• Journal of Periodontal and Implant Science
• /
• v.24 no.1
• /
• pp.15-25
• /
• 1994

Keratinized ginigva has clinical singificance in periodontal health because it plays important roles in resistance to mechanical trauma, to penetration of bacteria, and to tensional stress by muscle attachment. In order to investigate the width change of anterior keratinized gingvial during transitional period, the width of kerainized gingiva on anterior teeth was measured annually in elementary school children with deciduous dentition until the successive anterior teeth were completely erupted. The distance from the gingival margin on mid-portion of crown to mucogingival junction was measured by Boley gauge(Hu-Friedy, U.S.A.) and was recorded as the width of keratinized gingiva. The difference of the width of keratinized gingiva according to sex and dentition was analyzed statistically by Student t-test. Following results were obtained : 1. In deciduous dentition, it was shown that the width of keratinized gingiva on maxillary central incisors($3.28{\pm}0.83mm$) was the widest(p<0.01), and that on maxillary lateral incisors, mandibular central and lateral incisors was $2.69{\pm}0.86mm$, $2.51{\pm}0.71mm$, $2.43{\pm}0.68mm$, respectively. 2. In mixed dentition, it was shown that the width of keratinized gingiva on maxillary central incisors ($5.10{\pm}0.86$) was the widest(p<0.01), and that on maxillary lateral incisors, mandibular central and lateral incisors was $4.35{\pm}0.83mm$, $3.51{\pm}0.60mm$, $3.57{\pm}0.66mm$, respectively. 3. The width of anterior keratinized gingiva was significantly increased after the successive anterior teeth were completely erupted(p<0.001). The width of keratinized gingiva on maxillary central and lateral incisors, and mandibular central and lateral incisors was increased by $1.82{\pm}0.83mm$, $1.65{\pm}0.69mm$, $0.99{\pm}0.39mm$, and $1.14{\pm}0.98mm$, respectively. 4. There was no statistical significance in the difference of the width of anterior keratinized gingiva between male and female(p>0.05).

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.1
• /
• pp.74-82
• /
• 2014

For this research, prepared ammonium dihydrogen phosphate aqueous solution and polyurethane dispersion. Use these resin, this article has been analyzed about change of mechanical properties by increasing amount of ammonium dihydrogen phosphate aqueous solution in polyurethan resin on coated leather and dried film. According to measure data for solvent resistance, DPU(polyurethane dispersion) resin and DPU-AD1, D2, D3(samples of polyurethaneresin with ammonium dihydrogen phosphate aqueous solution) had good property. As known in the results, increase of ammonium dihydrogen phosphate constant did not influence to big change of polyurethane resin properties. As test of tensile strength, DPU had highest tensile characteristic($3.114kg_f/mm^2$) and DPU-AD3 had lowest tensile characteristic($2.510kg_f/mm^2$). As same as tensile characteristic, abrasion test determined DPU(50.5 mg.loss) had highest properties. In elongation case, DPU had best properties(602 %) in this experiment.

• Journal of the Korean Chemical Society
• /
• v.53 no.2
• /
• pp.175-188
• /
• 2009

In this study, we developed an experimental method of the Charles' law applicable to school. Science textbooks and literatures on this principle were analyzed to extract factors utilized in organizing the experimental setup and method. A combined structure such as with a vial and a glass tube, the former of which is for deciding the total volume and the latter of which is for easy measurement of volume, was better in measurement of volume with temperature rather than a simple structure such as syringe. Use of graduated cylinder as a water bath to control the temperature showed advantage in cooling time than using other bath of larger volume such as a beaker. A liquid drop was used as a plug in the glass tube. This plug has little resistance with the glass wall when the gas volume changes. Water as a liquid drop in the glass tube had a significant effect in volume change of gas due to evaporation, especially in the beginning of the measurement. Glycerol showing negligible effect in volume change was used. This method took about one hour and produced a good linear relationship between the temperature and volume of gas with $R^2$ = 0.999 and absolute zero temperature = $-216.7\;{^{\circ}C}$. The Charles' law experiment developed in this study can be performed with appropriate adjustment of procedure considering the purpose of the curriculum of science and chemistry subject at each school level.

