• Journal of Soil and Groundwater Environment
• /
• v.17 no.2
• /
• pp.15-21
• /
• 2012

MTBE (Methyl tertiary-butyl ether) has been commonly used as an octane enhancer to replace tetraethyl lead in gasoline, because MTBE increases the efficiency of combustion and decreases the emission of carbon monoxide. However, MTBE has been found in groundwater from the fuel spills and leaks in the UST (Underground Storage Tank). Fenton's oxidation, an advanced oxidation catalyzed with ferrous iron, is successful in removing MTBE in groundwater. However, Fenton's oxidation requires the continuous addition of dissolved $Fe^{2+}$. Zero-valent iron is available as a source of catalytic ferrous iron of MFO (Modified Fenton's Oxidation) and has been studied for use in PRBs (Permeable Reactive Barriers) as a reactive material. Therefore, this study investigated the condition of optimization in MFO-PRBs using waste zero-valent iron (ZVI) with the waste steel scrap to treat MTBE contaminated groundwater. Batch tests were examined to find optimal molar ratio of MTBE : $H_2O_2$ on extent to degradation of MTBE in groundwater at pH 7 with 10% waste ZVI. As the results, the ratio of optimization of MTBE to hydrogen peroxide for MFO was determined to be 1:300[mM]. The column experiment was conducted to know applicability of MFO-PRBs for MTBE remediation in groundwater. As the results of column test, MTBE was removed 87% of the initial concentration during 120days of operational period. Interestingly, MTBE was degraded not only within waste ZVI column but also within sand column. It means the aquifer may affect continuously the MTBE contaminated groundwater after throughout the waste ZVI barrier. The residual products showed acetone, TBF (Tert-butyl formate) and TBA (Tert-butyl acetate) during this test. The results of the present study showed that the recycled materials can be effectively used for not only a source of catalytic ferrous iron but also a reactive material of the MFO-PRBs to remove MTBE in groundwater.

• Journal of Sericultural and Entomological Science
• /
• v.29 no.2
• /
• pp.51-57
• /
• 1987

The intent of this research is to acquire some basic informations about formulation of the viral pesticide, Hyphantria cunea nuclear polyhedrosis virus and its virulence under field condition. The nuclear polyhedrosis virus was formulated as wettable powder using spreader, sticker and U.V. protector. The formulated product and aqueous virus were diluted with water at the concentration of 1${\times}$106PIB/ml and sprayed on mulberry leaves in the field. The leaves were fed with 3rd instar larvae of H. cunea to determine the inactivation period of the viral pesticides. The aqueous virus was completely inactivated on 5th day after spray, while the formulated one showed a spare mortality to the larvae even on 20th day after spray. In field application test, The fromulated and aqueous virus were sprayed on individual mulberry tree and 3rd instar laevae of H. cunea were fed on the trees. The mortality of the larvae one day after spray of the formulated and aqueous virus were about 50% and 40%, respectively. The formulated virus exhibited a persistent virulence to the larvae up to 9th day after spray, which the mortality was approximately 30%. The residual virulence of the formulated and aqueous virus was extended up to 4th day and 2nd day after spray, respectively.

• Korean Journal of Materials Research
• /
• v.11 no.7
• /
• pp.609-614
• /
• 2001

This study was carried out to obtain a basic data on the production of the Nd-Fe-B system rare earth anisotropic bonded magnet by R-D & HDDR process. The reduction reaction of Nd$_2$O$_3$by metallic Ca and the diffusion reaction of Nd into Fe-B alloy powder were investigated for the production the Nd-Fe-B alloy powder. We concluded that a proper quantity of metallic Ca was about 1.3 times of theoretical equivalent from the yields of Nd and B after the R-D reaction at 100$0^{\circ}C$ for 1h. In the XRD analysis the diffusion reaction of Nd into the center of Fe-B alloy powder for the completed homogenization was required through about 45min at 110$0^{\circ}C$ for the R-D reaction, and also the maximum efficiency on the yield of Nd was obtained with such a condition. Residual Ca and oxygen contents of the final powder sample after washing were detected in 0.17wt% and 0.42wt% by ICP and oxygen analyzer, respectively.

