• Journal of Soil and Groundwater Environment
• /
• v.13 no.4
• /
• pp.62-68
• /
• 2008

The Low Temperature Thermal Desorption (LTTD) System equipped with a soil transfer unit, a rotary kiln, RTO, cyclones and a bag filter etc. was developed. The LTTD system was designed to be economically operated using LPG as a fuel and recirculating the discharged gas from the LTTD system through RTO. For the performance test of LTTD system the soil contaminated with light and heavy oils (2,690 mg TPH/kg soil) and with particle sizes below 50 mm was fed into the rotary kiln of LTTD system at 7$m^3$/hr with retention time of 15 minutes. Operation temperatures of LTTD system for the removal of soil TPH were $567^{\circ}C$ and $692^{\circ}C$. The residual TPH after treatment was 46 mg/kg and 32mg/kg respectively at each temperature condition, which shows high TPH removal efficiencies of the developed LTTD as 98.3% and 98.9%.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.5 no.2
• /
• pp.25-33
• /
• 2002

We were trying to understand indirectly the range of the discharge from the Nakdong with the dispersion of suspended solid(SS) related to the amount of discharge from river in this study. The range of dispersion of SS from the Nakdong was estimated using satellite remote sensing and numerical modeling. The stream field with two dimensional and numerical model using the condition of integrated depth was calculated. According to the results, the streamline flowed from Busan to the Jinhae Bay and Geojae Island. at the flood. The situation at the ebb was totally changed. The streamline flowed out Busan from the Bay. The velocity in offshore was faster than one at coastal water of the Nackdong. Residual current which was averaged during 12hours dominantly appeared the dominant direction from the southwestern part of the Nackdong to the northeastern part of it. The eastward current appeared at the eastern coast of Gaduck Is. Base on the results of the velocity field, the quantifying of the dispersion of SS was estimated by the method of numerical tracer related to the Lagrangian method. The significant range of the dispersion of the SS from the Nackdong was from the eastern coast of Gaduck Is, to the coastal areas of Busan, Korea. The estimated range of the dispersion of the SS using the SeaWiFS and Landsat satellite data was similar to the estimated results using the numerical model.

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.2
• /
• pp.161-168
• /
• 2020

Failure of fixed implant supported prosthesis is caused by biomechanical factors such as excessive occlusal stress and biological factors such as bacterial infections and inflammation. Implants with severe bone resorption that have worsened without being resolved due to implant complications should be removed and then new treatments should be planned, taking into account remaining teeth, remaining implants, and residual alveolar. The patient of this case removed some of fixed implant prosthesis of mandible. The condition of the remaining alveolar bone was reassessed for further implant replacement and a few implants were placed. Then implant assisted removable partial denture (IAPRD) treatment is performed using implant surveyed bridge as abutment. Through this treatment, the clinical results were satisfactory on aspect of masticatory function recovery and oral hygiene management.

• Journal of Life Science
• /
• v.28 no.4
• /
• pp.483-487
• /
• 2018

Cypermethrin, a commonly used domestic and agricultural pyrethroid pesticide, is widely considered detrimental to the environment and to many organisms because of its residual property and toxicity. Cellulophaga lytica DAU203, isolated from coastal sediment, was chosen because it degrade cypermethrin. Cellulophaga lytica DAU203 effectively degraded cypermethrin, as the utilized carbon source and substrate, in a mineral salt medium. Effective factors, such as carbon source, nitrogen source, initial pH, and temperature, for cypermethtin biological degradation by Cellulophaga lytica DAU203 were analyzed by one factor at a time method. Temperature ($22{\sim}42^{\circ}C$), initial pH (5~9), and yeast extract concentration (0.1~2.5%[w/v]) were selected as the three most important factors. There were optimized at $33.4^{\circ}C$, pH 7.7, and 2.4%(w/v) by response surface methodology, respectively. The Box- Behnken design consisting of 46 experimental runs with three replicates was used to optimize the independent variables which significantly influenced the cypermethrin biological degradation. This model for cypermethrin degradation by Cellulophaga lytica DAU203 is highly significant (p<0.05). Under the optimized condition, Cellulophaga lytica DAU203 degraded approximately 83.7 % of the cypermethrin within 5 days. These results suggest that Cellulophaga lytica DAU203 may be useful for the biological degradation of cypermethrin in cypermethrin-contaminated environments.

