• KSBB Journal
• /
• v.24 no.6
• /
• pp.556-562
• /
• 2009

The biological treatment of TNT-containing wastewater, known commonly as pink water, was investigated using a stirred tank reactor with Stenotrophomonas maltophilia OK-5 bacterial culture. S. maltophilia OK-5 exhibited effective degradation of TNT contained in pink water, completely degrading TNT (100 mg/L) within 6 days of incubation. The dark-red brown color derived from Hydride-Meisenheimer complex became more pronounced during the incubation period, which was determined quantitatively. High-pressure liquid chromatography was used to measure residual TNT, which also resolved the metabolic intermediates (i.e., 2,4-dinitrotoluene, 2,6-dinitrotoluene and 2,4-dinitro-6-hydroxytoluene). Gas chromatography-mass spectrometry was used to verify these intermediates. Quantification of the nitroreductase (pnrB) gene isolated from S. maltophilia OK-5 growing in pink water was performed with real-time PCR. The amount of pnrB gene copies increased to $10^3$-fold after 5 days of incubation time.

• The KIPS Transactions:PartC
• /
• v.17C no.3
• /
• pp.259-270
• /
• 2010

In this paper, a Location Information-based Gradient Routing (LIGR) algorithm is proposed for setting up routing path based on physical location information of sensor nodes in wireless ad-hoc networks. LIGR algorithm reduces the unnecessary data transmission time, route search time, and propagation delay time of packet by determining the transmission direction and search range through the gradient from the source node to sink node using the physical location information. In addition, the low battery nodes are supposed to have the second or third priority in case of forwarding node selection, which reduces the possibility of selecting the low battery nodes. As a result, the low battery node functions as host node rather than router in the wireless sensor networks. The LIGR protocol performed better than the Logical Grid Routing (LGR) protocol in the average receiving rate, delay time, the average residual energy, and the network processing ratio.

• Structural Engineering and Mechanics
• /
• v.74 no.6
• /
• pp.789-807
• /
• 2020

Multiple earthquakes that occur during short seismic intervals affect the inelastic behavior of the structures. Sequential ground motions against the single earthquake event cause the building structure to face loss in stiffness and its strength. Although, numerous research studies had been conducted in this research area but still significant limitations exist such as: 1) use of traditional design procedure which usually considers single seismic excitation; 2) selecting a seismic excitation data based on earthquake events occurred at another place and time. Therefore, it is important to study the effects of successive ground motions on the framed structures. The objective of this study is to overcome the aforementioned limitations through testing a two storey RC building structural model scaled down to 1/10 ratio through a similitude relation. The scaled model is examined using a shaking table. Thereafter, the experimental model results are validated with simulated results using ETABS software. The test framed specimen is subjected to sequential five artificial and four real-time earthquake motions. Dynamic response history analysis has been conducted to investigate the i) observed response and crack pattern; ii) maximum displacement; iii) residual displacement; iv) Interstorey drift ratio and damage limitation. The results of the study conclude that the low-rise building model has ability to resist successive artificial ground motion from its strength. Sequential artificial ground motions cause the framed structure to displace each storey twice in correlation with vary first artificial seismic vibration. The displacement parameters showed that real-time successive ground motions have a limited impact on the low-rise reinforced concrete model. The finding shows that traditional seismic design EC8 requires to reconsider the traditional design procedure.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.41 no.6
• /
• pp.440-445
• /
• 2008

Ciprofloxacin is the most commonly used fluoroquinolones for treating bacterial disease in olive flounder (Paralichthys olivaceus) farming, but its withdrawal time for industrial-scale farming has not been established. The depletion of ciprofloxacin was investigated in the olive flounder under field conditions. Fish were kept in an inland fish farm and fed a commercial diet containing 5 mg/kg of ciprofloxacin for 13 days. Seven fishes per sampling time were examined during and after the treatment. Ciprofloxacin and its major metabolite, enrofloxacin, were analyzed using HPLC with a fluorescence detector. The concentrations of ciprofloxacin and enrofloxacin in muscle increased during the medication period, and then decreased rapidly. The ciprofloxacin and enrofloxacin concentration in the olive flounder peaked on days 11 and 13, respectively, with maximum concentrations in muscle of 0.58 and 0.73 mg/kg. Residual ciprofloxacin and enrofloxacin were eliminated rapidly; 6 days after treatment, the respective levels in muscle were 0.04 and 0.10 mg/kg and neither was detected 15 days post treatment. The level of ciprofloxacin accumulation at the beginning of oral administration was variable according to the farming conditions, but the overall exhaustion time was similar. In conclusion, an adequate withdrawal period for enrofloxacin is 15 days in the case of oral ciprofloxacin administration.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.1046-1053
• /
• 2006

In the large scale recent reclaiming works performed within the wide spatial boundary, evaluation of long-term consolidation settlement and residual settlement of the whole construction area is sometimes made with the results of the limited ground investigation and measurement. Then the reliability of evaluation has limitations due to the spatial uncertainty. Additionally, in case of large scale deep excavation works such as urban subway construction, there are a lot of hazardous elements to threaten the safety of underground pipes or adjacent structures. Therefore it is necessary to introduce a damage prediction system of adjacent structures and others. For the more accurate analysis of monitoring information in the wide spatial boundary works and large scale urban deep excavations, it is necessary to perform statistical and spatial analysis considering the geographical spatial effect of ground and monitoring information in stead of using diagrammatization method based on a time-series data expression that is traditionally used. And also it is necessary that enormous ground information and measurement data, digital maps are accumulated in a database, and they are controlled in a integrating system. On the abovementioned point of view, we developed Geomonitor 2.0, an Internet based real time monitoring program with a new concept by adding GIS and geo-statistical analysis method to the existing real time integrated measurement system that is already developed and under useful use. The new program enables the spatial analysis and database of monitoring data and ground information, and helps the construction- related persons make a quick and accurate decision for the economical and safe construction.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.39 no.2
• /
• pp.72-77
• /
• 2006

