• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.394-397
• /
• 2008

Recently WiBro network is installed for high speed wireless internet service by telecommunication service provider, however WiBro service is not provided in the region of mountain or difficult region to install network infra. Fixed repeater is used to resolve those shadow area problem in current WiBro network. This paper study introducing Ad-hoc based multi-hop relay instead of using fixed repeater in order to resolve those shadow area problem. Cost down of fixed repeater and active network expansion is possible to resolve shadow area problem by introducing multi-hop relay technology.

• Journal of Broadcast Engineering
• /
• v.14 no.4
• /
• pp.518-536
• /
• 2009

To verify the performance of a Distributed Translator Network(DTxR) system in the real world conditions, 5 legacy DTV broadcasting repeater sites were implemented with 5 DTxR systems and field-tested by the DTV field test truck. The 4 DTV broadcasting repeater sites are selected in congested areas where their service areas are overlapped and the 5th site is deviated from the other sites to examine the effect of long-delayed multipath signals. First of all, we checked the receiving signal of the main station that used as a transmitting signal in 5 DTxR systems on the pre-selected 60 test points and tested every case of a DTxR system's on & off except 1 repeater site due to the already built-in DTV repeater system. The test items are received signal electric field strength, noise margin, ease of reception and subjective evaluation of the picture quality for received signals. We used 3rd, 5th, and 6th generation DTV receivers to examine the differences of the receivability by each generation of DTV receivers. Reviewing the test results, we conclude that the DTxR system can be adopted in the current DTV Repeater sites and it could improve the quality and receivability of the main signals by extending the service areas and enhancing the signal levels in the shadow areas without using the extra broadcasting channels.

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.329-332
• /
• 2000

In this paper, we made 5W 2stage power amplifier for IMT-2000 repeater. We designed this amplifier by harmonic balanced simulation using nonlinear model to minimize distortion. After simulation, we acquired 47㏈m 1㏈ compression point at 2110 ~ 2170MHz single tone input. In addition, the ACPR of this amplifier was good. The test result was 47㏈m 1㏈ compression point, 42.6㏈ gain, -36.16㏈c ACPR at 2.5MHz, -44.34㏈c ACPR at 5MHz and -51.67㏈c ACPR at 7.5MHz.

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.393-396
• /
• 2000

Repeater Duplexer of 800MHz band consists of 4pole transmitter band pass filter, receiver band pass filter and branch circuit. Circuit parameter of Duplexer such as coupled capacitance of equivalent circuit was drawn out and used to coupled line characteristics impedance (Zoo, Zoe) that satisfied resonator condition and attenuation condition. Simulation was carried out by the ADS(Advanced Design System) were obtained good attenuation characteristics (869~894MHz： 65㏈(Min.),824~349MHz： 65㏈(Min.)

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.307-308
• /
• 2008

In this paper, we propose a mitigation method to reduce the effect of pilot interference at the wireless repeater. This improves the signal to interference ratio (SIR), and enables increased cell capacity and better bits error rates (BER) performance in the WCDMA systems. Simulation studies have been carried out to verify the proposed approach and we obtained promising results.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.3
• /
• pp.239-246
• /
• 2013

In this paper, a dual-band on-body antenna operating at MICS and ISM band for a wireless medical repeater system is proposed and the antenna performance including the human body effect is investigated. The designed dual-band antenna is comprised of a top patch for ISM band and bottom patch for MICS band. Simulation and measurement was carried out in order to analyze the effects of human body on antenna performance considering real use. The proposed antenna has required impedance bandwidth enough to cover both MICS and ISM bands. The measured peak gains were -12.47 dBi and 1.71 dBi at the each center frequency of MICS and ISM bands, respectively. Furthermore, the antenna has the maximum radiation directed toward the inside of the human body in the MICS band and directed toward the outside in the ISM band. In addition, the return loss property of the antenna is insensitive to human body effects so that the proposed antenna is well suited for the on-body wireless medical repeater system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.3
• /
• pp.314-319
• /
• 2012

In this paper, a repeater antenna operating at MICS and ISM bands is proposed and the antenna performance including the human body effect is investigated. The proposed antenna is composed of a ZOR(Zeroth Order Resonator) and a loop antenna. A loop antenna is operated at ISM band and a loop antenna capacitively coupled with a ZOR acts as an antenna for MICS band. Simulation was carried out in order to analyze the effects of human body on antenna performance when a human body is located in the near field of an antenna. According to the simulated and measured results, the proposed antenna has -10 dB $S_{11}$ bandwidth wide enough to cover both MICS and ISM bands. The measured peak gains are -28.53 dBi and 3.85 dBi at MICS and ISM band, respectively. The dual band and radiation properties of the proposed antenna are well suited for the WBAN repeater system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.5
• /
• pp.867-873
• /
• 2016

Even if ICS(Interference Cancellation System) repeater is used in wireless communication system, it has the disadvantage that it must have enough distance between Donor and Service antenna to be isolated. In this paper, new ICS repeater integrated antenna with high insolation characteristics is designed. The proposed antenna is fabricated for 800MHz and measured. Bandwidth and gain are optimized by changing the stub lengths near main patch and power divider, and also by changing the size of parasitic patch. The fabricated antenna has a return loss less than -13 dB, a gain over 3 dBi, and an isolation between the donor and the server antennas less than -56 dB from 824~894 MHz for CDMA mobile communication. Therefore, the proposed antenna structure can be applied to eliminate the shadow area and to expand the coverage area for any other wireless communication bands.

• Journal of Broadcast Engineering
• /
• v.11 no.2 s.31
• /
• pp.229-241
• /
• 2006

In this paper we propose and analyze a novel modulation and pre-equalization method to minimize signal processing time delay for the Equalization Digital On-Channel Repeater (EDOCR) in ATSC (Advanced Television Systems Committee) terrestrial digital TV system. The proposed modulation method uses Equi-Ripple (ER) filter coefficients instead of conventional Square Root Raised Cosine (SRRC) after coefficients for VSB (Vestigial Side Bands) pulse shaping. And the proposed pre-equalization method calculates pre-equalizer filter coefficients by using baseband signal as reference signal and demodulated repeater output signal, then generates a new VSB pulse shaping filter coefficients by convolutioning ER filter coefficients and pre-equalizer filter coefficients. The newly generated pulse shaping filter does not have minimized time delay by adjusting the number of pre-taps of the filter, but also compensates linear distortions caused by ER filter and mask filter.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.5
• /
• pp.515-522
• /
• 2008

In this paper, a slot antenna with built-in Bazooka balun aimed for a WiBro repeater was designed and fabricated. The return loss and radiation pattern of the slot antenna were improved due to the introduced Bazooka balun. This balun brings about even radiation pattern and keeps the stabilized coverage of repeater And it is easy to unite this balun with the antenna body by providing the terminal of Bazooka balun with screw shape. H-type slot was used to reduce the size of the antenna, and the slot antenna was fabricated in the structural symmetry with respect to a feeding point to afford the omni-directional radiation pattern. The simulated results were obtained by MWS(Microwave Studio Simulator) of CST company, and the measurement on the proposed antenna was conducted in an anechoic chamber equipped with a network analyzer and a far field measurement system. The measured peak gain shows 5.75 dBi and the average gain is above -0.8 dBi. The return loss remains below -12.35 dB for all frequency bands in WiBro regarded as a good performance.