• Journal of the Korean Society of Systems Engineering
• /
• v.10 no.1
• /
• pp.57-64
• /
• 2014

We propose a methodology to automatically extract the requirements from the documents and check the traceability between them. The documents include not only the text file but also PDF or image files. We also suggest a method to visualize the result with maps, numbers, and graphs. By comparing the results with those of expert reviews, we show that it is necessary to use knowledge-based method in future instead of the word-based method for improving the reliability. The results give more values when they are applied in already existing documents than those of newly developed product.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2001.09a
• /
• pp.423-430
• /
• 2001

This research was conducted to investigate the seismic behavior and ductility of circular spiral reinforcement concrete bridge columns used in high strength concrete. The experimental variables consisted of transverse steel amount and spacing, different axial load levels. From the test results, sufficient displacement ductility(at least 5.5) was observed for the columus which was satisfied wi th the requirement confinement steel amount of the Korean Bridge Design Specification. In case of the columns with 50 MPa of concrete compressive strength, the columns wi th 80 % of the confinement steel amount requirement showed adequate displacement ductility(at least 6.5) under 0.2 of axial load level. And in case of the columns with 60.2 77a of concrete compressive strength, the columns with 44 \ulcorner of the confinement steel requirement provided adequate displacement ductilit under less than 0.1 of axial load level and the columns with 0.22 % provided showed comparatively high the ducti1iffy under 0.21 of axial load level.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.601-602
• /
• 2006

The primary role of MRP(Material Requirement Planning) is to make a production plan so that we have an exact quantity of right materials on needed time at right place. But the ignorance on capacity constraints makes some problems whenever production schedule is established. To increase the performance of MRP system, a novel approach which is based on new input data structure is suggested. The new input data structure includes all the information about Material BOM, Routing and resource data so that we can easily examine the usage of resources and generate higher performance production plans.

• KIPS Transactions on Software and Data Engineering
• /
• v.4 no.12
• /
• pp.537-542
• /
• 2015

Project success is depend on requirement analysis for in the software engineering. Requirements error have a effect in the whole system. As a result, the customer satisfaction will deteriorate. Therefore, we are need to tool that stakeholder's opinion exchange and modify for a accurate analysis in the requirement phase. In this paper, we are design that tool of the stakeholder's opinion exchange.

• Journal of the Korean Society of Systems Engineering
• /
• v.18 no.2
• /
• pp.40-49
• /
• 2022

Remote-controlled and autonomous driving based on artificial intelligence are key elements required for unmanned combat vehicles. The required capability of such an unmanned combat vehicle should be expressed in reasonable required operational capability(ROC). To this end, in this paper, the requirements of an unmanned combat vehicle operated under a manned-unmanned teaming were analyzed. The functional requirements are remote operation and control, communication, sensor-based situational awareness, field environment recognition, autonomous return, vehicle tracking, collision prevention, fault diagnosis, and simultaneous localization and mapping. Remote-controlled and autonomous driving of unmanned combat vehicles could be achieved through the combination of these functional requirements. It is expected that the requirement analysis results presented in this study will be utilized to satisfy the military operational concept and provide reasonable technical indicators in the system development stage.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.14 no.24
• /
• pp.83-95
• /
• 1991

This paper investigate into practice industrial safety consciousness and requirement for the spot workers in engaged the metal industry. Industrial accident defines "unwanted event" happened unexpectedly in opposition to hope workers and industrial accident is being possible to prevent. The purpose of this paper is to present a basic data for preventing and deceasing industrial accident from the spot works system by means of the improvement of worker's own safety consciousness and analyzing the spot worker's requirement in industrial safety.al safety.

• Journal of Biosystems Engineering
• /
• v.9 no.2
• /
• pp.27-36
• /
• 1984

This study was carried out to investigate the effects of the tilling depth, tilling travel speed and soil shear stress on the tilling load characteristics and power requirement for rotary tillers. The results obtained from the study are summarized as follows. 1. The average and maximum PTO torque increased as the tilling depth, tilling pitch and soil shear stress increased. A multiple linear regression equation to estimate the average PTO torque in terms of the above parameters was developed. 2. The ratios of maximum PTO torque to the average torque were in the range of 1.17 to 1.65 for the various tilling conditions tested. The variation in PTO torque increased greatly as the tilling pitch and soil shear stress increased, but decreased as the tilling depth increased. 3. Power requirement for the PTO shaft increased with the tilling depth, travel speed and soil shear stress, but decreased slightly as the tilling pitch increased. A multiple linear regression equation to estimate power requirement for the PTO shaft in terms of the above parameters was developed. 4. The specific power requirement for the rotary tiller was in the range of $0.008-0.015ps/cm^2$ for the various tilling conditons tested. The specific tilling capacity decreased as the tilling depth and soil shear stress increased, but increased with the tilling pitch. A multiple linear regression equation to estimate the specific tilling capacity in terms of the above parameters was developed.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.6
• /
• pp.1535-1547
• /
• 2016

This paper proposes various design procedures for computing Power System Ancillary Service Requirement Assessment Indices (PSASRAI) for a Two-Area Thermal Reheat Interconnected Power System (TATRIPS) in a restructured environment. In an interconnected power system, a sudden load perturbation in any area causes the deviation of frequencies of all the areas and also in the tie-line powers. This has to be corrected to ensure the generation and distribution of electric power companies to ensure good quality. A simple Proportional and Integral (PI) controllers have wide usages in controlling the Load Frequency Control (LFC) problems. So the design of the PI controller gains for the restructured power system are obtained using Bacterial Foraging Optimization (BFO) algorithm. From the simulation results, the PSASRAI are calculated based on the settling time and peak over shoot concept of control input deviations of each area for different possible transactions. These Indices are useful for system operator to prepare the power system restoration plans. Moreover, the LFC loop coordinated with Redox Flow Batteries (RFB) has greatly improved the dynamic response and it reduces the control input requirements and to ensure improved PSASRAI, thereby improving the system reliability.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.7
• /
• pp.57-67
• /
• 2013

This study suggests for effective operation of systematic analysis method for human factors which is based on the requirement architecture framework a requirement process to manage requirements for improvement is discussed, such as in requirements generation, database construction, management of experimental design, and management of the design traceability. For the objectives, we analyzed the method construct of the starting point views of user requirement which is adopted the requirement architecture concept to cover the whole activities required to do and the human factors guidelines and standards are suggested for verification and validation of the develop requirements. It is getting more attention as the operation of the enabling systems goes up these days. Throughout the propose of this study, human factors requirement database design presented in operational environment system for enabling system which is based on case study using a computer aided se tool. This study will be contributed to how the operational requirement database for the enabling system and operational human factors can be constructed in an integrated system design fashion.

• Journal of the Korean Society for Railway
• /
• v.9 no.4 s.35
• /
• pp.482-486
• /
• 2006

The Systems Engineering Management Plan (SEMP) is the primary, top level technical management document for the integration of all engineering activities at the project plan phase. This document defined the activities to plan, control, and perform overall engineering integration. To develop the SEMP for Railway Safety System, several standards are reviewed and analyzed. And then a common requirement for SEMP preparation is derived from the results of analysis. Also, the SEMP example available practically applies to Railway Safety System. In particular, The SEMP focused on controling technical program management has been organized so far, but in this study the detailed contents of SEMP put stress on project management is derived. And it is related to each other between project management and technical engineering management. At the end, to continuously manage the items and contents of the SEMP, a database management and an automatic document generation system is presented using Computer-Aided Systems Engineering (CASE) tool.