• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.185-185
• /
• 2022

상수도 관망의 운영 단계에서 비정상상황의 발생은 필연적으로 발생하며, 비정상상황 발생 시상수도 관망 내 설치된 제수 밸브의 차폐를 통해 해당 구역의 격리 후 복구를 진행한다. 일반적으로 제수밸브를 통해 격리될 수 있는 최소 구역은 세그먼트로 정의하고, 제수밸브 설치 시 세그먼트의 격리로 인한 상수도 관망의 피해를 줄일 수 있도록 위치를 선정한다. 제수 밸브를 통한 격리 시 상수도 관망의 흐름 경로와 유향, 유속의 변화와 같은 수리적 특성 변화가 불가피하다. 지난 '19년도에 발생했던 3건의 수질 사고가 수리적 특성 변화에서 기인했던 것을 고려할 때, 제수밸브 차폐로 상수도 관망의 부분 격리 시 발생 가능한 수리적 특성 변화에서도 수질 사고가 야기될 가능성이 있다. 기존 제수밸브 위치를 결정한 연구들을 보면, 대부분 제수밸브 위치에 따라 결정된 세그먼트의 격리 시 수압 저감을 고려하여, 격리 시에도 상수도 관망의 성능을 최대한 유지할 수 있도록 결정하는 것이 일반적이다. 다만, 앞서 언급한 것과 같이 격리 시 발생 가능한 수리적 특성 변화로, 수압 저감 외에도 예기치 못한 수질 사고의 발생 원인이 되기도 한다. 이에 따라 제수밸브의 최적위치를 결정할 때 수리적 특성 변화를 고려해야 예지치 못한 2차 피해를 줄일 수 있을 것이다. 이에 본 연구는 그래프이론을 활용하여 격리 전후 관로의 유향 변화를 최소화하도록 제수밸브 최적 위치 결정하는 방법론을 제안한다. 그래프이론은 망의 형태를 가지는 상수도 관망의 연결성을 정량화할 수 있으며, 본 연구에서는 수리학적 거리 인자를 적용하여 격리 시에도 각 수요절점이 최소 경로를 확보할 수 있도록 유도하였다. 해당 방법론은 가상 관망에 적용하여 수리학적 거리 인자에 따른 설계와 기존 상수도 관망 성능 극대화 설계 안을 비교하였다. 또한 수질 사고 위험도 인자를 정의하여 해당 인자에 따른 각 설계 안의 효과를 분석하였다. 본 연구는 향후 수질 사고를 고려한 밸브 시스템의 설계 및 운영에 활용할 수 있을 것으로 기대한다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.187-187
• /
• 2022

우리나라의 농촌 유역은 크게 1) 상류에 위치한 농업용 저수지, 2) 저수지 방류부, 3) 저수지 하류하천, 4) 하류 농업 지대로 구성된다. 이들 모두 유역의 홍수·침수와 연관되어 있으나 각각의 설계 빈도가 서로 달라 일시에 수용 가능한 수자원의 양이 상이하다. 예컨대 극한 강우가 발생한 경우 PMP를 고려하여 설계된 저수지에서는 유입 홍수량이 통제될 수 있으나 50-200년 빈도로 설계된 하류하천에서는 측면 유입량 때문에 홍수가 발생할 수 있다. 따라서 유역의 홍수 확률을 산출할 때에는 유역 구성지역별 홍수 확률을 산정한 후 종합적으로 고려할 필요가 있다. 특히 농촌유역의 경우 하류하천 및 농경지의 설계 빈도 기준이 도시에 비해 낮아 유역 구성요소 간 처리 가능한 수자원 양의 차이가 크다. 따라서 본 연구에서는 농촌 유역을 대상으로 연구를 진행하였다. 한편, 최근 기후변화로 인해 극한 강우 사상의 빈도가 잦아짐에 따라 유역 내 홍수의 발생이 증가하고 있다. 따라서 기후변화에 따른 미래 농촌 유역의 홍수 발생 여부 파악이 필수적이다. 이에 본 연구에서는 CMIP 6 (Coupled Model Intercomparison Project Phase 6)의 GCM (General Circulation Model) 기상산출물을 농촌 유역에 적용함으로써 미래 농촌 유역의 홍수 발생 여부를 확인하고자 하였다. 또한, CMIP 6의 GCM 산출 기상자료의 시간 단위는 24시간 혹은 3시간으로 시간적 해상도가 낮으므로 유역 홍수 모의를 위하여 GCM 산출물의 시간 분해를 수행하였다. 본 연구에서는 MRC (Multiplicative Random Cascade) 모형을 기후변화 시나리오 기상자료에 적용함으로써 강우 자료의 시간 분해를 수행하고, 시간 분해 결과물을 활용하여 농촌 유역의 미래 홍수 확률을 산정해보고자 하였다. 본 연구의 결과는 향후 농촌 유역의 홍수 확률 산정 기법에 관한 기초 자료로 활용될 수 있을 것으로 사료된다.

