Steel and Composite Structures

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Eccentrically compressive behaviour of RC square short columns reinforced with a new composite method

  • Zhang, Fan (School of Resources and Civil Engineering, Northeastern University) ;
  • Lu, Yiyan (School of Civil Engineering, Wuhan University) ;
  • Li, Shan (School of Civil Engineering, Wuhan University) ;
  • Zhang, Wenlong (School of Civil Engineering, Wuhan University)
  • Received : 2017.10.03
  • Accepted : 2018.02.03
  • Published : 2018.04.10
⟨ Previous Next ⟩

Abstract

A new composite reinforced method, namely self-compacting concrete filled circular CFRP-steel jacketing, was proposed in this paper. Experimental tests on eight RC square short columns reinforced with the new composite reinforced method and four RC square short columns reinforced with CFS jackets were conducted to investigate their eccentrically compressive behaviour. Nine reinforced columns were subjected to eccentrically compressive loading, while three reinforced columns were subjected to axial compressive loading as reference. The parameters investigated herein were the eccentricity of the compressive loading and the layer of CFRP. Subsequently, the failure mode, ultimate load, deformation and strain of these reinforced columns were discussed. Their failure modes included the excessive bending deformation, serious buckling of steel jackets, crush of concrete and fracture of CFRP. Moreover, these reinforced columns exhibited a ductile failure globally. Both the eccentricity of the compressive loading and the layer of CFRP had a significant effect on the eccentrically compressive behaviour of reinforced columns. Finally, formulae for the evaluation of the ultimate load of reinforced columns were proposed. The theoretical formulae based on the ultimate equilibrium theory provided an effective, acceptable and safe method for designers to calculate the ultimate load of reinforced columns under eccentrically compressive loading.

