Journal of the Korean Society of Clothing and Textiles
/
v.29
no.12
s.148
/
pp.1595-1607
/
2005
Three-dimensional(3-D) body scanners used to capture anthropometric measurements are now becoming a common research tool far apparel. This study had two goals, to test the accuracy and reliability of 3-D measurements of dynamic postures, and !o analyze the change in upper body surface measurements between the standard anthropometric position and various dynamic positions. A comparison of body surface measurements using two different measuring methods, 3-D scan measurements using virtual tools on the computer screen and traditional manual measurements for a standard anthropometric posture and for a posture with shoulder flexion were $-2\~20mm$. Girth items showed some disagreement of values between the two methods. None of the measurements were significantly different except f3r the neckbase girth for any of the measuring methods or postures. Scan measurements of the upper body items showed significant linear surface change in the dynamic postures. Shoulder length, interscye front and back, and biacromion length were the items most affected in the dynamic postures. Changes of linear body surface were very similar for the two measuring methods within the same posture. The repeatability of data taken from the 3-D scans using virtual tools showed satisfactory results. Three times repeated scan measurements f3r the scapula protraction and scapula elevation posture were proven to be statistically the same for all measurement items. Measurements from automatic measuring software that measured the 3-D scan with no manual intervention were compared with the measurements using virtual tools. Many measurements from the automatic program were larger and showed quite different values.
This experiment was carried out to report some data such as survival rate, tetraploid production efficiency, and agronomic characteristics of offspring from the induced tetraploid by the colchicine treatment in rye. The colchicine was soaked with 0.05%, 12 hours in dark condition and at two growth stages (green seed and 2nd leaf stage) in diploid ryes. Flow cytometry (FC) was proved to be efficient and rapid tool for screening ploidy levels in rye, showing around 40 to 60 in DNA amount (DAP1) corresponding to diploid and 80 to 110 tetraploid. There were 18.5% of survival rate at green seed treatment and 78% at 2nd leaf stage in average of two rye cultivars, Gogu and Jogreen, but in reverse 50.9% and 1.1% in the ratio of tetraploid to total tillers among the plants survived, respectively, resulting in 9.42% of tetraploid production rate in green seed treatment and 0.86% at 2nd leaf stage, respectively. In green seed treatment, there were 33% of survival rate in Gogu, 4% in Jogreen in 1st year, but 56% in Gogu, 21% in Jogreen and 49% in Charmgreen, respectively. The rate of tetraploid to total spikes among survived was 53.7% in Gogu, 32.4% in Jogreen, and 50.9% in average in 1st year, and 64.1% in Gogu, 51.5% in Jogreen, 60% in Charmgreen, and 60.5% in average in 2nd year. In green seed treatment, tetraploid production rate (survival rate ${\times}$ tetraploid ratio ${\times}$ 100) was 17.7% in Gogu and 1.3% in Jogreen and 9.42% in average in 1st year, and 35.9% in Gogu, 10.8% in Jogreen, 29.4% in Charmgreen, and 25.4% in average of three diploid rye cultivars. By the colchicine treatment with 0.05% for 12 hours in Gogu and Jogreen, 35 tetraploid plants were obtained and they produced 2,673 seeds with 148 spikes. There were 3.3-4.4 in the number of spikes per plant, 15.6-18.3 in grain number per spike, and 37.6 g in Gogu and 46.8 g in Jogreen in the 1,000-grain weight.
A new design field called eDesign appears as if eBiz is an online related business in which an industrialized design creates the individual value added facing a digital revolution. The field of eDesign requires a special design process and management methodology regardless of the fact that human sensitivity will be satisfied through a dehumanized computer technique. However, it is the reality of eDesign that has been dependent upon a simple process or project management tool of general design. In this study, we develop an eDesign platform based on an eDesign process and template mainly focused on eBusiness in order to overcome the wrong situation. The template is a kind of document that has a standardization form. We aim to establish a general process through various case projects, store information using a necessary template, and use for the way of visual communication. We propose a standard of eDesign platform that can be widely applied to the field of design, medium and small enterprises focused on IT businesses or design-team through this project performed as an educational-industrial study. It makes it possible to get a detailed process methodology, which can be applied to many small design related companies that don't have their own process yet, and will be a scale for comparing their own process in which the company has a process of opened standard eDesign with it. In addition, it makes possible a systematic control of the own projects within and outside the firm, accumulating information for the firm through the database, and easy communication. Furthermore, it can be applied to check the process of the project as a checklist, and then it will reduce trial and error repeated for every project that has been done.