• The Journal of Engineering Geology
• /
• v.21 no.3
• /
• pp.239-246
• /
• 2011

Upon encountering weathering soil at a construction site, it may be necessary to change the design and construction plans for geotechnical structures. When weathering soil is exposed to air, the weathering process proceeds rapidly, resulting in significant damage to geotechnical structures, particle defects, and an increase in moisture sensitivity. The management of weathering-soil compaction is challenging. Because the engineering properties of weathering-soils vary regionally, it is important to report the result of research into the regional characteristics of such soils. At two locations of granite gneiss in the Gansung area of Gangwon-do, geological studies were performed at 22 and 8 sites, respectively. At each site, test samples were collected for analysis by XRD and to measure particle size, consistency, and compaction. To evaluate the suitability of the material for road subgrade, we examined the interrelationship between CBR value and the uniformity coefficient, the 200 sieve passing ratio and the aggregate ${\geq}$ 2 mm) content. We found that for the weathered granite soil, aggregate sized > 2 mm has a significant effect on the CBR value. In addition, the mixing of aggregate sized > 2 mm with sub-quality soil improves the soil condition.

• Journal of Life Science
• /
• v.8 no.6
• /
• pp.627-637
• /
• 1998

In order to utilize tuna pyloric caeca among fish intestines wasted when treated raw fish in fish processing manufactory, a crude enzyme with high proteolytic activity was extracted and its optimum condition were investigated. An immobilized enzymes also were prepared by adsorption method to enhance thermostability of the crude proteinase. The yield of the crude proteinase was approximately 2.7% on dry basis. The proteolytic activity for casein was 0.54 U/mg protein, for BTEE 1.10 U/mg protein, and for BAEE 2.69 U/mg protein. It was almost similar to that of the commercial trypsin purified. Optimum hydrolysis activity of the crude proteinase was about 80%, as the degree of hydrolysis for casein, at pH 10.0 and 45$^{\circ}C$ for 12 hrs. Also, when the crude proteinase was immobilized on DEAE-Cellulose and chitin, the residual activities remained after 7 days of pre-incubation time were maintained about 90% or more and their thermostabilities were enhanced by about 50%, compared with the native enzyme.

• The Journal of Engineering Geology
• /
• v.26 no.4
• /
• pp.439-445
• /
• 2016

The new airports apply the systematic runway foundation construction to build the high quality runways in order to take the leading position to win future aerial demands and stay ahead of competitors. This study is intended to supplement the weakness of existing standard compaction test to minimize residual settlement of lower weak foundation during operation of passenger berthage. The fill material was sampled from 4 construction sites using the fill material with diameter of 100mm or less, and the standard compacting test (KS F 2312), large circular mold compacting test, and water-replacement field density test (ASTM D 5030) were conducted. The regression analysis of correlation of the field density test and the standard indoor compaction test showed the unreliable value at P-value of 0.05, and the regression analysis of the field density test and the large indoor compaction test showed the high correlation with R value of 0.8878. It is judged that the construction of overall uniform quality can be assured as the site condition is truly reflected only if the compacting test method is selected in consideration of maximum size of fill material when evaluating the maximum dry density used in design and construction.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.28 no.1
• /
• pp.65-72
• /
• 2020

The aims of this study were to compare the biomethanation of CO₂ through specific methanogenic activity (SMA) test which was inoculated with four different types of mixed microbial culture obtained from full-scale anaerobic digestion (AD) plants. The experimental results showed that CH₄ conversion was the highest in the samples inoculated by seed sludge taken from ADs of food waste and brewery; under this condition, the produced biomethane contains 89.3-91.9% of CH₄. Meanwhile, the lowest level was obtained in the sample from sewage sludge. The measured ratio of CH₄ production rate to CO₂ consumption rate in all reactors was higher than the theoretical value (1) in the middle of the period and soon dropped to 0.7-0.8. It might be due to changed metabolic pathways in the reactor by the degradation of residual organic matter and the increased activity of homoacetogenic bacteria.

