• Structural Engineering and Mechanics
• /
• v.83 no.1
• /
• pp.93-108
• /
• 2022

Real-time hybrid simulation (RTHS) was applied to investigate the train-bridge interaction of a high-speed railway system, where the railway bridge was selected as the numerical substructure, and the train was physically tested. The interaction between the two substructures was reproduced by a servo-hydraulic shaking table. To accurately reproduce the high-frequency interaction responses ranging from 10-25Hz using the hydraulic shaking table with an inherent delay of 6-50ms, an adaptive time series (ATS) compensation algorithm combined with the linear quadratic Gaussian (LQG) was proposed and implemented in the RTHS. Testing cases considering different train speeds, track irregularities, bridge girder cross-sections, and track settlements featuring a wide range of frequency contents were conducted. The performance of the proposed ATS+LQG delay compensation method was compared to the ATS method and RTHS without any compensation in terms of residual time delays and root mean square errors between commands and responses. The effectiveness of the ATS+LQG method to compensate time delay in RTHS with high-frequency responses was demonstrated and the proposed ATS+LQG method outperformed the ATS method in yielding more accurate responses with less residual time delays.

• The Korean Journal of Applied Statistics
• /
• v.33 no.4
• /
• pp.467-482
• /
• 2020

We investigate a monitoring procedure for the early detection of parameter changes in location-scale time series models. We introduce a detector for monitoring procedure based on modified residual cumulative sum (CUSUM). The asymptotic properties of the monitoring procedure are established under the null and alternative hypotheses. Simulation results and data analysis are also provided for illustration.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.26 no.5
• /
• pp.860-865
• /
• 1997

Investigations were performed on the effects of extraction temperature, pressure, time on solubility and selectivity of egg yolk lipid and cholesterol, and color and fatty acid composition of the residue in supercritical carbon dioxide(SC-Co$_2$) extraction. Lipid and cholesterol solubility increased as the increase of Co$_2$ density and was found to strongly depend on the extraction pressure rather than the extraction temperature. The relative concentration of cholesterol in the extract increased with an increase in temperature and decreased with an increase in pressure and extraction time. extraction of dried eg yolk for 3hr at 4$0^{\circ}C$/276 bar removed 46.1% of cholesterol from the residual egg yolk with a yield of 63.2%. SC-Co$_2$ extraction produced a lighter color egg yolk with less redness and yellowness. As the extraction time increased, the resultant residual egg yolk became more saturated with fatty acids. SC-$CO_2$ extraction offers a safe, natural method for removing cholesterol from dried egg yolk.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.2
• /
• pp.417-426
• /
• 1996

The end-to-end service clock recovery is a critical issue in providing constandt bit rate service through ATM network. The Synchronous Residual Time Stamp(SRTS) algorithm is used to recovery the source clock using time stamp of transmitter. In thispaper, we propose a Differential Residual Time Stamp (DRTS) transmission mechanism to effectively deliver the timing information of source clock in SRTS algorithm. The RTS transmission method simple in its hardware. From the results of field trial of DS3 rate interactive video communication system through B-ISDN testbed, it can be identified that DRTS method is superior to the RTS method.

• Journal of Korea Foundry Society
• /
• v.9 no.5
• /
• pp.389-395
• /
• 1989

The effects of phosphorus and boron additions and isothermal holding time on the residual magnesium and sulfur content, and on the resultant graphite structure of cast irons were investigated. The effective recovery ratio of magnesium showed that adding phosphorus to the melt retarded the fading rate of magnesium but adding boron accelerated it. However, the residual sulfur content was found to be decreased with isothermal holding time at the begining, and then to be increased again with holding time by resulfurization. The Mg-Equivalent for producing compacted vermicular graphite structure was found to be increased with the addition of phosphorus, whereas to be decreased with the addition of boron.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.25 no.1
• /
• pp.13-19
• /
• 2015

