• 동력기계공학회지
• /
• 제20권4호
• /
• pp.5-11
• /
• 2016

This study analyzed the damage to a slitting knife after cutting steel sheets. Damages to the structure were observed and wear tests were conducted. In addition, the degradation on the damaged and undamaged parts was compared with a micro Vickers hardness test. Weibull statistical analysis was carried out in order to evaluate the reliability of the micro Vickers hardness measured data. Spalling of the edge portion occurred by degradation during use over a long period. Rough parts in the specimens were caused by damage because the slitting knife was used for 1 year. The friction coefficient and wear loss at the damaged parts of the knife edge were slightly larger from shock due to repetitive cutting operation. The micro Vickers hardness followed a two-parameter Weibull probability distribution.

• 한국산업안전학회:학술대회논문집
• /
• 한국안전학회 1997년도 추계 학술논문발표회 논문집
• /
• pp.157-164
• /
• 1997

Construction accident happens all of the process in work and contains materials types of causes. Especially, temporary work material in the great problem in industrial accident. Because temporary work In essential to build the main structure. The most frequent type of accident by the temporary work is the falling and so on. Its causes were the failure of scaffolding, imperfection of temporary material etc. These accident properties the Primitive and repetitive accident. The prevention counterplan of construction accident by temporary material work in need to protect worker and make more safer construction site. Therefore in this paper analyzed of the serious accident of construction by the temporary work material and present reasonable solution method to reduce the construction accident by the temporary work material.

• 전기학회논문지P
• /
• 제66권4호
• /
• pp.247-251
• /
• 2017

This paper proposes a low power transmission technique for single-carrier modulation with frequency domain equalization. As time domain signals and frequency domain signals have unique corresponding functions, inserting zeros after each symbol causes a repetition in other domain, so maximal ratio combining technique using repetitive transmission can be applied in the frequency domain. In this paper, we configure transmit signals to insert zeros after each symbols for single-carrier modulation with frequency domain equalization and maximal ratio receive combining block in the receiver structures, propose a structure for transmitter and receiver and show that its performance is better than the traditional algorithm by simulations.

• The Journal of Korean Physical Therapy
• /
• 제19권5호
• /
• pp.51-63
• /
• 2007

Diabetic foot ulcers result from abnormal mechanical loading of the foot, such as repetitive pressure applied to the plantar aspect of the foot while walking. Diabetic peripheral neuropathy causes changes in foot structure, affecting foot function and subsequently leading to increased plantar foot pressure, which is a predictive risk factor for the development of diabetic foot ulceration. To early identify the insensitive foot makes it possible to prevent diabetic foot ulceration and to protect the foot at risk from abnormal biomechanical loading. Abnormal foot pressures can be reduced using several different approaches, including callus debridement, prescription of special footwear, foot orthosis. injection of liquid silicone, Achilles tendon lengthening, and so forth. Off-loading of the diabetic wound is a key factor to successful wound healing as it is associated with reduced inflammatory and accelerated repair processes. Pressure relief can be achieved using various off-loading modalities including accommodative dressing, walking splints, ankle-foot orthosis, total contact cast, and removable and irremovable cast walkers.

• Smart Structures and Systems
• /
• 제18권4호
• /
• pp.733-754
• /
• 2016

Structural optimization involves a large number of structural analyses. When optimizing large structures, these analyses require a considerable amount of computational time and effort. However, there are specific types of structure for which the results of the analysis can be achieved in a much simpler and quicker way thanks to their special repetitive patterns. In this paper, frequency constraint optimization of cyclically repeated space trusses is considered. An efficient technique is used to decompose the large initial eigenproblem into several smaller ones and thus to decrease the required computational time significantly. Some examples are presented in order to illustrate the efficiency of the presented method.