Enrofloxacin (ENRO) is one of the most commonly used fluoroquinolones for treating bacterial disease in olive flounder (Paralichthys olivaceus) farming, but its withdrawal time for industrial-scale farming has not been well established. Withdrawal times of ENRO following oral administration were evaluated in olive flounder under field conditions. Fish were held in an inland fish tank and fed a commercial mediated diet containing 5 mg/kg of ENRO for 9 days. Seven fish per sampling point were examined during and after treatment. ENRO and its major metabolite, ciprofloxacin (CIP), were analyzed using high-performance liquid chromatography with a fluorescence detector. The concentration of ENRO and CIP in muscle increased during the medication period, and then decreased rapidly The sum of ENRO and CIP concentration in olive flounder peaked on day 6, with a maximal concentration in muscle of 4.30 mg/kg. ENRO residues were eliminated rapidly; at 10 days post treatment, the level in muscle was 0.10 mg/kg, but it took about 50 days to be reduced to below 0.1 mg/kg. After 60 days, the residual concentration was below 0.1 mg/kg in all samples. The level of ENRO accumulation at the beginning of oral administration was variable, according to the farming conditions, but the overall exhaustion time was almost the same. We concluded that an adequate withdrawal period of enrofloxacin is 60 days in the case of oral administration.

• Journal of the Korean Ceramic Society
• /
• v.39 no.12
• /
• pp.1149-1152
• /
• 2002

Indentation was used to analyze high pressure phases of silicon. Phase transformations on both loading time and loading rate were studied. Micro-raman spectroscopy was used to observe the indentation-induced transformations. As the loading time increased, Si-III and Si-XII disappeared and only a-Si was observed in (111) samples. As the loading time increased, the residual stress was removed by creation of cracks or dislocations. At 0.1 mm/min loading rate, pop-in . At 5 mm/min loading rate pop-in was observed in force/displacement curve of (111) sample, but pop-in was not observed in force/displacement curve of (100) sample. This result indicates that the loading rate affects the volume of phase transformation in silicon.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.47 no.5
• /
• pp.351-359
• /
• 2021

Objectives: Despite treatment, the pre-traumatic facial appearance of patients with maxillofacial fractures might not be able to be restored, and this difference can affect the person's quality of life (QoL). This study was designed to evaluate changes in QoL of people with maxillofacial fractures. Materials and Methods: The study population was comprised of participants with maxillofacial fracture and age- and sex-matched healthy controls without history of such fracture. QoL was measured using the World Health Organization Quality of Life BREF (WHOQOL-BREF) questionnaire, which was administered to the patients before treatment (Time 1), at 6 weeks post-treatment (Time 2), and at 12 weeks postoperatively (Time 3). The values were compared with those of healthy controls. The QoL was compared between closed reduction group and open reduction and internal fixation group. Results: The QoL scores of people with maxillofacial fracture before treatment were significantly lower (P=0.001) than those of healthy controls in all domains of the WHOQOL-BREF. The QoL scores in the psychological and social domains of patients with maxillofacial fracture at Time 3 were still lower than those of healthy controls (P=0.001). Conclusion: The QoL of patients with maxillofacial fracture was significantly reduced before treatment in all domains and remained reduced in both psychological and social domains weeks after treatment. Therefore, clinicians must be aware of and manage the residual psychosocial issues that can accompany the post-treatment period of maxillofacial injury.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.4
• /
• pp.515-521
• /
• 2020

Recently, data traffic has exploded due to development of various industries, which causes problems about losing of efficiency and overloaded existing networks. To solve these problems, network slicing, which uses a virtualization technology and provides a network optimized for various services, has received a lot of attention. In this paper, we propose a resource allocation method using credit value. In the method using the clustering technology, an operation for selecting a cluster is performed whenever an allocation request for various services occurs. On the other hand, in the proposed method, the credit value is set by using the residual capacity and balancing so that the slice request can be processed without performing the operation required for cluster selection. To prove proposed method, we perform processing time and balancing simulation. As a result, the processing time and the error factor of the proposed method are reduced by about 13.72% and about 7.96% compared with the clustering method.

• Journal of the Korean Society of Safety
• /
• v.38 no.5
• /
• pp.1-7
• /
• 2023

This study analyzes the operational characteristics of 311 aged and non-aged residual current circuit breakers (RCCBs) in low-voltage consumer contexts. It investigates the influence of external temperature and harmonics based on the rated current multiples. To simulate temperature variations, a convectional oven was used around the circuit breakers. Additionally, the generation of harmonic reference signals and data measurement for overcurrent experiments were conducted using NI SCXI, myDAQ, and LabVIEW. An observation revealed that as the ambient temperature increased, the operating time of RCCBs decreased in the time delay region. This was attributed to the faster response or bending of the bimetal, which is the tripping element. However, aged RCCBs encountered challenges with tripping outside the protective curve. The operating time of the circuit breakers exhibited an acceleration influenced by the order and content of harmonic currents, potentially leading to malfunctions. Aged RCCBs demonstrated faster operating times than their non-aged counterparts. However, the difference in operating time varied based on the manufacturer's and operating environment of the RCCBs. Frequent malfunctions of RCCBs can result in power outages. In cases where these circuit breakers fail to operate, they can lead to secondary damages, including electrical fires and shocks. Consequently, it is imperative to consider the operating environment of RCCBs and provide appropriate replacement cycles to mitigate these risks.