• Structural Engineering and Mechanics
• /
• v.42 no.4
• /
• pp.449-469
• /
• 2012

For generally damped linear systems with repeated eigenvalues and defective eigenvectors, this study provides a decomposition method based on residue matrix, which is suitable for engineering applications. Based on this method, a hybrid approach is presented, incorporating the merits of the modal superposition method and the residue matrix decomposition method, which does not need to consider the defective characteristics of the eigenvectors corresponding to repeated eigenvalues. The method derived in this study has clear physical concepts and is easily to be understood and mastered by engineering designers. Furthermore, this study analyzes the applicability of step-by-step methods, including the Newmark beta and Runge-Kutta methods for dynamic response calculation of defective systems. Finally, the implementation procedure of the proposed hybrid approach is illustrated by analyzing numerical examples, and the correctness and the effectiveness of the formula are judged by comparing the results obtained from the different methods.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.10
• /
• pp.1021-1027
• /
• 2009

Finite element models of dynamic systems can be updated in two stages. In the first stage, mass and stiffness matrices are updated neglecting damping. In the second stage, a damping matrix is estimated with the mass and stiffness matrices fixed. Methods to estimate a damping matrix for this purpose are proposed in this paper. For a system with proportional damping, a damping matrix is estimated using the modal parameters extracted from the measured responses and the modal matrix calculated from the mass and stiffness matrices from the first stage. For a system with non-proportional damping, a damping matrix is estimated from the impedance matrix which is the inverse of the FRF matrix. Only one low or one column of the FRF matrix is measured, and the remaining FRFs are synthesized to obtain a full FRF matrix. This procedure to obtain a full FRF matrix saves time and effort to measure FRFs.

• Journal of Conservation Science
• /
• v.36 no.4
• /
• pp.244-254
• /
• 2020

This study investigates prehistoric human subsistence and pottery use on the Korean peninsula through the organic residue analysis of archaeological potsherds. Ancient human subsistence is one of the core topics in Korean archaeology. However, due to the high acidity of sediments, which prevents the long-term preservation of organic remains, archaeologists have been short of critical information on how these early prehistoric dwellers lived. Ceramic vessels can contain well-preserved lipids originating from past culinary practices. For a better understanding of human subsistence on the prehistoric Korean peninsula, food-processing behaviors were reconstructed by analyzing ancient lipids extracted from a pottery matrix. The potsherd samples used in the analysis in this paper were collected from major prehistoric habitation sites. The results show that subsistence strategies differed according to both location and time period and reveal how organic residue analysis can contribute to a better understanding of prehistoric human subsistence strategies.

• Korean Journal of Veterinary Service
• /
• v.45 no.3
• /
• pp.229-236
• /
• 2022

This study describes an analytical method based on LC-MS/MS for the quantitation of 5 fluoroquinolones (Enrofloxacin, Ciprofloxacin, Marbofloxacin, Norfloxacin and Danofloxacin) in meat, and was applied to 230 meat samples for validation. Quantitation was performed based on a matrix-matched calibration to compensate for the matrix effect on the electrospray ionization. Good linear calibrations (R²≥0.998) were obtained for all fluoroquinolones at 6 concentrations of 1~50 ㎍/kg. Satisfied recoveries of all fluoroquinolones were demonstrated in spiked meat at three levels from 10 to 50 ㎍/kg. The recoveries ranged between 75.8~99.2% in beef, 80.1~99.6% in pork and 72.2~99.8% in chicken, respectively. The limits of quantitation (LOQs) for fluoroquinolones ranged from 0.7 to 3.2 ㎍/kg. We also monitored fluoroquinolones residue in the sample (beef 107, pork 71, chicken 52) using LC-MS/MS. Residues of fluoroquinolones which exceeded maximum residue limits (MRL) were not exceed in any of the 230 samples.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.15 no.3
• /
• pp.191-199
• /
• 2011

In this paper, we adopt a position specific scoring matrix as an abstraction of amino acid type to derive two new statistical potentials for protein structure prediction, and investigated its effect on the quality of the potentials compared to that derived using residue specific amino acid identity. For stringent test of the potential quality, we carried out folding simulations of 91 residue A chain of protein 2gpi, and found unexpectedly that the abstract amino acid type improved the quality of the one-body type statistical potential, but not for the two-body type statistical potential which describes long range interactions. This observation could be effectively used when one develops more accurate potentials for structure prediction, which are usually involved in merging various one-body and many-body potentials.

