• The Journal of the Korea Contents Association
• /
• v.17 no.9
• /
• pp.523-535
• /
• 2017

Despite consumers' increasing awareness and interests in innovative wearable devices, the sales growth has been stagnant. To analyze this phenomenon, we investigate consumer preferences for various innovative features embedded in wearable devices. Conducting conjoint analysis on smartwatches, we empirically show that the curse of innovation can occur when the consumer's expected utility from the smartwatch falls short of his/her psychological cost associated with behavior change from smartwatch usage. Therefore, our findings provide managerial implications on the R&D strategy for new technologies and more importantly on the marketing strategy easing consumers' resistance to highly innovative products.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05a
• /
• pp.5-21
• /
• 2006

Traditional standards and specifications for concrete have largely been prescriptive, (or prescription-based), and can sometimes hinder innovation and in particular the use of more environmentally friendly concretes by requiring minimum cement contents and SCM replacement levels. In December 2004, the Canadian CSA A23.1-04 standard was issued which made provisions (a) for high-volume SCM concretes, (b) added new performance requirements for concrete, and (c) clearly outlined the requirements and responsibilities for use in performance-based concrete specifications. Also, in December 2003, the CSA A3000 Hydraulic Cement standard was revised. It (a) reclassified the types of cements based on performance requirements, with both Portland and blended cements meeting the same physical requirements, (b) allows the use of performance testing for assessing sulphate resistance of cementitious materials combinations, (c) includes an Annex D, which allows performance testing of new or non-traditional supplementary cementing materials. From a review of international concrete standards, it was found that one of the main concerns with performance specifications has been the lack of tests, or lack of confidence in existing tests, for judging all relevant performance concerns. Of currently used or available test methods for both fresh, hardened physical, and durability properties, it was found that although there may be no ideal testing solutions, there are a number of practical and useful tests available. Some of these were adopted in CSA A23.1-04, and it is likely that new performance tests will be added in future revisions. Other concerns with performance standards are the different perspectives on the point of testing for performance. Some concrete suppliers may prefer processes for both pre-qualifying the plant, and specific mixtures, followed only with testing only 'end-of-chute' fresh properties on-site. However, owners want to know the in-place performance of the concrete, especially with high-volume SCM concretes where placing and curing are important. Also, the contractor must be aware of, and share the responsibility for handling, constructability, curing, and scheduling issues that influence the in-place concrete properties.

• Current Photovoltaic Research
• /
• v.12 no.2
• /
• pp.37-40
• /
• 2024

One of the current innovation trends in the solar industry is the increase in the size of silicon wafers. As the wafer size increases, the series resistance of the module rises, highlighting the need for research on methods for cutting and bonding solar cells. Among these, the Infrared (IR) laser scribing technique has been extensively researched. However, there is still insufficient optimization research regarding the thermal damage caused by lasers on the Transparent Conductive Oxide (TCO) layer of Heterojunction (HJT) solar cells. Therefore, in this study, we systematically varied conditions such as IR laser scribing speed, frequency, power, and the number of scribes to investigate their impact on the performance of cut cells under each condition. Additionally, we conducted a comparative analysis of thermal damage effects on the TCO layer based on varying scribing depths.

• Journal of Engineering Education Research
• /
• v.22 no.6
• /
• pp.51-63
• /
• 2019