• Journal of Korea Water Resources Association
• /
• v.47 no.5
• /
• pp.483-490
• /
• 2014

The design procedures for a biological reactor and a secondary settling tank (SST) of an activated sludge system are based on the steady state design method (Ekama et al., 1986; WRC, 1984) and the 1-D flux theory design method (Ekama et al., 1997), respectively. This study combined both of the design procedures, to determine the optimum sludge concentration in the reactor and the best design with the lowest cost. The best design of the reactor volume and the SST diameter at the optimum sludge concentration were specified with varying wastewater and sludge characteristics, temperature, sludge retention time (SRT) and peak flow rate. The effects of the influent wastewater characteristics, such as substrate concentration and unbiodegradable particulate fraction, were found to be considerable, but the effect of unbiodegradable soluble fraction was to be negligible. The effects of sludge settling characteristics, were also significant. SRT, as an operating parameter, was found to be an important factor for determining the optimum sludge concentration. However, the effect of temperature was found to be small. Furthermore, for designing a large scale wastewater treatment plant, the number of reactors or SSTs could be estimated, by dividing the total reactor volume or SST area. The new combined design procedure, proposed in this research, will be able to allow engineers to provide the best design of an activated sludge system with the lowest cost.

• Water Engineering Research
• /
• v.1 no.2
• /
• pp.95-105
• /
• 2000

A method is presented which enables easily the computation of the suspended sediment discharge as the mean sediment concentration and mean flow velocity. This method has significant advantages over the traditional method, which principally depend on a set of measured concentration data. The method is based on both a new sediment concentration and mean sediment concentration equations which have been derived from the entropy concept used in statistical mechanics and information theory: (1) The sediment concentration distribution equations derived, are capable of describing the variation of the concentration in the vertical direction. (2) The mean concentration equation derived, is capable of calculating easily the mean concentration by using only one measured concentration in open channel. The present study mainly addresses the following two subjects : (1) new sediment concentration and mean sediment concentration equations are derived from the entropy concept : (2) An efficient and useful method of suspended sediment-discharge measurements is developed which can facilitate the estimation of suspended sediment-discharge in open channel. Flume and laboratory data are used to carry out the research task outlined above. An efficient method for determining the suspended sediment-discharge in the open channel has been developed. The method presented also is efficient and applicable in estimating the sediment transport in rivers and the sediment deposit in the reservoirs, and can drastically reduce the time and cost of sediment measurements.

• Journal of Family Resource Management and Policy Review
• /
• v.8 no.1
• /
• pp.79-100
• /
• 2004

This study attempted to examine the employment instability on consumer's use of credit as a financing medium. The purpose of this study was 1) to examine the effect of employment related factors on consumers' use of credit; 2) to compare the results between the two different economic situations. A conceptual framework was developed based on the permanent income hypothesis, family stress theory, and the previous empirical studies. Using data on working households ih the 1992 and 1998 Survey of Consumer Finances (SCF), double-hurdle analyses were conducted. The results suggested that employment related factors that measured employment stability were significantly related to the likelihood of having an outstanding balance on their credit account but were not the influential factors in determining the amount of the outstanding balance. Among other factors, resources factor played the most significant role in determining both the likelihood of having an outstanding balance and the amount of the balance. Although the 1992 and 1998 data represent economic downturn and economic prosperous period, the effects of the factors including employment instability factors were similar between the two periods. This imply that employment instability has increased even in the economic prosperous period. From the findings, several implications for policy makers, credit industry, and financial educators were suggested.