Park, Yang-Kyun;Ha, Sung-Whan;Ye, Sung-Joon;Cho, Woong;Park, Jong-Min;Park, Suk-Won;Huh, Soon-Nyung
Radiation Oncology Journal
/
v.24
no.4
/
pp.300-308
/
2006
$\underline{Purpose}$: To develop a wireless CCTV system in semi-beam's eye view (BEV) to monitor daily patient setup in radiation therapy. $\underline{Materials\;and\;Methods}$: In order to get patient images in semi-BEV, CCTV cameras are installed in a custom-made acrylic applicator below the treatment head of a linear accelerator. The images from the cameras are transmitted via radio frequency signal (${\sim}2.4\;GHz$ and 10 mW RF output). An expected problem with this system is radio frequency interference, which is solved utilizing RF shielding with Cu foils and median filtering software. The images are analyzed by our custom-made software. In the software, three anatomical landmarks in the patient surface are indicated by a user, then automatically the 3 dimensional structures are obtained and registered by utilizing a localization procedure consisting mainly of stereo matching algorithm and Gauss-Newton optimization. This algorithm is applied to phantom images to investigate the setup accuracy. Respiratory gating system is also researched with real-time image processing. A line-laser marker projected on a patient's surface is extracted by binary image processing and the breath pattern is calculated and displayed in real-time. $\underline{Results}$: More than 80% of the camera noises from the linear accelerator are eliminated by wrapping the camera with copper foils. The accuracy of the localization procedure is found to be on the order of $1.5{\pm}0.7\;mm$ with a point phantom and sub-millimeters and degrees with a custom-made head/neck phantom. With line-laser marker, real-time respiratory monitoring is possible in the delay time of ${\sim}0.17\;sec$. $\underline{Conclusion}$: The wireless CCTV camera system is the novel tool which can monitor daily patient setups. The feasibility of respiratory gating system with the wireless CCTV is hopeful.
To evaluate if the apoptotic fragment assay could be used to estimate the dose prediction after radiation exposure, we examined apoptotic mouse crypt cells per 1,000 cells after whole body $^{60}Co$$\gamma$-rays and 50MeV ($p{\rightarrow}Be^+$) cyclotron fast neutron irradiation in the range of 0.25 to 1 Gy, respectively. The incidence of apoptotic cell death rose steeply at very low doses up to 1 Gy, and radiation at all doses tigger rapid changes in crypt cells in stem cell region. These data suggest that apoptosis may play an important role in homeostasis of damaged radiosensitive target organ by removing damaged cells. The curve of dose-effect relationship for the data of apoptotic fragments was obtained by the linear-quadratic model $y=0.18+(9.728{\pm}0.887)D+(-4.727{\pm}1.033)D^2$ ($r^2=0.984$) after $\gamma$-rays irradiation, while $y=0.18+(5.125{\pm}0.601)D+(-2.652{\pm}0.7000)D^2$ ($r^2=0.970$) after neutrons in mice. The dose-response curves were linear-quadratic, and a significant dose-response relationship was found between the frequency of apoptotic cell and dose. These data show a trend towards increase of the numbers of apoptotic crypt cells with increasing dose. Both the time course and the radiation dose-response curve for high and low linear energy transfer (LET) radiation modalities were similar. The relative biological effectiveness (RBE) value for crypt cells was 2.072. In addition, there were significant peaks on apoptosis induction at 4 and 6h after irradiation, and the morpholoigcal findings of the irradiated groups were typical apoptotic fragments in crypt cells that were hardly observed in the control group. Thus, apoptosis in crypt cells could be a useful in vivo model for studying radio-protective drug sensitivity or screening test, microdosimetric indicator and radiation-induced target organ injury. Since the apoptotic fragment assay is simple, rapid and reproducible in the range of 0.25 to 1 Gy, it will also be a good tool for evaluating the dose response of radiation-induced organ damage in vivo and provide a potentially valuable biodosimetry for the early dose prediction after accidental exposure.
Kim, Young-Min;Mun, Ji-Seon;Park, Jung-Suk;Lim, Gil-Sun
Journal of The Korean Association For Science Education
/
v.30
no.8
/
pp.1002-1016
/
2010
The purpose of this study is to investigate beginner and experienced Korean science teachers' perceptions about the science teacher preparation courses from which they graduated, and to compare them. The study was conducted as a qualitative study using in-depth interviews. For the study, interview questions were developed by the authors based on the questionnaire of 'The IMPPACT project' that was being conducted in America. The interview tool includes questions about their experience of science subject matter content knowledge, science pedagogical content knowledge, and general pedagogical content knowledge in their preparation courses. For the interview, seven beginning science teachers, less than five years of teaching experience, and five experienced science teachers, more than five years of teaching experience, were sampled from secondary schools in Korea. The research results are as follows: First, most of the beginner and experienced science teachers perceived that the teaching methods in the classes of science subject matter were not good model for teaching science in their secondary school, because they were not diverse enough and entailed mostly knowledge transfer just through lecture without teacher-student interaction. Second, most of the beginner science teachers perceived that they were affected positively by the teaching strategies and evaluation methods in the classes for science pedagogical subject matter and they could apply those strategies and methods in their current science teaching. Lastly, most of the beginner and experienced science teachers perceived that general pedagogical subject matter is important and prerequisite for science teaching in their schools, but the courses that they experienced at their university were not appropriate for their current teaching.
