• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권1호
• /
• pp.96-99
• /
• 2014

In high-${\kappa}$/metal-gate (HK/MG) metal-oxide-semiconductor field-effect transistors (MOSFETs) at 45-nm and below, the metal-gate material consists of a number of grains with different grain orientations. Thus, Monte Carlo (MC) simulation of the threshold voltage ($V_{TH}$) variation caused by the workfunction variation (WFV) using a limited number of samples (i.e., approximately a few hundreds of samples) would be misleading. It is ideal to run the MC simulation using a statistically significant number of samples (>~$10^6$); however, it is expensive in terms of the computing requirement for reasonably estimating the WFV-induced $V_{TH}$ variation in the HK/MG MOSFETs. In this work, a simple matrix model is suggested to implement a computing-inexpensive approach to estimate the WFV-induced $V_{TH}$ variation. The suggested model has been verified by experimental data, and the amount of WFV-induced $V_{TH}$ variation, as well as the $V_{TH}$ lowering is revealed.

• Journal of Information Technology Applications and Management
• /
• 제24권3호
• /
• pp.73-92
• /
• 2017

Usability is one of the most important concepts regarding software quality. It can be interpreted as the goodness associated with using the software product. This paper distinguishes the goodness of an individual using experience and the goodness of a product for using. This paper proposes a software quality view model which classifies software quality views into two broad categories of end view and means view. End view includes long-term view and short-term view which is classified further into performer's view on software activity and third party's view on software activity. Means view includes intrinsic view and contingency view. The analysis of ISO 25000 Series SQuaRE demonstrates the necessity to decompose product quality model and quality in use model into five models corresponding to the software quality views respectively. The analysis on playability shows that the universal definition of usability may be an illusion. The results provide the theoretical basis to build a comprehensive and consistent body of knowledge regarding software quality, which is consisted with the set of quality models and the theories explaining the relationships among the elements of the models.

• 조명전기설비학회논문지
• /
• 제25권8호
• /
• pp.106-113
• /
• 2011

The conventional grounding impedance of a counterpoise is calculated as a function of the length of the counterpoise by use of the distributed parameter circuit model with an application of the EMTP(Electromagnetic Transient Program). The adequacy of the distributed parameter circuit model is examined and verified by comparison of the simulated and the measured results. The conventional grounding impedance of the counterpoise is analyzed for the first short stroke and subsequent short stroke currents. As a result, the simulated results show that the minimum conventional grounding impedance gives at a specified length of the counterpoise. The shorter the time taken to reach the peak of injected currents, the shorter the length of the counterpoise having the minimum conventional grounding impedance. We also present the critical lengths of the counterpoise for short stroke currents as a function of soil resistivity. Based on these results, it is necessary to compute the length of the counterpoise in a specified soil resistivity which satisfies both the low conventional grounding impedance requirement whilst also providing a suitable ground resistance in order to obtain an economical design and installation of the counterpoise.

• 한국정보통신학회논문지
• /
• 제19권11호
• /
• pp.2703-2709
• /
• 2015

IT 와 농업분야의 융합은 생산, 유통, 소비 분야에서의 효율과 질적 향상을 기대하게 되었고 특히 IT 영역의 정보 분석 기술과 자동제어 기술은 농산물 생산에 많은 장점을 제공하게 되었다. 네트워크 기반에서의 농업 분야 ICT확대는 기술적, 환경적인 측면에서의 어려움들을 해결하게 되었다. 본 논문에서는 IT와 접목한 스마트 농업 환경에서의 표준 기능 모델을 제안 분석하고 이를 바탕으로 한 스마트 농업에서의 기술적 서비스 요구조건 을 제시한다.

• Journal of Mechanical Science and Technology
• /
• 제20권6호
• /
• pp.864-873
• /
• 2006

As fuel cells approach commercialization, hydrogen production becomes a critical step in the overall energy conversion pathway. Reforming is a process that produces a hydrogen-rich gas from hydrocarbon fuels. Hydrogen production via autothermal reforming (ATR) is particularly attractive for applications that demand a quick start-up and response time in a compact size. However, further research is required to optimize the performance of autothermal reformers and accurate models of reactor performance must be developed and validated. The design includes the requirement of accommodating a wide range of experimental set ups. Factors considered in the design of the reformer are capability to use multiple fuels, ability to vary stoichiometry, precise temperature and pressure control, implementation of enhancement methods, capability to implement variable catalyst positions and catalyst arrangement, ability to monitor and change reactant mixing, and proper implementation of data acquisition. A model of the system was first developed in order to calculate flowrates, heating, space velocity, and other important parameters needed to select the hardware that comprises the reformer. Predicted performance will be compared to actual data once the reformer construction is completed. This comparison will quantify the accuracy of the model and should point to areas where further model development is required. The end result will be a research tool that allows engineers to optimize hydrogen production via autothermal reformation.