• Journal of the Korean Applied Science and Technology
• /
• v.29 no.2
• /
• pp.323-329
• /
• 2012

Sesame oil has superior oxidation stability and unique roasting flavor. Accordingly, this has been used for edible oil as well as a seasoning material for a long time in Korea. But sesame oil is a simple pressed oil, unrefined. During manufacturing process of roasting-expression, benzo(a)pyrene[B(a)P] formed as a strong carcinogenic substance causes a social problem. Detection of B(a)P in sesame oil was due to residual content in raw-sesame seeds and formation in roasting-expressing process. Especially, maximal forming process was roasting. Accordingly, in this study applied the traditional roasting method by roaster and microwaving method as a new type. Best roasting time by microwaving was for 5~10 min, B(a)P content in sesame oil was 0.53~0.79 ${\mu}g/kg$. These B(a)P contents showed 1/2 level than direct roasting method by roaster. As a result, B(a)P contents in sesame oil appeared the difference of more than 2 times according to roasting condition of sesame seed. For minimizing of B(a)P content in sesame oil is demanded roasting of sesame by microwaving than direct roasting by roaster.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.10
• /
• pp.1035-1042
• /
• 2005

Granular Activated Carbon(GAC) is widely used in drinking water treatment. At S and B Water Treatment Plant, GAC is used in place of granular media in conventional rapid filters(GAC Filter-Adsorber) for removal of Disinfection By-products(DBPs). The primary focus of this study is on the performance of existing filter-adsorber, and their operation. It was found that F/A process removed turbidity as effective as sand system. The ratio of Hydrophobic DOM (HPO) and hydrophilic DOM (HPI) fraction in the raw water at S and B WTP was similar. Filter Adsorber presented earlier DOC breakthrough and steady state condition which was contributed by biodegradation during operation period. The removal efficiency of DBPs were used to evaluate the filter performance. The DBPs concentration of F/A treated water was below treatment goal level (THM < $80\;{\mu}g/L$, HAA < $60{\mu}g/L$). The removal efficiency of THM decreased rapidly during operation period. However, HAA were removed steadily regardless of the influent concentration of HAA. These results indicate that the removal of THM depend upon the adsorption mechanism while the removal of HAA depend upon biodegradation as well as adsorption. The decrease of adsorption capacity and characteristic value of GAC may be attributed to the effect of high organic loading, residual free chlorine, coagulants, manganese oxidants and frequently backwashing. This study has confirmed that Filter adsorber process can be considered as effective alternatives for the removal of DBPs, especially HAA.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.10
• /
• pp.709-716
• /
• 2011

Effect of inorganic coagulants dosing on the performance of electro-chemical process was studied when treating hospital wastewater having low electrolyte concentration. It is thought that adding inorganic coagulants caused increase in concentration of electrolyte and this caused increase in free chloride concentration and consequently, caused increase in indirect oxidation effect. Thus, COD removal efficiencies more than doubled in percentage terms at the 2 hrs of reaction time and current density of $1.76A/dm^2$ compared with the results obtained from the parallel experiments without adding inorganic coagulants. T-N removal efficiencies approximately doubled in percentage terms at the 2 hrs of reaction time and 700 ppm of coagulants addition and applied current density of $1.76A/dm^2$ due to the increase of free residual chlorine such as HOCl caused by increase of electrolyte concentration through the addition of inorganic coagulants. Under the same experimental condition, more than 90% of T-P removal efficiencies was obtained. The reason can be explained that increase of chemical adsorption rate between phosphate and insoluble metal compounds caused by dissolved oxygen generated from anode by the increased electrolyte concentration through inorganic coagulants addition make a major role in improving T-P removal efficiencies. It can be concluded that inorganic coagulants addition as the supplemental agent of electrolyte is effective way in improving organic and nutrient salt removal efficiency when treating hospital wastewater having low electrolyte concentration.