• Journal of the Institute of Convergence Signal Processing
• /
• v.14 no.2
• /
• pp.105-109
• /
• 2013

There are the free space model, the direct-path and ground reflected model, Egli model, Okumura-Hata model in the representative propagational models. The measured results at the area of PNG area were used as the experimental data in this paper. The new proposed partial interval analysis method is applied on the measured propagation data in the cellular band. The interval for the analysis is divided from the entire 30 Km distance to 5 Km, and next to 1 Km. The best-fit propagation models are chosen on all partial intervals. The means and standard deviations are calculated for the differences between the measured data and all partial interval models. By using the 5 Km- or 1 Km- partial interval analysis, the standard deviation between the measured data and the partial propagation models was improved more than 1.7 dB.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.700-707
• /
• 2008

As plan connecting island to island or island to land is needed, a lot of long-span bridge is being designed lately in Southern part of Korea. With development of pile equipment, overhanging large-scaled concrete pile are adopted to foundation type of main tower or pylon. About the number of 15~30 group piles per tower foundation is designed to resist long-spaning super-structure load, but by restricted condition of site investigation cost, a few boring-hole tests are performed to identify sub-ground layers. Up to now, direct-curved method connecting two or three known boring logs and representative interval method are usually used to evaluate unknown depth and rock properties at locations where piles are constructed. Because this approach is not logical and so rough, much difference occurs between designed length of piles and real length of it. In this paper, using a lot of various prediction method(reciprocal distance method, inverse square distance method and kriging method etc.), we suggest optimum length of group piles.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1169-1175
• /
• 2008

The validation technique is classified with two methods whether to demand of additional experimental points. The method which requires additional experimental points such as RSME is actually impossible in engineering field. Therefore, the method which only use experimented points such as the cross validation technique is only available. But the cross validation not only requires considerable computational costs for generating metamodel each iterations, but also cannot measure quantitatively the fidelity of metamodel. In this research we propose a new validation technique for representative metamodels using an variance of metamodel and confidence interval information. The proposed validation technique computes confidence intervals using a variance information from the metamodel. This technique will have influence on choosing the accurate metamodel, constructing ensemble of each metamodels and advancing effectively sequential sampling technique.

• MALSORI
• /
• no.56
• /
• pp.147-158
• /
• 2005

In this paper, we are focused to develop the simplified speaker verification algorithm without background speaker models, which will be adopted in the portable speaker verification system equipped in portable terminals such as mobile phone and PMP. According to the tolerance interval analysis, the population of someone's speaker model can be represented by a suitable number of selected independent samples of speaker model. So we can make the representative speaker model and threshold under the specified confidence level and coverage. Using proposed algorithm with the number of samples is 40, the experiments show that the false rejection rate is $3.0\%$ and the false acceptance rate $4.3\%$, worth comparing to conventional method's results, $5.4\%\;and\;5.5\%$, respectively. Next step of research will be on the suitable adaptation methods to overcome speech variation problems due to aging effect and operating environments.

• Proceedings of the Korea Association of Information Systems Conference
• /
• 1996.11a
• /
• pp.205-210
• /
• 1996

The bootstrap procedure is suggested as a useful method for point and interval estimation of system availability. Its validity and robustness has been shown in special, but representative case, by various sampling experiments. Alternative to the bootstrap suggest themselves e.g. a variation of the 'F'technique, but remain to be evaluated, as do variations on the bootstrap itself.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 1996.10a
• /
• pp.205-210
• /
• 1996

The bootstrap procedure is suggested as a useful method for point and interval estimation of system availability . Its validity and robustness has been shown in special , but representative case, by various sampling experiments. Alternative to the bootstrap suggest themselves (e.g. a variation of the 'F' technique, but remain to be evaluated, as do variations on the bootstrap itself.

• Proceedings of the IEEK Conference
• /
• 2003.07c
• /
• pp.2879-2882
• /
• 2003

Obstructive Sleep Apnea(OSA) is a representative symptom of sleep disorder which is caused by airway obstruction. OSA is usually diagnosed through the laboratory based Polysomnography(PSG) which is uncomfortable and expensive. In this paper, the detection method for OSA events, using ECG, has been developed. The proposed method uses the ECG data sets provided from Physionet. The features for OSA events detection are the average and standard deviation of 1 minute R-R interval, power spectrum of R-R interval and S-pulse amplitude from data sets. These features are applied to the input of Neural Network. To evaluate the method, we used the another ECG data sets. And we achieved sensitivity of 89.66％, specificity of 95.25％. So, we can know that the features proposed in this paper are important to detect OSA.

• Journal of Korean Society of Transportation
• /
• v.23 no.3 s.81
• /
• pp.109-123
• /
• 2005

The goals of this paper are two folds: i) to evaluate whether the data collected by a license plate matching AVI equipment being operated on some segment of a national highway are suitable or not for use in travel time estimation of interrupted traffic flows; ii) to study the statistical methodologies to be used for the determination of the optimal aggregation interval for travel time estimation. In this study it was found that the AVI data are not representative because the data are collected on some selected lanes of a roadway where main traffic is thru-traffic and, thus the AVI data are different from those collected from all lanes in traffic characteristics. For the determination of the optimal aggregation interval for travel time estimation. two statistical methods. namely point estimation and interval estimation. were tested. The test shows that the point estimation method is more sensitive and gives more desirable results in determing the optimal aggregation interval than the interval estimation method. And it turned out that the optimal aggregation interval on interrupted traffic flows has been calculated as 5 minute and thus the existing aggregation interval. 5 minute is proper.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.8 s.145
• /
• pp.1102-1113
• /
• 2005

The propose of this study is to develop the optimal sizing system of ready-to-wear f3r elementary school girls using a newly invented statistical technique. The body measurements was classified by the method that equalizes the distribution of the subjects using the probability density function, to theoretically systemize a method to determine a size range of ready-to-wear for elementary school girls between 6 to 12 years old. The statistical method were 1) The total of 11 height groups, which size interval from one another is 6 cm that is an average height gap between each age. 2) In order to determine an approximate figure (m ${\times}$ n) to establish the appropriate sizes far each height group that fit to the combinations of bust and hip girth, which based on their means and standard deviations on the probability density curve to produce the standard normal distribution. 3) m and n were aligned by 4cm -the grading increments used for patterns making- and determined the size ranges by confirming the approximate figures of m and n. 4) The representative values were determined by an area ratio calculated by dividing the area determined from the range of bust and hip girth with the representative value. Considering the characteristics of subjects' distribution, the area ratios was used. 5) Weight was calculated by seeking a growth exponent for each age and multiplying it by the number of girls that fit to each size range. As sections that show the highest weight are more likely sought by the consumers, these sections were determined as the optimal size standards. 6) This optimal sizing system consists of sizes determined by the optimal size standards and its sizes are marked with height, bust and hip girth.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.50 no.6
• /
• pp.276-280
• /
• 2001

This paper presents the result of a study on the distribution characteristics of salt contaminants in the west coast region, from Inchon to Yearsoo, of South Korea. To evaluate the distribution characteristics of salt contaminants, we had measured the equivalent salt deposit density(ESDD) with brush wiping method for thirteen month(from May 1999 to June 2000). Under the consideration on the measuring interval and method, normalization method was applied for the ESDD data. Besides the measurement, the chemical analysis (chromatography) was carried to investigate the relationship, between the electrical property and the amount of specific ingredient, such as sodium, magnesium and chloride. From the result, we could get the representative value of contamination for each site and distribution characteristics of salt contaminants with the distance from sea in the west coast.