• Applied Chemistry for Engineering
• /
• v.29 no.1
• /
• pp.62-66
• /
• 2018

Styrenated phenol alkoxylates (SP-A) were prepared from styrenated phenol (SP) and ethylene oxide (EO) under a homogeneous base catalyst. However, to use EO that is difficult to handle, a high-pressure reaction device capable of controlling the reaction process should be used. Additionally, when a homogeneous base catalyst is used, a neutralization process is required to remove residual bases after the reaction, and it is also difficult to separate the catalyst and the product. Therefore, in this study, we report the results of SP-A prepared from the reaction of SP and EC using only heterogeneous base catalysts. The heterogeneous base catalyst was obtained by supporting KOH on $La_2O_3$ and calcintion. Using EC instead of EO, it was possible to produce SP-A under the atmospheric rather than high-pressure reaction condition. Average molecular weights of synthesized SP-A varied greatly depending on reaction conditions. The average molecular weight of SP-A prepared using the $KOH/La_2O_3$ catalyst could be controlled arbitrarily by controlling the reaction temperature and added catalyst and EC amounts.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.12
• /
• pp.1738-1742
• /
• 2003

The whole plant of crop maize was chopped and ensiled in double-layered polyethylene bags to determine the influence of residual sugar on the fermentation of lactic acid and aerobic stability by L. buchneri in whole crop maize silage made in airstress condition. There were a total of six treatments used in this experiment as follow: added 25 g de-mineralised water per kg chopped maize serving as control (con), 37.5 g glucose solution containing 12.5 g glucose ($g_1$), 75 g glucose solution containing 25 g glucose ($g_2$), 25 g, L,.buchneri suspension intended for $10^6$ cfu $g^{-1}$ (L.b.), $g_1$+L.b. and $g_2$+L.b. All silos were opened at day 91 after ensiling for measuring the pH values, microbiological enumeration, fermentative products and aerobic stability. The dry matter loss increased significantly (p<0.01) due to inclusion of sugar or L. buchneri. The lower lactic acid concentrations were observed (p<0.01) in silages inoculated with L. buchneri only or in combination with sugar addition than the correspondent uninoculated silages. Compared with control silage, ethanol production was about 3 or 6-fold higher due to addition 12.5 or 25 g glucose per kg chopped maize at ensiling. The silages added with sugar contained less acetic acid concentration (p<0.01) than control, but silages inoculated with L. buchneri showed the contrary effects (p<0.01) at different sugar levels. No butyric acid was found in uninoculated silages, silages inoculated with L. buchneri. producted more propionic acid, 1-propanol and butyric acid. Lactic acid bacteria counts increased markedly (p<0.01) due to inoculation with L. buchneri, whereas it was reduced (p<0.01) by added sugar. No significant difference was observed in count of yeast, but inoculation with L. buchneri shows a decreasing trend. Mould count in all silages was less than 2 (log cfu $g^{-1}$). The added sugar had negative effects on aerobic stability of maize silage made under air-stress conditions, whereas inoculation with L. buchneri improves (p<0.01) the aerobic stability.

• Tunnel and Underground Space
• /
• v.30 no.5
• /
• pp.462-472
• /
• 2020

Rock classification is fundamental discipline of exploring geological and geotechnical features in a site, which, however, may not be easy works because of high diversity of rock shape and color according to its origin, geological history and so on. With the great success of convolutional neural networks (CNN) in many different image-based classification tasks, there has been increasing interest in taking advantage of CNN to classify geological material. In this study, a feasibility of the deep CNN is investigated for automatically and accurately identifying rock types, focusing on the condition of various shapes and colors even in the same rock type. It can be further developed to a mobile application for assisting geologist in classifying rocks in fieldwork. The structure of CNN model used in this study is based on a deep residual neural network (ResNet), which is an ultra-deep CNN using in object detection and classification. The proposed CNN was trained on 10 typical rock types with an overall accuracy of 84% on the test set. The result demonstrates that the proposed approach is not only able to classify rock type using images, but also represents an improvement as taking highly diverse rock image dataset as input.