• Bulletin of the Korean Chemical Society
• /
• v.17 no.11
• /
• pp.1036-1039
• /
• 1996

Synthetic lipoidal peptides based on viral protein sequences have been prepared. These peptides contain an N-palmitoyl group at the N-terminal residue, which is a modified cysteine, containing a S-[2,3-bis(acyloxy)-(2-R,S)-propyl] moiety. When this residue (Pam3Cys) is at the N-terminus of a synthetic peptide, it acts as potent immunoadjuvant to enhance both IgM and IgG antibody responses to the attached peptide. Conventional analytical procedures (e.g., Edman degradation and amino acid analysis) are either not applicable due to the N-terminal modification, or do not provide confirmation of the intact structure. Chromatographic analysis is also hindered by the tendency of these lipoidal Pam3Cys peptides to form large aggregates, and in some cases to be permanently adsorbed on reversed phase columns. We have applied several mass spectrometric techniques, including fast atom bombardment (FAB), electrospray ionization (ESI) and matrix assisted laser desorption ionization (MALDI) to characterize the intact structures of a number of different Pam3Cys synthetic peptides. The MALDI-MS has been found to be the most sensitive for the analysis of the structure of Pam3Cys peptides.

• Advances in concrete construction
• /
• v.15 no.3
• /
• pp.149-159
• /
• 2023

Water glass (WG) and sodium sulfate (SS) were used to prepare polymeric aluminum chloride residue cement mortar (PACRM) by single and compound blending with polymeric aluminum chloride waste residue, respectively. The structural strength and textural characteristics examinations showed that PACRM consistency increased by incorporating WG, but decreased by incorporating SS. When WG and SS were compounded, the mortar consistency initially rose before falling. The compressive strength of PACRM increased and then decreased as WG was increased. The mechanical properties of PACRM were better enhanced by SS than WG, showing no strength deterioration. The main reason for the improved mechanical properties of polymeric aluminum chloride waste residue in the presence of activators is the increased precipitation of reactive substances, such as C-S-H gels, calcium silica, and Ca(OH)₂. The density of the specimens with PACRM and the degree of aggregation of hydration products were significantly enhanced by generating more hydration products in the mortar. Further, the cracks and pores were significantly reduced, and the matrix structure was continuous and dense at 5% SS doping and 3% compound doping.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.10
• /
• pp.69-76
• /
• 1993

In this paper we propose a design of a digital neuron processor using the residue number system for efficient matrix.vector multiplication involved in neural processing. Since the residue number system needs no carry propagation for modulus operations, the neuron processor can perform multiplication considerably fast. We also propose a high speed algorithm for computing the sigmoid function using the specially designed look-up table. Our method can be implemented area-effectively using the current technology of digital VLSI and siumlation results positively demonstrate the feasibility of our method. The proposed method would expected to adopt for application field of digital neural network, because it could be realized to currently developed digital VLSI Technology.

• Analytical Science and Technology
• /
• v.12 no.5
• /
• pp.415-420
• /
• 1999

We estimated the quantity of the scum remaining on the Black Matrix (BM) surface of color filter. To do this, histogram was analyzed which was obtained from AFM image of the BM surface. We divided the histogram to two Gaussian functions of the free BM surface (1) and the scum (2), and calculated the areas ($a_1$, $a_2$) of both the Gaussian functions. We quantified the residue as the ratio of the area ($a_2/(a_1+a_2)$). As a result of the Gaussian functions of the free BM surface, it was revealed that another kind of residue remained on the BM surface. It was difficult to quantify it. but it could relatively be estimated from the average height and the standard deviation.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.2
• /
• pp.44-50
• /
• 1993

In this paper, we will present an array processor for implementation of digital neural networks. Back-propagation model can be formulated as a consecutive matrix-vector multiplication problem with some prespecified thresholding operation. This operation procedure is suited for the design of an array processor, because it can be recursively and repeatedly executed. Systolic array circuit architecture with Residue Number System is suggested to realize the efficient arithmetic circuit for matrix-vector multiplication and compute sigmoid function. The proposed design method would expect to adopt for the application field of neural networks, because it can be realized to currently developed VLSI technology.