• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.416-419
• /
• 1995

An analysis of a new load resonant inverter considering stray inductance is given. There are several different types for load resonant inverters. They can offer zero turn-on as well as zero turn-off switching losses, yielding high efficiency at high power and high frequencies. However, they didn't consider the influences of stray inductance. In conventional topology using lossless snubber capacitor, stray inductances result in very high frequency resonant current. Especially, these influences can be problematic in high power system such as induction heating system with large current of some 10A associated with it. These currents increase EMI problem, give harmful effects in gate driver's operation and increase loss of dc-link capacitor as well as snubber capacitor. Therefore, the effect of stray inductances should be treated and reduced. This paper presents a new load resonant inverter topology, which can reduce the effect of stray inductances.

• Journal of Power Electronics
• /
• 제16권1호
• /
• pp.18-26
• /
• 2016

This paper proposes a compensation algorithm for reducing a specific ripple component on synchronous reference frame phase locked loop (SRF-PLL) in grid-tied single-phase inverters. In general, SRF-PLL, which is based on all-pass filter to generate virtual voltage, is widely used to estimate the grid phase angle in a single-phase system. In reality, the estimated grid phase angle might be distorted because the phase difference between actual and virtual voltages is not 90 degrees. That is, the phase error is caused by the difference between cut-off frequency of all-pass filter and grid frequency under grid frequency variation. Therefore, the effects on phase angle and output current attributed to the phase error are mathematically analyzed in this paper. In addition, the proportional resonant (PR) controller is adapted to reduce the effects of phase error. The validity of the proposed algorithm is verified through several simulations and experiments.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.195-198
• /
• 1999

Complex resonant frequency of on a uniaxial substrate with a superstrate-loaded microstrip structure is investigate. The study is performed by Galerkin’s method. The numerical convergence using sinusoidal basis function. Numerical results for the effects of anisotropy in the substrate, superstrate permittivity, in the complex resonant frequency of the rectangular microstrip structure are also presented. Half-power bandwidth are increased due to the positive uniaxial an isotropy and superstrate.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2001년도 제12회 정기총회 및 01년도 동계학술발표회
• /
• pp.52-53
• /
• 2001

지속적인 발전을 거듭해 온 초고속 분광학으로 인해, 반도체(semiconductor) 또는 반도체 양자 구조(quantum structure)와 같은 물질에서 결맞는(coherent) 시간 내에 일어나는 다양하고 흥미로운 광학적 특성들의 관찰이 가능해졌다 대부분의 펨토초(femtosecond) 광학 실험이 공명여기(resonant excitation)에 국한되어왔던 반면 최근엔 비공명(off-resonant) 흡수에 의한 가상 여기(virtual excitation)에 대한 관심이 증대되고 있다[1, 2]. (중략)

• 한국지반공학회지:지반
• /
• 제6권1호
• /
• pp.7-14
• /
• 1990

주동단에 반력스프링이 부착된 공진주(spring-top resonant column) 시험기 주동단 불완전 고정의 영향을 연구하기 위해 2자유도 모델을 제안하였다. SYMPHONY스프레드쉿트를 이용하여 무차원주파수, F를 구할 수 있도록 전산화하였으며 이로부터 탄성계수를 구할 수 있다. F에 대한 반력 질량의 영향은 반력질량 및 시료의 질량 및 주파수에 관계되는 계수, T<20인 경우에 는 무시할 수 없음을 밝혔다. 시험기 및 시료의 질량과 주파수에 관계되는 계수, Tci가 증가함에 따라 F의 영향 역시 증가하였으나 T도 20인 경우 그 영향은 적었다. 주동단 고정을 위해서는 T, 이 20이상 되어야 함을 제안하였으며 이 경우 SDOF으로 취급할 수 있다. 시료와 시험기의 감쇠비는 F에 크게 영향을 미치지 않음도 밝혔다.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2002년도 학술발표회 발표논문집
• /
• pp.349-352
• /
• 2002

In this paper, dynamic properties of fiber reinforced soils were investigated at shearing strains between $10^{-4}%\;and\;10^{-1}%$ using resonant column test. Resonant column test has been widely used as a primary laboratory testing technique in investigating dynamic soil properties expressed in term of shear modulus and material damping. At strains above elastic threshold, the variations of shear modulus(G) and damping ratio(D) were investigated. Based on test results, the small strain shear modulus($G_{max}$) and damping ratio($D_{min}$) were determined and the effects of confinement on $G_{max}$ and $D_{min}$ were characterized.