Keywords

Acknowledgement

Supported by : National Natural Science Foundation of China

References

  1. Achillopoulou, D.V., Kiziridou, A.N., Papachatzakis, G.A. and Karabinis, A.I. (2016), "Investigation of interface response of reinforced concrete columns retrofitted with composites", Steel Compos. Struct., Int. J., 22(6), 1337-1358. https://doi.org/10.12989/scs.2016.22.6.1337
  2. Cai, S.H. (2003). Modern steel tube confined concrete structures, China Communications Press, Beijing, China.
  3. Dubey, R. and Kumar, P. (2016), "Experimental study of the effectiveness of retrofitting RC cylindrical columns using selfcompacting concrete jackets", Constr. Build. Mater., 124, 104-117. https://doi.org/10.1016/j.conbuildmat.2016.07.079
  4. Elbakry, H.M.F. and Tarabia, A.M. (2016), "Factors affecting bond strength of RC column jackets", Alexandria Eng. J., 55(1), 57-67. https://doi.org/10.1016/j.aej.2016.01.014
  5. GB/T 228-2002 (2002), Metallic materials-tensile testing at ambient temperature; General administration of quality supervision, inspection and quarantine of the people's republic of China. [In Chinese]
  6. GB/T 3354-1999 (1999), Test method for tensile properties of orientation fiber reinforced polymer matrix composite materials; General administration of quality supervision, inspection and quarantine of the people's republic of China, Standardization administration of the people's republic of China. [In Chinese]
  7. GB 50010-2015 (2015), Code for design of concrete structures, General administration of quality supervision, inspection and quarantine of the people's republic of China, Standardization administration of the people's republic of China. [In Chinese]
  8. GB/T 50081-2002 (2002), Standard for test mehtod of mechanical properties on ordinary concrete, Ministry of housing and urbanrural development of the people's republic of China, General administration of quality supervision, inspection and quarantine of the people's republic of China. [In Chinese]
  9. GB 50936-2014 (2014), Technical code for concrete filled steel tubular structures, Ministry of housing and urban-rural development of the people's republic of China, General administration of quality supervision, inspection and quarantine of the people's republic of China. [In Chinese]
  10. Gu, W., Li, H.N. and Zhang, N.M. (2011), "Constitutive relation of concrete of concrete-filled CFRP-steel tubular short columns with axial compression", J. Dalian Univ. Technol., 51(4), 545-548. [In Chinese]
  11. He, A., Cai, J., Chen, Q.J., Liu, X. and Xu, J. (2016), "Behaviour of steel-jacket retrofitted RC columns with preload effects", Thin-Wall. Struct., 109, 25-39. https://doi.org/10.1016/j.tws.2016.09.013
  12. He, A., Cai, J., Chen, Q.J., Liu, X., Xue, H. and Yu, C. (2017), "Axial compressive behaviour of steel-jacket retrofitted RC columns with recycled aggregate concrete", Constr. Build. Mater., 141, 501-516. https://doi.org/10.1016/j.conbuildmat.2017.03.013
  13. Hua, W., Wang, H.J. and Hasegawa, A. (2014), "Experimental study on reinforced concrete filled circular steel tubular columns", Steel Compos. Struct., Int. J., 17(4), 517-553. https://doi.org/10.12989/scs.2014.17.4.517
  14. Huang, Y.J., Xiao, J.Z. and Shen, L. (2016), "Damage assessment for seismic response of recycled concrete filled steel tube columns", Earthq. Eng. Eng. Vib., 15(3), 607-616. https://doi.org/10.1007/s11803-016-0347-8
  15. Jiang, S., Guo, X., Xiong, Z., Cai, Y. and Zhu, S. (2017), "Experimental studies on behaviour of tubular T-joints reinforced with grouted sleeve", Steel Compos. Struct., Int. J., 23(5), 585-596. https://doi.org/10.12989/scs.2017.23.5.585
  16. Juntanalikit, P., Jirawattanasomkul, T. and Pimanmas, A. (2016), "Experimental and numerical study of strengthening non-ductile RC columns with and without lap splice by Carbon Fiber Reinforced Polymer (CFRP) jacketing", Eng. Struct., 125, 400-418. https://doi.org/10.1016/j.engstruct.2016.07.019
  17. Minafo, G. (2015), "A practical approach for the strength evaluation of RC columns reinforced with RC jackets", Eng. Struct., 85, 162-169. https://doi.org/10.1016/j.engstruct.2014.12.025
  18. Minafo, G. and Papia, M. (2016), "Concrete softening effects on the axial capacity of RC jacketed circular columns", Eng. Struct., 128, 215-224. https://doi.org/10.1016/j.engstruct.2016.09.043
  19. Minafo, G., Trapani, F.D. and Amato, G. (2016), "Strength and ductility of RC jacketed columns: A simplified analytical method", Eng. Struct., 122, 184-195. https://doi.org/10.1016/j.engstruct.2016.05.013
  20. Quiertant, M. and Clement, J.L. (2011), "Behavior of RC columns strengthened with different CFRP systems under eccentric loading", Constr. Build. Mater., 25(2), 452-460. https://doi.org/10.1016/j.conbuildmat.2010.07.034
  21. Rahai, A. and Akbarpour, H. (2014), "Experimental investigation on rectangular RC columns strengthened with CFRP composites under axial load and biaxial bending", Compos. Struct., 108, 538-546. https://doi.org/10.1016/j.compstruct.2013.09.015
  22. Sezen, H. and Miller, E.A. (2011), "Experimental evaluation of axial behavior of strengthened circular reinforced-concrete columns", J. Bridge Eng., ASCE, 16(2), 238-247. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000143
  23. Shin, J., Scott, D.W., Stewart, L.K., Yang, C.S., Wright, T.R. and DesRoches, R. (2016), "Dynamic response of a full-scale reinforced concrete building frame retrofitted with FRP column jackets", Eng. Struct., 125, 244-253. https://doi.org/10.1016/j.engstruct.2016.07.016
  24. Vandoros, K G. and Dritsos, S.E. (2008), "Concrete jacket construction detail effectiveness when strengthening RC columns", Constr. Build. Mater., 22(3), 264-276. https://doi.org/10.1016/j.conbuildmat.2006.08.019
  25. Wang, Y.F., Ma, Y.S. and Wu, H.L. (2011), "Reinforced highstrength concrete square columns confined by aramid FRP jackets. Part I: Experimental Study", Steel Compos. Struct., Int. J., 11(6), 455-468. https://doi.org/10.12989/scs.2011.11.6.455
  26. Wang, D., Wang, Z., Smith, S.T. and Yu, T. (2017), "Seismic performance of CFRP-confined circular high-strength concrete columns with high axial compression ratio", Constr. Build. Mater., 134, 91-103. https://doi.org/10.1016/j.conbuildmat.2016.12.108
  27. Wu, H.L., Wang, Y. F. and Ma, Y.S. (2011), "Reinforced highstrength concrete square columns confined by aramid FRP jackets. Part II: Modeling", Steel Compos. Struct., Int. J., 11(4), 325-340.