• Journal of Sensor Science and Technology
• /
• v.24 no.3
• /
• pp.155-158
• /
• 2015

In this paper, in-situ heat cooling with temperature monitoring is reported to solve thermal issues in electric vehicle (EV) batteries. The device consists of a thick graphene cooler on top of the substrate and a platinum-based resistive temperature sensor with an embedded heater above the graphene. The graphene layer is synthesized by using chemical vapor deposition directly on the Ni layer above the Si substrate. The proposed thick graphene heat cooler does not use transfer technology, which involves many process steps and does not provide a high yield. This method also reduces the mechanical damage of the graphene and uses only one photomask. Using this structure, temperature detection and cooling are conducted simultaneously using one device. The temperature coefficient of resistance (TCR) of a $1{\times}1mm^2$ temperature sensor on 1-$\grave{i}m$-thick graphene is $1.573{\times}10^3ppm/^{\circ}C$. The heat source cools down $7.3^{\circ}C$ from $54.4^{\circ}C$ to $47.1^{\circ}C$.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.11
• /
• pp.1669-1674
• /
• 2017

In this study, We have discussed the development of a diagnostic device to detect and prevent electrical fire due to the arc caused by contact failure and partial disconnection at the connection part of the three-phase electric heater wiring used in the industrial field. The arc caused by contact failure and partial disconnection at the connection part of the electric heater shows a change in the current effective value. Therefore, it is possible to determine whether there exists a defect by analyzing the current unbalance factor and the number of current fluctuations with the diagnostic apparatus. The three-phase unbalanced heater is considered to be capable of determining defects through periodic measurement and trend analysis of the current unbalance factor. It is also expected that this device can be used not only for electric heaters but also for detection of defects in wiring and connections of electrical equipment having a characteristic of constant load current.

• Journal of Korean Society for Atmospheric Environment
• /
• v.20 no.E2
• /
• pp.69-75
• /
• 2004

In this study, thin film gas sensor based on tin oxide was fabricated to examine its characteristics. Target gas is acetonitrile ($CH_3$CN) which is a blood simulant for the chemical warfare agent. Sensing materials are SnO$_2$ SnO$_2$/Pt, and Sn/Pt with thickness from 1000 to 3000 $\AA$. The sensor consists of a sensing electrode with inter-digit (IDT) type in front side and a heater in rear side. Resistance changes of sensing materials are monitored on real time basis using a data acquisition board with a 12-bit analog to digital converter. Sensitivities are measured at different operating temperatures also with different gas concentrations and film thickness. The high sensitivity is obtained for Sn (3000 $\AA$)/Pt (30 $\AA$) at 30$0^{\circ}C$ for 3 ppm. Response and recovery times were about 40 and 160 s, respectively. Repetition measurements showed very good results with $\pm$3% in full scale range.

• Korean Journal of Veterinary Service
• /
• v.37 no.1
• /
• pp.35-43
• /
• 2014

Salmonellosis has caused heavy losses in swine industry and implications for public health. Recently, the urgent problem of antibiotic resistance due to multidrug-resistant Salmonella spp. has been on the rise. The use of host-specific bateriophages as a biocontrol is one possible alternative. In this study, clinical signs, growth performance, quantification and detection of antigen, histopathological changes of gastrointestinal tracts were analyzed comparatively in weaned piglets according to administration of bacteriophages and challenge with Salmonella (S.) Typhimurium. Piglets challenged with S. Typhimurium after administered with bacteriophages showed reduced clinical signs, higher growth performance, lower bacterial shedding, lower quantificational value of antigens in intestines, higher V/C ratio and higher the number of goblet cells in intestines than piglets administered without bacteriophage and challenged with S. Typhimurium. These results indicate that feeding contained with bacteriophages has effect to prevent infection of S. Typhimurium in weaned piglets and suggest that a use of bacteriophage can be considered a valid antibiotic alternative.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.5
• /
• pp.878-882
• /
• 2016

These days, SFCLs are being developed in order to limit fault current. However, the superconducting elements that limit the fault current have such problems as capacity increase and require auxiliary devices including cooling device. If devices that comprise the current power network can withstand fault current for at least one cycle, it is possible to limit the fault current with current limiting elements by bypassing it on the fault line. In this study, the fault current limiter was configured with current transformer, vacuum interrupter, and current limiting element. Through the experience, it was confirmed that the fault current was limited within one cycle. The superconducting element, as a current limiting element, limited the fault current by 80 % within one cycle from fault occurrence, and the passive element limited it more than 95 %. Also, through the comparison between resistance curve and power consumption curve, it was confirmed that the current limiting element using a passive element was more stable than the superconducting element that required capacity increase and other auxiliary devices. It was considered that the FCL proposed in this study could limit fault current stably within one cycle from fault occurrence by using the existing power technologies such as fault current detection and solenoid valve operating circuit.