• Journal of the Korean Ceramic Society
• /
• v.34 no.1
• /
• pp.79-87
• /
• 1997

Anti-reflective and anti-static double layered films were prepared on the VDT panel by sol-gel spin-coating method. Their electrical, opticla, and mechanical properties were investigated. The outer SiO2 film with low re-fractive index was coated over the inner ATO(Antimony-doped Tin Oxide)-SiO2 film which was prepared by mixing ATO sol with SiO2 at molar ratio of 68:32 to satisfy the interference condition of double layers. The heat treatment was conducted at 45$0^{\circ}C$ for 30 min where residual organics were completely removed. The sheet resistance of ATO single layer showed the minimum value of 6$\times$107$\Omega$/$\square$ at 3 mol% addition of Sb and that of SiO2/ATO-SiO2 increased slightly with increasing SiO2 mol% up to 30 mol%, and then increased steeply to the value of 3$\times$108$\Omega$/$\square$ at 32 mol%. The reflectance of double layered films was about 0.64% at the wavelength of 550nm and the transmittance increased about 3.20%. The hardness of double layered films was almost the same as that of uncoated VDT panel, 471.4kg.f/mm2.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.2A
• /
• pp.65-73
• /
• 2012

In this study, we tested structural performance of Half-Decked PSC girder which was developed for applying to long span bridge. We operated 4 point bending test with 60 m span full scale girder designed as simple bridge with hinge-roller boundary condition. Actuators were set on the both sides of girder, 5.5 m away from the center, and 4 stages of cyclic loading was applied at rate of 1 kN/sec. Through stages 1 to 4, loading and unloading 1,000 kN, 1,200 kN, 1,500 kN, and 2,000 kN were repeated and displacement, strain of concrete and steel, crack of girder were checked. From these results, the strength of girder was assessed and resilience and ductility were observed after removing the load. Since initial flexural crack occurred in the vicinity of 1,400 kN, non-linearity of load-displacement curve appeared and definite residual strain was measured at that point. The test result showed that initial cracking load was over twice the DB-24 load which means the developed girder had sufficient strength. To verify the experimental results, we numerically analyze the test and confirmed that the data were similar with results from the test above. Half-Decked PSC type of 60 m-girder developed in this study showed its adequate structural capacity through static loading test, which proved that possibility of applying the girder to actual bridges practically.

• Journal of radiological science and technology
• /
• v.34 no.1
• /
• pp.59-64
• /
• 2011

We investigated the radiation exposure caused by DIPS, which is used to identify accurate repositioning and tumor location in pediatric cancer patients proton therapy. To compare and analyze DIPS condition, 50 pediatric cancer patients who underwent proton therapy were selected in Ilsan K cancer-specialized hospital from March 2007 to October 2009. For DIP exposure, 0.09~1.57 mGy is measured in AP and lateral directions and 23.55 mGy is measured in CSI patients. In whole brain patient, the amount of a day DIP exposure dose was 1.13 mGy. During treatment period, who exposed the biggest DIP dose are whole brain patients, 632.71 mGy is exposed. It is 1.13% of prescribed dose, represented dose is adequate because it is not exceeded 2% of recommended dose. Even though the exposed dose is not exceeded more than 2% of prescribed in DIP exposure, we should recognize the radiation damage and genetic influences to pediatric cancer patients, who is much sensitive to radiation and has longer mean residual life time. Therefore, DIPS guideline for pediatric cancer patients should be indicated to minimize the radiation exposure.