• Proceedings of the SAREK Conference
• /
• 2008.11a
• /
• pp.170-174
• /
• 2008

Recently, a problem related to the thermal management in portable electronic and telecommunication devices is becoming issued. That is due to the trend of slimness of the devices, so it is not easy to find the optimal thermal management technology for the devices. From now on, a pressed circular type cooling device has been mainly used, however the cooling device with thin thickness is becoming needed by the inner space constraint. In the present study, the silicon and metal flat plate type cooling device with the separated vapor and liquid flow path was designed and fabricated. Through the experimental study, the normal isothermal characteristic by vapor-liquid phase change was confirmed and the cooling device with 70mm of total length showed 6.8W of the heat transfer rate within the range of $4{\sim}5^{\circ}C$/W of thermal resistance. In the meantime, the metal cooling device was developed for commercialization. The device was designed to have all structures of evaporator, vapor flow path, liquid flow path and condenser in one plate. And an envelope of that could be completed by combining the two plates of same structure and size. And the simplicity of fabrication process and reduction of manufacturing cost could be accomplished by using the stamping technology for fabricating large flow paths relatively. In the future, it will be possible to develop the commercialized cooling device by revising the fabrication process and enhancing the thermal performance of that.

• Food Science and Preservation
• /
• v.19 no.3
• /
• pp.344-353
• /
• 2012

This study was carried out to investigate the rheological properties of dough and the quality characteristics of breads with Saesalbori (non-waxy barley) and Saechalbori (waxy barley) flours added at concentrations of 10, 20, and 30% to wheat flour. The maximum viscosity increased in the Saesalbori flour mixtures and decreased in the Saechalbori flour mixtures. The dough stability of the 10% barley flour mixtures was equal to that of the control while that of the 30% barley flour mixtures decreased more. The extensibility of the dough decreased with the increasing level of barley flour in all the blends, but the resistance of the dough increased. As the ratio of barley flour increased, the loaf volume of the breads significantly decreased, but the bread weight increased. The 10% Saesalbori flour mixtures increased the hardness of the breads but did not cause any significant change in the other TPA parameters while the 10% Saechalbori flour mixtures did not cause any change in all the TPA parameters. The sensory evaluation results showed that the 10% barley flour mixtures had no significantly different overall acceptance from the control, and that the 20% substitution still resulted in acceptable sensory qualities. The results of the study also showed that the bread-making properties of Saesalbori were improved by germination, but those of Saechalbori declined.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.5
• /
• pp.3469-3476
• /
• 2015

The Korea Academia-Industrial cooperation Society. The Korea Academia-Industrial cooperation Society. In Korea, the territory has east high west low type and the rainfall is concentrated in the summer season. A nation having these topography and precipitation condition like Korea has to basically needs support of hardware alternatives. However, the right places decrease gradually and the resistance of the public opinion for national water resources policy stiffens gradually. The climate change has an effect in water resources fields and has a close relation. In the present study, therefore, future inflow of Miryang multipurpose dam basin is estimated by using SWAT model applied RCP 4.5 and 8.5 scenarios of "Korea Meteorological Administration" and considering the results, the future direction is purposed to operate the dam. As a result, the rainfall pattern is changed from traditional peak form to flat form. The dam operation rule in accordance with changing precipitation pattern has to be modified from the conventional operation rule and a new plan has to be established to meet a situation.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.5
• /
• pp.810-814
• /
• 2004