• Korean Journal of Environment and Ecology
• /
• v.15 no.1
• /
• pp.17-25
• /
• 2001

본 연구는 조경수목의 목질 내부의 상태 진단과 변색 및 부후 부위의 탐색을 통하여 병든 부위를 조기에 제거. 병의 확산 방지 및 효율적인 예방관리를 위해 Shigometer의 이용가능성을 제시하고자 하였다. 본 연구대상지는 충남 천안시 성환흡 수향리에 위치한 연암축산원예대학으로 하였으며, 대학 구내에 식재된 조경수를 대상수종으로 하였다. 대상수종은 침엽수 7종과 활엽수 16종으로 총 23종을 선정하였다. 조사한 조경수목의 내부 전기저항치는 수종별로 매우 다양하게 나타났다. 평균 내부 전기저항치가 500k$\Omega$이상인 수종은 은행나무, 섬잣나무, 소나무, 단풍나무, 중국단풍. 홍단풍이었으며, 개체간 차이와 측정 깊이에 따른 차이도 심하지 않았다. 그러나 메타세쿼이아, 수양버들, 자귀나무, 회화나무는 200k$\Omega$이하의 낮은 내부 전기저항치를 나타냈다. 측정 깊이에 따른 변화가 심한 수종은 전나무, 메타세쿼이아, 수양버들, 느티나무, 튤립나무, 목련, 일본목련, 핀오크, 벚나무등으로 이들은 측정 깊이에 따라 전기저항치가 갑자기 하락하는 부위를 포함하고 있었으며, 전기저항치가 갑자기 하락하는 부위의 목재는 부후되어 있었다. 결론적으로 Shigometer는 가시적인 피해증상이 나타나기 전 초기단계에서 목재의 변색 및 부후 부위를 찾아내는데 유용하게 이용될 수 있을 것으로 판단된다.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.4
• /
• pp.1297-1302
• /
• 2012

The interaction between carbon monoxide (CO) and a cobalt-salen complex (Co(salen)) was studied and applied to detect CO. The metal complex doped PEDOT:PSS film exhibited good sensitivity to CO and differentiate CO from other gases. The response of the composite to CO was reversible (RSD < 5%) change in resistance upon removal of CO gas from the test chamber. The effects of adding Co(salen) in the probe film on the response of the sensor were investigated using AFM, XPS, and FT-IR spectroscopy. The sensitivity of the sensor increased as the Co(salen) concentration enhanced as it increased from 0.0 to 1.5 wt. %, where the highest sensitivity ($%{\Delta}R/R_o$) of $-25.0{\pm}0.05%$ was achieved with 1.0 wt. % Co(salen). The sensor containing probe exhibited a linear response ($R^2$ = 0.983) in the range of 0.5 to 10.0% CO (v/v) $N_2$, and the detection limit was 1.74% CO (v/v) in $N_2$.

• Nuclear Engineering and Technology
• /
• v.52 no.10
• /
• pp.2394-2401
• /
• 2020

Octadecylamine is an effective film-forming amine that protects carbon steel from corrosion. In the present study, the effect of octadecylamine concentration on adsorption on a carbon steel surface was investigated in anaerobic alkaline solution by using SEM/EDS, TEM and the Materials Studio simulation techniques. TEM morphology observation and EDS elemental detection determine the thicknesses of octadecylamine film on a carbon steel surface, which are confirmed by the in-situ electrochemical impedance spectroscopy measurement and resistance calculation. The Materials Studio simulation reveals the number of octadecylamine film layers at different concentrations. Results obtained in this study indicate that adsorption of octadecylamine film on carbon steel proceeds with the multi-layer adsorption mechanism.

• Korean Journal of Clinical Laboratory Science
• /
• v.38 no.3
• /
• pp.173-178
• /
• 2006

The production of extended-spectrum ${\beta}$-lactamases ($ESBL_S$) is the main mechanism of bacterial resistance to third-generation cephalosporins and monobactams, whose prevalence varies depending on the different geographical areas. In the last years it has increased notably to the point of being considered a health problem of great importance. The characterization of the ESBLs producing Klebsiella penumoniae strains present in clinical isolates is time-consuming. I describe here the development of a new system, which consists of a multiplex PCR. I found 51 K. pneumoniae strains to be presumptive strains ESBLs producers by clinical and laboratory standards institute (CLSI) guidelines. The double disc synergy test showed 47 positive K. pneumoniae, which were K. pneumoniae isolates. All ESBLs producing K. pneumoniae strains were resistant to antibiotic amikacin, gentamicin and ciprofloxacin. By multiplex PCR analysis, $bla_{TEM}$ gene in 17 strains 44 $bla_{SHV}$ genes and $bla_{CTX}$ genes in 33 strains were identified. In this study, the multiplex polymerase chain reaction (PCR) assay was a good method to detect and differentiate ESBLs producing K. penumoniae strains in clinical isolates.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.6
• /
• pp.427-432
• /
• 2018

High-capacity secondary batteries can cause explosion hazards owing to microcurrent variations or current surges that occur in short circuits. Consequently, complete safety cannot be achieved with general protection that is limited to a mere current fuse. Hence, in the case of secondary batteries, it is necessary for the protector to limit the inrush current in a short circuit, and to detect the current during microcurrent variations. To serve this purpose, a fuse can be employed for the secondary battery protection circuit with current detection. This study aims at designing a protection device that can stably operate in the hazardous circumstances associated with high-capacity secondary batteries. To achieve the said objective, a detecting fuse was designed from an alloy of low melting point elements for securing stability in abnormal current states. Experimental results show that the operating I-T and V-T characteristic constraints can be satisfied by employing the proposed current detecting self-contained low melting point fuse, and through the resistance of the heating resistor. These results thus verify that the proposed protection device can prevent the hazards of short circuit current surges and microcurrent variations of secondary batteries.