• 한국초전도ㆍ저온공학회논문지
• /
• 제4권1호
• /
• pp.129-134
• /
• 2002

In this study, the experimental open-tube and close-tube thermoacoustic apparatuses were constructed. In order to determine the optimum length of resonant tube, frequency and the optimum length of stack, the resonant characteristics of thermoacoustic apparatuses were investigated, The length of resonant tube varies from 400mm to 850 mm. The experimental frequency varies from 100 Hz to 1000 Hz. In case of first harmonic, the maximum temperature difference of the open-tube thermoacoustic apparatus is 41$^{\circ}C$)resonator length: 500 mm), and the maximum temperature difference of the close-tube thermoacoustic apparatus is 42$^{\circ}C$ (resonator length : 850 mm).

• Journal of Power Electronics
• /
• 제14권6호
• /
• pp.1322-1333
• /
• 2014

To track the sinusoidal current under stationary frame and suppress the effects of low-order grid harmonics, the multi-resonant quasi-proportional plus resonant (PR) controller has been extensively used for digitally controlled LCL-type pulse-width modulation (PWM) converters with capacitor-current-feedback active damping. However, designing the controller is difficult because of its high order and large number of parameters. Moreover, the computation and PWM delays of the digitally controlled system significantly affect damping performance. In this study, the delay effect is analyzed by using the Nyquist diagrams and the system stability constraint condition can be obtained based on the Nyquist stability criterion. Moreover, impact analysis of the control parameters on the current loop performance, that is, steady-state error and stability margin, identifies that different control parameters play different decisive roles in current loop performance. Based on the analysis, a simplified controller design method based on the system specifications is proposed. Following the method, two design examples are given, and the experimental results verify the practicability and feasibility of the proposed design method.

• 한국인터넷방송통신학회논문지
• /
• 제22권5호
• /
• pp.123-128
• /
• 2022

정확한 모드전송선로 이론 (MTLT)을 적용하여 원추형 광 입사에서 공진 회절격자의 특성을 조사하였다. 원추형 구성에서 공진 회절과 관련된 모드 벡터가 전형적이 구조의 회절격자와 관련된 것보다 입사각에 따라 작게 변한다는 것을 보여주었다. 더욱이, 소멸하는 회절파가 공진 효과를 담당하는 누설 모드를 구동함에 따라, 원추형 장착은 기존 회절격자보다 더 큰 각도 허용 오차를 회절격자에 부여함을 보였다. 이에 기초하여, 수치 계산을 통하여 원추형 입사에서 발견된 스펙트럼을 사용하여, 원추형 및 클래식 구성에서 공진 회절격자의 각도-스펙트럼과 파장-스펙트럼 성능을 정량화하였다. 이러한 결과는 효율적이고 물리적으로 희소한 공진 회절격자를 요구하는 다양한 응용 분야에서 유용할 것이다.

• 한국해양공학회지
• /
• 제29권1호
• /
• pp.1-8
• /
• 2015

An analytical model of liquid sloshing is developed to consider the energy-loss effect through a partially submerged porous baffle in a horizontally oscillating rectangular tank. The nonlinear boundary condition at the porous baffle is derived to accurately capture both the added inertia effects and the energy-loss effects from an equivalent non-linear drag law. Using the eigenfunction expansion method, the horizontal hydrodynamic force (added mass, damping coefficient) on both the wall and baffle induced by the fluid motion is assessed for various combinations of porosity, submergence depth, and the tank's motion amplitude. It is found that a negative value for the added mass and a sharp peak in the damping curve occur near the resonant frequencies. In particular, the hydrodynamic force and free surface amplitude can be largely reduced by installing the proper porous baffle in a tank. The optimal porosity of a porous baffle is near P=0.1.