This study aims to present concept of "gong" which was shared by traditional East Asian societies (Korea, China and Japan) and to identify how it has been developed through their respective process of modernization and industrialization. Despite the territorial proximity of the three countries, their industrial and technological development followed different patterns, and the notion of engineering from the Occident was also accepted and reconstructed with a certain difference in each country. Japan had developed its own concept of engineering as part of industrialization in Western style and in the context of establishment of an imperialist nation. What was important for Japan was how engineering could contribute to the national development of technology and industry, and to the development of Imperial Japan. For China, which attached importance to resistance to Western civilizations and to strengthening the competitiveness for and which needed to resolve domestic political conflicts, engineering constituted more than a simple issue on technological and industrial dimension; it was also associated with obtaining ethical and political legitimacy which would allow the nation to gain support from the working and peasant classes. Though belated, Korean attempted to build an independent modern state, yet experienced a considerable nuisance from the invasion of Japan and the protracted colonial period. Engineering of Korea had to take a long time before emerging from backwardness especially because of Japanese policies which tended to restrict technological development and avoid fostering qualified engineers in the colony. Therefore, engineering in Korea started to contribute to the nation's development and the improvement of technological competitiveness only after it was combined with modern higher education after liberation, under the name of engineering science (工學, gong-hak). This study argues that our recognition of what engineering was for and who engineers were in East Asia will allow us to evaluate current status of engineering education and provide us with significant insight which will be useful when we imagine the future society. Identity of engineering in Korea, China, and Japan has been developed along with historical contexts such as clash of civilizations, wars, recovery of sovereignty and obtaining of national competitiveness; now, what will be combined with engineering in the next generation? This question will lead and motivate engineering students to think and imagine about what future engineering should be and how they respond to it.

• Journal of the Microelectronics and Packaging Society
• /
• v.29 no.3
• /
• pp.49-53
• /
• 2022

Ultra-thin glass (UTG) has been widely used in foldable display as a cover window for the protection of display and has a great potential for rollable display and various flexible electronics. The foldable display is under impact loading by bending and touch pen and exposed to other external impact loads such as drop while people are using it. These external impact loads can cause cracks or fracture to UTG because it is very thin under 100 ㎛ as well as brittle. Cracking and fracture lead to severe reliability problems for foldable smartphone. Thus, this study constructs finite element analysis (FEA) model for the pen drop test which can measure the impact resistance of UTG and conducts mechanical modeling to improve the reliability of UTG under impact loading. When a protective layer is placed to an upper layer or lower layer of UTG layer, stress mechanism which is applied to the UTG layer by pen drop is analyzed and an optimized structure is suggested for reliability improvement of UTG layer. Furthermore, maximum principal stress values applied at the UTG layer are analyzed according to pen drop height to obtain maximum pen drop height based on the strength of UTG.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.5
• /
• pp.511-521
• /
• 2015

The thermal bridge occurring in a building influences its thermal performance and durability. The domestic typical multi-unit residential buildings suffer thermal losses resulting from thermal bridges of the balcony slab. To minimize the thermal loss between inside and outside of the balcony slab, thermal bridge breaker(TBB) systems have been developed and applied in building construction. Although thermal bridge breaker systems for reinforced concrete(RC) wall-slab joints can improve the thermal performance of a building, it is necessary to verify the structural performance of TBB systems whether they provide proper resistance for cyclic loading. In order to investigate the structural characteristics of TBB systems embedded in RC slabs, cyclic tests of wall-slab joints were performed by applying two reversed cycles at each up to 30 cycles. The test results show that the RC slabs embedding TBBS systems can present excellent structural performance and the maximum moment capacity, energy dissipation capacity and ductility of TBBs systems are enhanced compared to those of the typical RC slabs.

• Human Ecology Research
• /
• v.61 no.4
• /
• pp.673-686
• /
• 2023

The purpose of this study was to identify home economics (HE) teachers' concerns about and perceptions of HE education using the latest technologies in the era of the 4th Industrial Revolution and to reveal whether they differ according to teachers' general background variables. The questionnaire survey method to measure HE teachers' concerns and perceptions of HE education using the latest technologies in the era of the 4th Industrial Revolution was conducted online using the Google Questionnaire from which 150 responses were received. The main results were as follows. Firstly, HE teachers scored an average of 3.46 out of 5 for the latest technology. Among these interests in the latest technology, interest in "augmented reality and virtual reality technologies" scored the highest at an average of 3.80, while interest in "neural network machine learning" (2.78) was low. HE teacher's concerns about HE education using the latest technologies in the era of the 4th Industrial Revolution were high, with an average score of 4.40. Among these concerns for the latest technology, "concern about the results of HE education using the latest technology" scored the highest at 4.53. HE teachers' anxiety about the latest teaching technology in the era of the 4th Industrial Revolution was moderate, averaging 3.05. The highest form of anxiety was "anxiety about the impact on the job" (4.03) and the lowest was fear of "the disappearance of the teacher's job" (2.50). HE teachers' innovation resistance to the latest teaching technology was low at 2.18. Expectations of the latest technology in HE classes in the era of the 4th Industrial Revolution averaged 3.85, slightly higher than the middle of 3.