• Journal of Information Processing Systems
• /
• 제15권1호
• /
• pp.181-188
• /
• 2019

A production system is a management system that supports all activities to perform production operations at the manufacturing site. From the point-of-view of a smart factory, smart manufacturing systems redesigned the concept of onsite production systems to fit the entire system and its necessary functional composition. In this study, we select the key functions needed to build a smart factory for a PCB line and propose a new six-step model for the deployment of a smart manufacturing system by integrating essential functions. The smart manufacturing system newly classified the production and operation tasks of PCB manufacturing and selected necessary functions through requirement analysis and benchmarking of advanced companies. The selected production operation tasks are mapped to the functions of the system and configured into seven modules, and the optimal deployment model is presented to allow flexible responses to the characteristics of the tasks. These methodologies are first presented in this study, and the proposed model was applied to the PCB line to confirm that they had significant changes in the work method, qualitative effects, and quantitative effects. Typically, lead time and WIP have reduced by about 50%.

• 정보보호학회논문지
• /
• 제20권1호
• /
• pp.123-128
• /
• 2010

공격 시나리오의 그래프 표현은 서버의 취약성 분석 및 공격의 방어를 위한 설계에 필수적인 방법이다. 이를 위해 다양한 요구사항 분석 모델이 이용되고 있으나, 복잡한 시나리오간의 결합을 표현할 수 있는 모델은 제한적이다. 본 논문에서 제안하는 역할 기반 페트리 넷(Role Based Petri Net)은 동시성과 시각적인 장점을 가진 페트리 넷을 역할 기반으로 구성하여 효과적 표현 모델을 제공하고 알려지지 않은 공격에 대한 시나리오를 효율적으로 표현할 수 있다.

• 농업과학연구
• /
• 제48권2호
• /
• pp.311-331
• /
• 2021

Climate change with extreme hydrological events has become a significant concern for agricultural water systems. Climate change affects not only irrigation availability but also agricultural water requirement. In response, adaptation strategies with soft and hard options have been considered to mitigate the impacts from climate change. However, their implementation has become progressively challenging and complex due to the interconnected impacts of climate change with socio-economic change in agricultural circumstances, and this can generate more uncertainty and complexity in the adaptive management of the agricultural water systems. This study was carried out for the agricultural water supply system in Seongju dam watershed in Seonju-gun, Gyeongbuk in South Korea. The first step is to identify system disturbances. Climate variation and socio-economic components with historical and forecast data were investigated Then, as the second step, problematic trends of the critical performance were identified for the historical and future climate scenarios. As the third step, a system structure was built with a dynamic hypothesis (causal loop diagram) to understand Seongju water system features and interactions with multiple feedbacks across system components in water, agriculture, and socio-economic sectors related to the case study water system. Then, as the fourth step, a mathematical SD (system dynamics) model was developed based on the dynamic hypothesis, including sub-models related to dam reservoir, irrigation channel, irrigation demand, farming income, and labor force, and the fidelity of the SD model to the Seongju water system was checked.

• International Journal of Computer Science & Network Security
• /
• 제22권10호
• /
• pp.271-281
• /
• 2022

Manual seed classification challenges can be overcome using a reliable and autonomous seed purity identification and classification technique. It is a highly practical and commercially important requirement of the agricultural industry. Researchers can create a new data mining method with improved accuracy using current machine learning and artificial intelligence approaches. Seed classification can help with quality making, seed quality controller, and impurity identification. Seeds have traditionally been classified based on characteristics such as colour, shape, and texture. Generally, this is done by experts by visually examining each model, which is a very time-consuming and tedious task. This approach is simple to automate, making seed sorting far more efficient than manually inspecting them. Computer vision technologies based on machine learning (ML), symmetry, and, more specifically, convolutional neural networks (CNNs) have been widely used in related fields, resulting in greater labour efficiency in many cases. To sort a sample of 3000 seeds, KNN, SVM, CNN and CNN-SVM hybrid classification algorithms were used. A model that uses advanced deep learning techniques to categorise some well-known seeds is included in the proposed hybrid system. In most cases, the CNN-SVM model outperformed the comparable SVM and CNN models, demonstrating the effectiveness of utilising CNN-SVM to evaluate data. The findings of this research revealed that CNN-SVM could be used to analyse data with promising results. Future study should look into more seed kinds to expand the use of CNN-SVMs in data processing.

• Structural Engineering and Mechanics
• /
• 제81권3호
• /
• pp.379-394
• /
• 2022

Shallow footings usually belonged to the category of thick plate structures. For accurate analysis of thick plates, the contribution of out-of-plane components of the stress tensor should be considered in the formulation. Most of the available shallow footing models are based on the classical plate theories, which usually neglect the effects of the out-of-plane stresses. In this study, a mixed-field plate finite element model (FEM) is developed for the analysis of shallow footings rested on soil foundations. In addition to displacement field variables, the out-of-plane components of the stress tensor are also assumed as a priori unknown variables. For modeling the interaction effect of the soil under and outside of the shallow footings, the modified Vlasov theory is used. The tensionless nature of the supporting soil foundation is taken into account by adopting an incremental, iterative procedure. The equality requirement of displacements at the interface between the shallow footing and soil is fulfilled using the penalty approach. For validation of the present mixed FEM, the obtained results are compared with the results of 3D FEM and previous results published in the literature. The comparisons show the present mixed FEM is an efficient and accurate tool for solving the problems of shallow footings rested on subsoil.