in a software development, the design or architecture prior to implementing the software is essential for the success. This paper presents a case that we successfully designed a software architecture of radiation monitoring system (RMS) for HANARO research reactor currently operating in KAERI by applying the quality attribute-driven design method which is modified from the attribute-driven design (ADD) introduced by Bass[1]. The quality attribute-driven design method consists of following procedures: eliciting functionality and quality requirements of system as architecture drivers, selecting tactics to satisfy the drivers, determining architectures based on the tactics, and implementing and validating the architectures. The availability, maintainability, and interchangeability were elicited as duality requirements, hot-standby dual servers and weak-coupled modulization were selected as tactics, and client-server structure and object-oriented data processing structure were determined at architectures for the RMS. The architecture was implemented using Adroit which is a commercial off-the-shelf software tool and was validated based on performing the function-oriented testing. We found that the design method in this paper is an efficient method for a project which has constraints such as low budget and short period of development time. The architecture will be reused for the development of other RMS in KAERI. Further works are necessary to quantitatively evaluate the architecture.
Journal of the Korean Institute of Landscape Architecture
/
v.36
no.4
/
pp.83-99
/
2008
Images of Seong-Nam appears different according to diverse conditions. This study was intended to analyze the differences of cognition by personal characteristics such as age, gender, location, and period when an individual evaluates an urban image. This research focused on the interpretation of the visualized results from Multidimensional Scaling (MDS) and Individual Difference Scaling (INDSCAL) with two questionnaires. This study can be summarized as follows: 1. Namhan Sansung was ranked as the first symbolic property by citizens in Seong-Nam. Next was Yuldong Park, followed by Bundang Central Park, Seohyun Station including Samsung Plaza, and, finally, Moran Market. This trend also similarly appeared in the selection of preferred places. 2. There were no statistical differences in trends of choice of symbolic landmarks and preferred places according to age, gender, and period; however, there were meaningful differences according to location. 3. The total image of Seong-Nam was positioned to be separated from images of other districts and landmarks on the image spatial plot by MDS; however, images of the old and new district were plotted close to symbolic landmarks where located around each district. 4. INDSCAL illustrated that men weighted the historical meaning while women weighted preference and city size when evaluating an urban image. On the other hand, there was no difference in cognitive trends according to age, location, and period. Until now, an individual difference in the cognition and evaluation of an urban image was a socially accepted notion. However, this study verified the difference according to personal characteristics and developed a practical tool to analyze an individual cognition trend about a city image.
The perceived stress response inventory(PSRI) was developed to measure 4 types of current stress responses : emotional, somatic, cognitive, and behavioral responses. 242 patients with psychiatric disorders(71 patients with anxiety disorders, 73 patients with depressive disorders, 47 patients with somatoform disorders, 51 patients with psychosomatic disorders) and 215 healthy subjects completed the questionnaire including the PSRI. Global assessment of recent stress(GARS) scale, perceived stress questionnaire(PSQ) and symptom checklist-90-revised(SCL-90-R) were also administered at the same time. Factor analysis for each of 4 types of stress responses yielded 8 factors : negative emotional responses, general somatic symptoms, specific somatic symptoms, lowered cognitive function and general negative thinking, self-depreciative thinking, impulsive-aggressive thinking, passive-responsive and careless behavior, and impulsive-aggressive behavior. Both test-restest reliability(r= .83 -.93) and internal consistency(Cronbach's alpha : .79 -.96 for each of 8 subscales and .98 for total items of the scale) were all at statistically significant levels. Total scores of the PSRI significantly correlated with total scores of GARS scale, PSQ, and global indicies of SCL-90-R, respectively. The patient group had significantly higher scores than healthy subjects in each of all the subscales except impulsive-aggressive behavior subscale. These results suggest that the PSRI is a reliable and valid tool stable over time which may be effectively used for the research in stress-related field including psychosomatic medicine.
This study was performed to determine risk ranking of the combination of pathogen-livestock or livestock products to identify the most significant public health risks and to prioritize risk management strategies. First, we reviewed foodborne outbreak data related to livestock products and determined main vehicles and pathogens according to the number of outbreak and case. Second, expert's opinion about management priority of pathogen-livestock product pairing was surveyed with 19 livestock experts in the university, research center, and government agency. Lastly, we used the outcome of Risk Ranger (semi-quantitative risk ranking tool) of 14 combinations of pathogen and livestock or livestock products. We have classified the combination of pathogen-livestock products into group I (high risk), II (medium risk), and III (low risk) according to their risk levels and management priority. Group I, which is the highest risk for foodborne outbreak, includes Salmonella spp./egg and egg products, Campylobacter spp./poultry, pathogenic E. coli/meat and processed ground meat. In conclusion, the results of this study will provide the specific guideline of mid- and long-term planning for risk assessment and risk management prioritization of the combination of pathogen and livestock, or livestock product.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.