• Journal of Gifted/Talented Education
• /
• v.26 no.2
• /
• pp.235-255
• /
• 2016

This study examined whether there were differences in stakeholders' concerns regarding consulting in gifted education institutes. A total of 122 stakeholders in gifted and talented education responded to SoCQ(the Stage of Concerns Questionnaire, Hall & Hord, 2011). The SoCQ responses of these stakeholders to consulting for gifted education institutes were converted into relative intensities and SoCQ profiles, which were analyzed by the affiliated areas of institute, teaching years in gifted education, continuities of affairs in gifted education, and approaches to teacher training for gifted education with using t-test and one-way analysis of variance. Results indicated that stakeholders generally showed the highest concern for stage 1(information) and the lowest concerns for stage 4(consequence), which were the initial stage of change and innovation in consulting for gifted education institutes. In the meanwhile, skakeholders having training program for professionals showed the more concern for stage 6(refocusing), which was a kind of resistance for the present consulting for gifted education institutes. On the based on these results, this study suggested ways(or methods) for settlement and the diffusion of successful gifted education consulting.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.237-245
• /
• 2020

Tropicália, which marked the beginning of Brazilian Popular Music (MPB), is a musical genre that originated in the Brazilian cultural movement and this arose in the late 1960s. The musicians who participated in this cultural movement delivered radical innovation by embracing the international music trend of the 60s, such as the Beatles phenomenon and the experimental and creative music of the electronic age. The music derived from this era incorporated the cannibalism of the Brazilian modernism cultural movement in the 1920s, and it presented a cultural consilience while maintaining the traditional Brazilian culture. In particular, the convergence of Tropicália with rock was especially prominent. As rock grew into the culture of resistance in both Britain and the United States, the convergent characteristic of Tropicália reflected the critical sociocultural view toward Brazil at that time. This paper focuses on the element of fusion of traditional Brazilian music and the rock music present in Tropicália. To present a case study, this paper selected music pieces by Caetano Veloso, the essential pillar of Tropicália, and examined each element through specific music analysis. This study aims to establish an academic foundation for third-world music and contributes to the development and creation of fusion music.

• Korean Journal of Clinical Laboratory Science
• /
• v.51 no.2
• /
• pp.221-234
• /
• 2019

Cancer is genetically, metabolically and infectiously induced life threatening disorder showing aggressive growing pattern with invasive tendency. In order to prevent this global menace from jeopardizing human life, enormous studies on carcinogenesis and treatment for chemotherapy resistance have been intensively researched. Hinokitiol (${\beta}$-thujaplicin) extracted from heart wood of cupressaceous is a well-known bioactive compound demonstrating anti-inflammation, anti-bacteria and anti-cancer effects on several cancer types via apoptosis and autophagy. This study proposed that hinokitiol activates transcription factor EB (TFEB) nuclear translocation for autophagy and lysosomal biogenesis regardless of nutrient condition in cancer cells. Mitophagy and ${\beta}$-catenin translocation into the nucleus under treatment of hinokitiol on non-small cell lung cancer (NSCLC) cells and HeLa cells were investigated. Hinokitiol exerted cytotoxicity on HeLa and HCC827 cells; moreover, artificially induced autophagy by overexpression of TFEB granted imperfect sustainability onto HeLa cells. Taken together, hinokitiol is the prominent autophagy inducer and activator of TFEB nuclear translocation. Alternative cancer therapy via autophagy is pros and cons since the autophagy in cancer cells is related to prevention and survival mechanism depending on nutrition. To avoid paradox of autophagy in cancer therapy, fine-tuned regulation and application of hinokitiol in due course for successful suppressing cancer cells are recommended.