• 한국CDE학회논문집
• /
• 제4권1호
• /
• pp.1-11
• /
• 1999

surface texture denotes set of tiny repetitive geometric features on an object surface. 3D Printing can readily create a surface of controlled macro-textures of high geometric complexity. Designing surface textures for 3D Printing, however, is difficult due to complex macro-structure of the tiny texture geometry since it needs to be compatible with the non-traditioal manufacturing method. In this paper we propose a visual simulation technique involving development of a virtual model-an intermediate geometric model-of the surface texture design prior to fabricating the physical model. Careful examination of the virtual model before the actual fabrication can help minimize unwanted design iterations. The proposed technique demonstrated visualization capability by comparing the virtual model with the physical model for several test cases.

• 전자공학회논문지B
• /
• 제32B권12호
• /
• pp.1581-1590
• /
• 1995

Recently, advanced video coding techniques using segmentation technique have been actively researched as candidates for video coding of MPEG-4 standard. The conventional segmentation techniques are unsuitable for real-time process because they have sequential structure. In this paper, we propose a new image segmentation technique using competitive learning neural network for vector quantization. The proposed segmentation procedure consist of prefiltering, primary and secondary segmentation, and a small region ellimination process. Primary segmentation segments input image in detail. Secondary segmentation merges similar region using a repetitive FSCL(Frequency sensitive competive learning) neural network. In this process, it is possible to segment an image from high resolution to low resolution by adjusting the number of repetition. Finally, small regions are merged into adjacent regions. Experimental results show that the procedure described yields reconstructed images of reasonably acceptable quality at bit rates of 0. 25 - 0.3 bit/pel.

• 한국철도학회논문집
• /
• 제9권5호
• /
• pp.577-581
• /
• 2006

Urban transit operation corporations perform repetitive work to investigate the EMU, electric multiple unit, by some fixed maintenance cycle. The quality of maintenance work usually depends on workers' know-how. Though some information to support the maintenance work is digitalized and provided to workers, it is not great help to them because of its non systematic structure. The information includes drawings, manuals, work results, work history, fault history, etc. The maintenance workers want to access the information anytime anywhere, and make an effect to promote the efficiency of maintenance for EMU. But it is difficult to achieve that without some structured information system which is able to use in work area. So we develop maintenance information system for EMU for about 4 years from 2002 to 2005. In this paper we present the configuration and characteristics of this system, and the results of the evaluation test. We install the system in two depots, Changdong and Jichuk, belonged to SeoulMetro to evaluate its efficiency and estimate its economic benefits.

• 한국콘텐츠학회논문지
• /
• 제5권5호
• /
• pp.33-42
• /
• 2005

본 논문에서는 ART 신경회로망의 성능을 개선하기 위해, 불필요한 클러스터의 생성과 변화를 억제하여 효율적인 패턴 분류가 가능하도록 하는 학습 알고리즘을 제안한다. 또한, 패턴 분류의 정확성을 향상시키기 위해 한글의 구조적 특징을 이용한 위치추출 알고리즘을 적용하였다. 제안하는 학습 알고리즘은 현재 학습되는 패턴과 최초 패턴간의 일치도를 비교한 후 리세트 시스템을 작동케 한다. 그 결과, 신경회로 망은 이미 입력되었던 패턴이 다시 입력되어도 새로운 클러스터의 생성을 방지하여 오인식율을 줄이게 된다.

• 한국표면공학회지
• /
• 제51권1호
• /
• pp.21-26
• /
• 2018

The $Cu_2(btc)_3$ metal-organic frameworks (MOF) coated anodic aluminum oxide (AAO) membrane was successfully prepared by layer-by-layer technique using hand spray method. It was confirmed that the $Cu_2(btc)_3$ layer, which has the pore sized in 2-3 nm, on surface of AAO exhibited the polycrystalline thin film structure by XRD analysis. More than 100 repetitive spray cycles were required to obtain more robust and thick MOFs on AAO and it was possible to uniformly coat both the top and bottom surfaces of the AAO. It should be noted that the MOFs also could be coated on surface of pores resulting in reduce the size of pore from 52 nm to 32 nm.