appropriate Technology
• /
• v.6 no.2
• /
• pp.256-270
• /
• 2020

The collapse of the medical and healthcare system in the pandemic is resulting in the voluntary participation of civil society and a new way of responding. Some of new countermeasure can be immediately utilized at the forefront of the health crisis. Appropriate technology is no longer an intermediate technology, demonstrating its role as a technology capable of overcoming the crisis of not only developing countries but also any countries where the health system has collapsed. In this Part 2, examples of health fields such medical devices as negative pressure chambers and ventilators, diagnostic chips, and diagnostic techniques, are being discussed as a quick response to the collapse of health systems under COVID-19, within the framework of appropriate technologies. Finally, the important role of scientists and engineers is discussed for the prevention of severe impacts on the vulnerable people in terms of socioeconomic status.

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.5
• /
• pp.27-35
• /
• 2020

In 2020, one after another, musicians started to hold non-contact online concerts as the pop music industry began to shrink due to the unprecedented "Covid-19" incident, in seeking for various channels and alternatives. Taking this into account, this study conducted a survey with BTS' "Bang Bang Con The Live" as the subject that was held June 2020 to see if they were qualified as an alternative format for quarantine-focused non-contact concerts. The survey was carried out with the content analysis of online concert videos participated by music experts and by collecting evaluations and alternative suggestions from the audiences. The study showed that the sample performance video well fulfilled the actual feels of offline concert elements (field visualization, face-to-face interaction, and responsive behavior), satisfaction, and convenience as an alternative concert format as an emergency correspondence. However, it was analyzed that there was a serious lack of empathy and realism with fans. Therefore, the study showed the possibility that BTS' "Bangbangcon The Live" will function as an alternative format for non-contact concerts, but suggests that measures such as supplementing digital communication systems and technology devices must be taken to be recognized as a level of settlement in the global music community as well as in Korea.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.6 no.10
• /
• pp.373-382
• /
• 2016

Under the Agricultural technology is influenced from climate that is requisite of seasonal. So this system will cover the problems and develop the agricultural industry as well. So far, the agricultural industry is developing however, it has the points of the weakness because of natural disasters such as wind risk and heavy snow. This paper designs system to change vinyl on the greenhouse. This is a preliminary study for the real-time feedback control of greenhouse. The study developed a wireless IoT sensor system based on authentic technology capacities, to integrate with the protected horticulture Management System. These system was used to evaluate the levels of the snow cover and wind through IoT devices. The existing greenhouse uses the warm water to clear snow or to change methods. This system will recover by changing the vinyl which is covered outside of the greenhouse. The points of the system is changing vinyl to spin pipe. It is contained extra vinyl. The effects of this system are minimized labor protected crops from natural disasters. For this purpose, the study first developed a wireless IoT sensor unit that integrates an MEMS device and wireless communication module. Also, the study developed an operating program that enables real-time response measurement. It will help operational and maintenance greenhouse as a result.

• The Journal of Information Systems
• /
• v.32 no.4
• /
• pp.211-227
• /
• 2023

Purpose In the contemporary landscape, marked by the enduring impact of COVID-19 and the recent disruptions stemming from the conflict in Ukraine, the purpose of this study is to navigate the era characterized by pervasive risk and uncertainty. Specifically, the study aims to dissect the impact of the COVID-19 outbreak on digital transformation, exploring the factors influencing this process and considering the multifaceted dynamics at play. The focus extends to the post-COVID-19 landscape, scrutinizing the implications and meanings of digital transformation both before and after the pandemic. Additionally, the study delves into future digital trends, with particular attention to climate and environmental issues, emphasizing corporate responsibilities in averting crises similar to COVID-19. The overarching goal is to provide a holistic perspective, shedding light on both positive and negative facets of digital transformation, and advocating for regulatory enhancements and legal frameworks conducive to a balanced and resilient digital future. Design/methodology/approach This study employs a comprehensive approach to analyze the impact of the COVID-19 outbreak on digital transformation. It considers various facets, such as smart devices reshaping daily routines, transformative changes in corporate ecosystems, and the adaptation of government institutions to the digital era within the broader context of the Fourth Industrial Revolution. The analysis extends to the post-COVID-19 landscape, examining the implications and meanings of digital transformation. Future digital trends, especially those related to climate and environmental issues, are prognosticated. The methodology involves a proactive exploration of challenges associated with digital transformation, aiming to advocate for regulatory enhancements and legal frameworks that contribute to a balanced and resilient digital future. Findings The findings of this study reveal that the digital economy has gained momentum, accelerated by the proliferation of non-face-to-face industries in response to social distancing imperatives during the COVID-19 pandemic. Digital transformation, both preceding and succeeding the onset of the pandemic, has precipitated noteworthy shifts in various aspects of daily life. However, challenges persist, and the study highlights factors that either bolster or hinder the transformative process. In the post-COVID-19 era, corporate responsibilities in averting crises, particularly those resembling the pandemic, take center stage. The study emphasizes the need for a holistic perspective, acknowledging both positive and negative facets of digital transformation. Additionally, it calls for proactive measures, including regulatory enhancements and legal frameworks, to ensure a balanced and resilient digital future.

• Journal of Industrial Convergence
• /
• v.22 no.4
• /
• pp.1-9
• /
• 2024

Smart factories represent production facilities where cutting-edge information and communication technologies are fused with manufacturing processes, reflecting rapid advancements and changes in the global manufacturing sector. They capitalize on the integration of robotics and automation, the Internet of Things (IoT), and the convergence of artificial intelligence technologies to maximize production efficiency in various manufacturing environments. However, the smart factory environment is prone to security threats and vulnerabilities due to various attack techniques. When security threats occur in smart factories, they can lead to financial losses, damage to corporate reputation, and even human casualties, necessitating an appropriate security response. Therefore, this paper proposes a security authentication mechanism for safe communication in the smart factory environment. The components of the proposed authentication mechanism include smart devices, an internal operation management system, an authentication system, and a cloud storage server. The smart device registration process, authentication procedure, and the detailed design of anomaly detection and update procedures were meticulously developed. And the safety of the proposed authentication mechanism was analyzed, and through performance analysis with existing authentication mechanisms, we confirmed an efficiency improvement of approximately 8%. Additionally, this paper presents directions for future research on lightweight protocols and security strategies for the application of the proposed technology, aiming to enhance security.