Among the various possible factors affecting the Minority Carrier Life Time (MCLT) of the mc-Si crystal, dislocations formed during the cooling period after solidification were found to be a major element. It was confirmed that other defects such as grain boundary or twin boundary were not determinative defects affecting the MCLT because most of these defects seemed to be formed during the solidification period. With a measurement of total thickness variation (TTV) and bow of the silicon wafers, it was found that residual stress remaining in the mc-Si crystal might be another major factor affecting the MCLT. Thus, it is expected that better quality of mc-Si can be grown when the cooling process right after solidification is carried out as slow as possible.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.4
• /
• pp.439-442
• /
• 2004

In this study, we investigated about electrooptics characteristic of three kinds of TN cell on the polyimide surface. Monodomain alignments of thermal stressed TN cell over temperature of liquid crystal isotropic phase were almost the same as that of no thermal stressed TN cells. However, the thermal stressed TN cells have many defects. Also, threshold voltage and response time of thermal stressed TN cells show the same performances as no thermal stressed TN cells. There were little changes of value in these TN cells. However, transmittances of TN cells on the polyimide surface decrease with increasing thermal stress time. Finally, the residual DC voltage of the thermal stressed TN cell on the polyimide surface shows decrease of characteristics as increasing thermal stress time. Therefore, the thermal stability of TN cell was decreased by high thermal stress for the long times.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.451-452
• /
• 2005

In this study, the threshold voltage and the response time of thermal stressed TN-LCDs showed the same performances on none thermal stressed TN-LCDs. There was little change in TN cells. Also, while increasing thermal stress time, the transmittances of TN-LCDs on the rubbed PI surface were almost the same, But the thermal stability of TN cell was deteriorated.

• Journal of the Korean Society of Industry Convergence
• /
• v.27 no.4_2
• /
• pp.1001-1007
• /
• 2024

Recent deep learning algorithms for object detection in real-time play a crucial role in various applications such as autonomous driving, traffic monitoring, health care, and water quality monitoring. The size of small objects, in particular, significantly impacts the accuracy of detection models. However, data containing small objects can lead to underfitting issues in models. Therefore, this study developed a deep learning model capable of quickly detecting small objects to provide more accurate predictions. The RE-SOD (Residual block based Small Object Detector) developed in this research enhances the detection performance for small objects by using RGB separation preprocessing and residual blocks. The model achieved an accuracy of 1.0 in image classification and an mAP50-95 score of 0.944 in object detection. The performance of this model was validated by comparing it with real-time detection models such as YOLOv5, YOLOv7, and YOLOv8.

• Journal of Chest Surgery
• /
• v.29 no.2
• /
• pp.147-152
• /
• 1996

his study was undertaken to assess the residual interventricular shunt following surgical closure of the isolated ventricular septal defect. From January 1989 through December 1993, 211 patients underwent surgical closure of the isolated ventricular septal defect. All patients had 2D-Echocardlo-graphic study after operation to rule out residual ventricular septal defect. There was a 9.5% incidence of a definite residual shunt. The type of ventricular septal defect, closure method of the defect and cardiopulmonary bypass time showed no significant differences between two groups. The sue of ventricular septal defect (6.3 $\pm$ 3.7mm versus 10.6 $\pm$ 5.8mm : p : 0.0034), aortic cross-clamping time(32.6 $\pm$ 15.0 minutes versus 48.5 $\pm$ 20.0 minutes, p : 0.0003), pulmonary-to-systemic pressure ratio(0.31 $\pm$ 0.22 versus 0.51 $\pm$ 0.33, p=0.019) and mean pulmonary artery pressure(20.3 $\pm$ 11.9 mmHg versus 29.1 $\pm$ 16.2 mmHg, p : 0.009) were meaningfully different between two groups. There were 9 insta ces of spontaneous closure of the residual shunts at mean 21 months of following up (ranged 1 ~43 months). In conclusion, we suggest that the size of ventricular septal defect, aortic cross-clamping time and mean pulmonary artery pressure may play an important role in occurance of residual ventricular septal defect.