DOI QR코드

DOI QR Code

The effect of wear on the damage of slitting knife

Slitting Knife의 손상에 미치는 마모의 영향

  • Nam, Ki-Woo (Department of Materials Science and Engineering, Pukyong National University) ;
  • Kim, Cheol-Soo (UR Interdisciplinary Program of Mechanical Engineering, Pukyong National University) ;
  • Ahn, Seok-Hwan (Department of Mechatronics, Jungwon University)
  • 남기우 (부경대학교 재료공학과) ;
  • 김철수 (부경대학교 학연협동기계공학) ;
  • 안석환 (중원대학교 메카트로닉스학과)
  • Received : 2016.01.24
  • Accepted : 2016.07.20
  • Published : 2016.08.31

Abstract

This study analyzed the damage to a slitting knife after cutting steel sheets. Damages to the structure were observed and wear tests were conducted. In addition, the degradation on the damaged and undamaged parts was compared with a micro Vickers hardness test. Weibull statistical analysis was carried out in order to evaluate the reliability of the micro Vickers hardness measured data. Spalling of the edge portion occurred by degradation during use over a long period. Rough parts in the specimens were caused by damage because the slitting knife was used for 1 year. The friction coefficient and wear loss at the damaged parts of the knife edge were slightly larger from shock due to repetitive cutting operation. The micro Vickers hardness followed a two-parameter Weibull probability distribution.

Keywords

References

  1. K. T. Kim and Y. S. Kim, 2007, "Effects of Counterpart Materials on Wear Behavior of Thermally Sprayed Ni-based Self-flux Alloy Coatings", Journal of The Korean Society for Power System Engineering, Vol. 11, No. 4, pp. 92-97.
  2. http://www.swhitech.com/main/
  3. JIS G 4105
  4. W. S. Cho, 2009, Martensitic Transformation and Mechanical Property of Abrasive Resistance Alloys with Heat Treatment Conditions, A doctor's Thesis, Chosun University, Jeonnam, Korea.
  5. K. T. Han and J. K. Seo, 2001, "A Study on the Slitting Working by Finite Element Analysis", Journal of The Korean Society for Power System Engineering, Vol. 5, No. 3, pp. 56-63.
  6. H. Puls, F. Klocke and D. Lung, 2014, "Experimental Investigation on Friction under Metal Cutting Conditions", Wear, Vol. 310, Issues 1-2, 15, pp. 63-71. https://doi.org/10.1016/j.wear.2013.12.020
  7. K. W. Nam and S. H. Ahn, 2012, Fatigue Fracture and Damage Cases of Surface Hardening Treatment Steel, GS Intervision, Seoul, Korea.
  8. A. C. Cohen, 1965, "Maximum Likelihood Estimation in the Weibull Distribution Based on Complete and on Censored Samples", Technometrics, Vol. 7, pp. 579-588. https://doi.org/10.1080/00401706.1965.10490300
  9. W. Weibull, 1951, "A Statistical Distribution Function of Wide Applicability", ASME J. Applied Mech., Vol. 18, pp. 293-297.
  10. K. W. Nam, S. J. Kim and D. S. Kim, 2015, "Weibull Statistical Analysis on Mechanical Properties in $ZrO_2$ with SiC Additive", Transactions of the KSME A, Vol. 39, No. 9, pp. 901-907. https://doi.org/10.3795/KSME-A.2015.39.9.901
  11. G. Straffelinia, P. C. Vermaa, I. Metinozb, R. Ciudina, G. Perriconeb, and S. Gialanellaa, 2016, "Wear Behavior of a Low Metallic Friction Material Dry Sliding against a Cast Iron Disc: Role of the Heat-Treatment of the Disc", Wear, Vols. 348-349, No. 15, pp. 10-16. https://doi.org/10.1016/j.wear.2015.11.020
  12. J.C. Miranda and A. Ramalho, 2015, "Study of the Effects of Damage Accumulation on War", Wear, Vols. 330-331, pp. 79-84. https://doi.org/10.1016/j.wear.2014.12.023
  13. P. Hedenqvist and M. Olsson, 1991, "Sliding Wear Testing of Coated Cutting Tool Materials", Tribol. Int., Vol. 24, pp. 143-150. https://doi.org/10.1016/0301-679X(91)90020-A
  14. M.E. Merchant, 1945, "Mechanics of the Metal Cutting Process. I. Orthogonal Cutting and A Type 2 Chip", J. Appl. Phys., Vol. 16, pp. 267-275 https://doi.org/10.1063/1.1707586
  15. H. J. Kim, J. D. Kim, S. W. Koh and Y. S. Kim, 2009, "Impact and Wear Behavior of Side Plate of FRP Ship", Journal of The Korean Society for Power System Engineering, Vol. 13, No. 6, pp. 123-128.
  16. I. Ucun, K. Aslanta and F. Bedir, 2013, "An Experimental Investigation of the Effect of Coating Material on Tool Wear in Micro Milling of Inconel 718 Super Alloy", Wear, Vol. 300, Issues 1-2, pp. 8-19. https://doi.org/10.1016/j.wear.2013.01.103