This research was conducted to evaluate the safety of the herbicide-resistant rice, a genetically modified organism (GMO) developed by the Rural Development Administration by exposing it to 12 months old Sprague-Dawley rats for 8 weeks. The composition of herbicide-resistant brown rice with/without heating treatment was compared with those of conventional Ilpum brown rice with/without heating treatment to assess composition equivalence. Compositional analysis was performed to measure proximates, fiber, and minerals. The nutritional components of herbicide-resistant rice were similar to those of the nontransgenic control or were within the normal range of nontransgenic rice. Four groups of experimental male rats were fed one of the following diets for eight weeks: Ilpum brown rice (I) and its heated rice (IH) as non-GMO, and herbicide-resistant brown rice (G) and its heated rice (GH) as GMO- We checked clinical symptoms (anorexia, salivation, diarrhea, polyuria, anuria, fecal change), food intake, and water consumption every day, change of body weight once a week, and serum biochemistry and organ weights after 8 weeks of experimental feeding We did not find any significant differences in the above-mentioned items. These results suggested that genetically modified herbicide-resistant rice was compositionally equivalent to conventional Ilpum rice, and nutritional characteristics and safety of herbicide-resistant rice in old male rats treated for 8 weeks were not different from those of Ilpum rice, non-GMO.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.529-535
• /
• 2018

The range extender vehicle runs on a mechanism that allows the small power generation engine to start in the most efficient specific operating range to charge the battery and extend the mileage. In this study, we developed a step motor type intake air supply system that replaces existing throttle body system to develop a simple low cost control logic system. The system was applied to the existing base engine, and in order to improve the performance by increasing the amount of intake air, the effect of changing the length of the intake and exhaust manifold was experimentally examined. As a result, the Type B intake air control actuator operated by one step motor showed higher performance than the Type A in all the operation region, but the performance was lower than that of the base engine due to the increase of flow resistance. To improve this, it was confirmed that the engine performance was improved at both speeds of 2200rpm and 4300rpm when the 140mm adapter was installed in the intake manifold and when the newly designed 70mm exhaust manifold was applied. Through this process, high - precision operation control was realized by connecting the generator load to the optimized engine for the range extender electric vehicle. Experimental results showed that the speed change rate was within ${\pm}2.5%$ at 2200rpm in 1st stage and 4300rpm in 2nd stage and the speed follow-up result of 610 rpm/s was obtained when the speed was increased from 2200rpm to 4300rpm.

• Korean Journal of Clinical Laboratory Science
• /
• v.51 no.1
• /
• pp.119-123
• /
• 2019

Obstructive sleep apnea (OSA) is a sleep disorder with no breathing symptoms due to repetitive upper airway resistance. OSA is a disease that can have significant effects on the cerebral cardiovascular system. Active treatment is needed to prevent these complications. The use of continuous positive airway pressure (CPAP), the standard therapy of OSA, has comparative therapeutic effects. On the other hand, there is no comparison report of the polysomnography (PSG) results before and after CPAP therapy without using a mask. This paper reports a patient who was diagnosed as OSA and used CPAP every night for more than 2 years. The patient showed a decrease in the apnea-hypopnea index from 64.7/h to 12.9/h. In addition, other sleep-related indicators improved significantly. The daily use of CPAP as a treatment for OSA for more than 2 years may improve the PSG results. Constant follow up of PSG will be needed to adjust the appropriate CPAP pressure to patients because there might be a change in the Apnea-Hypopnea Index and other sleep-related indicators for constant CPAP users for at least 2 years.

• Korean Journal of Heritage: History & Science
• /
• v.44 no.3
• /
• pp.78-91
• /
• 2011

The Usuki Stone Buddha Statues in Japan are carved on mainly dark gray welded lapilli tuff accompanied by lenticular fiamme. This rock is composed of matrix which contains feldspar and opaque minerals with some phenocrysts of quartz and feldspar. The matrix is slight to highly welded. The statues have been weathered and weakened by salt and freezing of water. To enhance the mechanical properties of the rock, consolidants and water repellents were applied. The absorption ratio of the rock was highly decreased after the treatment of the water repellents, the consolidant OH 100, as well. Ultrasonic velocity revealed similarly higher values in the treated rock by KSE 300 and OH 100, compared to non-treated rock. KSE 300, especially, highly increased the Equotip surface hardness. All studied consolidants and water repellents were found to change the original color of the stone. SNL, specifically, resulted the significant change in color. In addition, KSE 300 were observed to improve resistance to weathering such as microcrack and fracture through freezing-thawing test after treatment.