• Steel and Composite Structures
• /
• v.27 no.1
• /
• pp.95-108
• /
• 2018

A new composite reinforced method, namely self-compacting concrete filled circular CFRP-steel jacketing, was proposed in this paper. Experimental tests on eight RC square short columns reinforced with the new composite reinforced method and four RC square short columns reinforced with CFS jackets were conducted to investigate their eccentrically compressive behaviour. Nine reinforced columns were subjected to eccentrically compressive loading, while three reinforced columns were subjected to axial compressive loading as reference. The parameters investigated herein were the eccentricity of the compressive loading and the layer of CFRP. Subsequently, the failure mode, ultimate load, deformation and strain of these reinforced columns were discussed. Their failure modes included the excessive bending deformation, serious buckling of steel jackets, crush of concrete and fracture of CFRP. Moreover, these reinforced columns exhibited a ductile failure globally. Both the eccentricity of the compressive loading and the layer of CFRP had a significant effect on the eccentrically compressive behaviour of reinforced columns. Finally, formulae for the evaluation of the ultimate load of reinforced columns were proposed. The theoretical formulae based on the ultimate equilibrium theory provided an effective, acceptable and safe method for designers to calculate the ultimate load of reinforced columns under eccentrically compressive loading.

• The Korean Journal of Food And Nutrition
• /
• v.22 no.4
• /
• pp.687-695
• /
• 2009

The present study attempted to offer more insights into the foreign consumers' consumption decision structure of Korean restaurants located in foreign countries. A survey was designed based on the means-end chain theory, using the laddering interview technique. The qualitative data obtained from 10 Americans, 10 Japanese, and 10 Chinese were content analyzed and resulted in categories such as 'new experience', 'interest in Korea', 'recommendation', 'good food', 'easy to access', 'service', 'dining environment', and 'price' as perceived attributes of choice. The hierarchical value maps linking attributes, psychological consequences, and terminal values were presented. The most frequent consequences were 'experience new culture', 'be exposed to new experience', and 'learn more about Korea' which were related to 'happiness', 'pleasure', 'good relationship', 'desire fulfillment', and 'self-satisfaction' as personal values. Laddering interviews, which required laborious analysis, provided important information on the relationship between perceived attributes and the reasons for choosing Korean restaurants.

• Journal of Korean Public Health Nursing
• /
• v.30 no.2
• /
• pp.288-299
• /
• 2016

Purpose: This study was to identify the current issues and challenges of the nursing education program in Cambodia and to suggest recommendations to improve it. Methods: The World Health Organization Global Standards for the Initial Education of Nurses and Midwives were used as the analytic framework. Data were collected through a critical, constructive analysis of the literature, as well as observation with stakeholders in the area. Results: Cambodia experienced a shortage of nurses based on the demands of nurses. Moreover, the lack of institutional capacity, out dated and rudimentary nursing curriculum, under qualified nursing faculty, overcrowded classrooms, and lack of fundamental education materials and equipment for nursing education hampered the maintenance and improvement of the quality of pre-service nursing education in Cambodia. Conclusion: Strengthening the nursing educational resources and infrastructures, along with proper retention and enhancement of the faculty's capacity, clinical mentorship, and sustainable management of the nursing curriculum were recommended. Integrating the nursing theory and process into clinical practice and using strategic partnerships, would improve the quality and quantity of nursing education in Cambodia. There needs to be a synergistic relationship between nursing education and training relevant to the nursing care to meet the needs of the Cambodian population.

• Journal of KIISE:Computer Systems and Theory
• /
• v.34 no.9
• /
• pp.385-394
• /
• 2007

In this paper, we present a workflow system which manages efficiently operations in workflow form. The workflow of this system is made up of concepts of meta-services for increasing reusability. Thus users can execute the workflow by calling their services. Also, GUI workflow editor is developed with the workflow system which provides users with convenience. Furthermore the workflow model is divided into 3-layers such as service, flow, and task layer for reusability and scalability of workflow. Therefore, this middleware can use grid resources effectively and offer convenience to users.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.4
• /
• pp.223-230
• /
• 2006

The method of implementing a modular multiplier for Montgomery multiplication by using an adder depends on a selected adder. When using a CPA, there is a carry propagation problem. When using a CSA, it needs an additional calculation for a final result. The Multiplier using a Multi-precision CSA can solve both problems simultaneously by combining a CSA and a CPA. This paper presents an improved MP-CSA which reduces hardware resources and operation time by changing a MP-CSA's carry chain structure. Consequently, the proposed multiplier is more suitable for the module of long bit multiplication and exponentiation using a modular multiplier repeatedly.