• Journal of Applied Reliability
• /
• v.14 no.3
• /
• pp.182-190
• /
• 2014

This paper presents new practical accelerated life test plans with different censoring times at three levels of stress for Weibull and lognormal lifetime distributions, respectively. The proposed plans are compared with the corresponding two-level statistically optimal plans and three-level compromise and practical plans. Computational results indicate that new practical plans have been more precise and effective than the existing three-level plans under a constraint of total testing time. In addition, a procedure to determine useful ALT plans is illustrated with a numerical example.

• Journal of Korean Society for Quality Management
• /
• v.40 no.2
• /
• pp.117-125
• /
• 2012

For the highly reliable products, an accelerated degradation test (ADT) is a useful tool which has been employed in industry to obtain reliability-related information within an affordable amount of time and cost. In an ADT, as all other reliability tests, it is important to carefully design the ADT beforehand to obtain estimates of the quantities of interest as precisely as possible. In this paper, optimal ADTs are developed assuming that the constant-stress loading method is employed and the degradation characteristic follows a Wiener process. Under the constraint that the total cost does not exceed a pre-specified budget, the stress levels, the number of test units allocated to each stress level and the number of measurement (termination time) are determined such that the asymptotic variance of the maximum likelihood estimator of the q-th quantile of the lifetime distribution at the use condition is minimized.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.4
• /
• pp.766-770
• /
• 2011

In this paper, we describe the failure analysis and representation test method that applied high frequency transformer for SMPS through analysing insulation resistance, frequency characteristic, CT analysis, Q-factor atc. And we study the judgement method that a high frequency transformer affects to other beside parts in different condition or environment. According to this method, we devise a plan for the field failure prevent and propose the securing product reliability of high frequency transformer.

• Journal of the Korea Safety Management & Science
• /
• v.6 no.2
• /
• pp.103-114
• /
• 2004

IEC 60300 series, the international standards on reliability management system are newly developed and introduced rapidly worldwide. In order to meet this fast-changing situation, it is necessary to apply them to the Korean industries effectively. It includes the establishment of the infrastructure such as documentation of Korean Standards, introduction of test equipments and test manuals, accreditation of the certification bodies and training of the specialists etc. IEC 60300 is upgraded management system of the ISO 9000 and ISO 14000. In this regard, the Korean companies which were certified with the ISO 9000 or 14000 should endeavor to find new strategies and methods to be certified with IEC 60300. This paper introduces a Quantitative method of estimating the level of the reliability management system by applying the MIR(Maturity Index on Reliability) technique. This enables the estimation of the operation level of the system and can upgrade the maturity level of it.

• Proceedings of the KIEE Conference
• /
• 2008.05a
• /
• pp.133-134
• /
• 2008

This paper describes a testing method to assess the reliability of the epoxy bushing used for the vacuum circuit breaker(VCB). Especially, in order to show the long-term durability of epoxy bushing in a short testing duration, the extremely accelerated electric stress applying test plan was adopted.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1657-1659
• /
• 2005

Test track of the Light Rail Transit(LRT system was developed and organically combined with technologies of power supply system, signal communication system and track structure The purpose of the test track is a acquiring of reliability and stability through a sufficient performance test Therefore, this paper draws up ail management plans for tests of the LRT system

• Industry Promotion Research
• /
• v.8 no.1
• /
• pp.111-117
• /
• 2023

Sampling inspection methods for quality control have been proposed a lot in the industry. However, the sampling inspection method for reliability, which is a quality over time, has been relatively less presented, and there are not many literatures that are clearly summarized. Therefore, this paper focuses on the reliability conformity test to verify that the reliability evaluation scale value of the target is satisfied during the reliability test. To this end, first, we look at the conditions that both consumers and producers can satisfy in terms of the OC curve and find out what sampling methods satisfy the desired level of producer risk and consumer risk. Next, two methods of the reliability sampling methods such as attribute and variable reliability sampling methods are examined. Specifically, the attribute reliability sampling method is a form of sampling plan where n samples are tested for a certain period of T hours and the lot is accepted if the number of failures is less than or equal to a certain number c. On the other hand, the variable reliability sampling method is a form of sampling plan where the lot is accepted if the reliability evaluation scale such as MTBF satisfies a certain standard. Both sampling plans may also use inspection tables.

• Corrosion Science and Technology
• /
• v.11 no.4
• /
• pp.129-134
• /
• 2012

UT(Ultrasonic Test), one of the non-destructive tests, is the most common thickness measurement method for evaluating the wear rate in NPPs(Nuclear Power Plants). UT is used widely because it is easy and safe for use. However some amount of error inevitably occurs in attempting to measure the thickness. The error, that could make the thickness data thicker or thinner, may affect estimation of wear rate in pipes. NPPs are composed of a lot of pipes and components. Some of them are tested to check the current status during RFO(Re-Fueling Outage). Reliability analysis of UT is essential for evaluating pipe wear rate and establishing the long-term management plan in NPPs. This paper reviewed the cause of error occurrence and presented the UT data reliability analysis method. Also, this paper shows the application result of reliability analysis to the UT data acquired in NPPs.

• Physical Therapy Korea
• /
• v.17 no.4
• /
• pp.55-60
• /
• 2010

Clinical measures that Quantify falling risk factors are needed for the accurate evaluation of patients and to plan an intervention strategy. The purpose of this study was to examine the test-retest and interrater reliability of the dynamic gait index (DGI) for persons with Parkinson's disease (PD). A total of 22 idiopathic PD patients were recruited from rehabilitation hospital, Korea in this study. The DGI was assessed in two sessions that were, three days apart. We also measured Berg balance test (BBT) and geriatric depression scale (GDS) for concurrent validity with DGI. Intrarater and interrater reliability (.96 and .98 respectively) for DGI were high. indicating good agreement. The DGI was showed a good positive correlation with the BBS (r=.852). but not GDS (r=-.462). Intrarater and interrater reliability of DGI were high in people with PD. The DGI could be a reliable measure to evaluate functional postural control during gait activities in the PD population, and the ability of DGI to detect real change is acceptable in research and clinical settings.

• Journal of Korean Society for Quality Management
• /
• v.49 no.3
• /
• pp.341-358
• /
• 2021

Purpose: After product development, a Reliability Demonstration Test(RDT) is performed to confirm that the target life has been achieved. In the RDT, there are cases where the test equipment cannot accommodate all samples. Therefore, this study considers a test method to most economically demonstrate the target life of the product at a certain confidence level when the sample size is larger than the capacity of the test equipment. Methods: If the sample size is larger than the capacity of the test equipment, test equipments may be added or the test time of individual samples may be increased. So the test method is designed to cover this situation with limited capacity. A zero-failure test method is applied as a test method to RDT. To minimize the cost, the test cost is defined and the cost function is obtained. Finally, we obtain the optimal test plan. Results: A zero-failure test method is designed when the sample size is larger than the capacity of the test equipment, and the expected total cost is derived. In addition, the process of calculating the appropriate sample size, test time, and number of test equipment is illustrated through an example, and the effects of model parameters to the optimal solutions are investigated numerically. Conclusion: In this paper, we study a zero-failure RDT with test equipment that has limited capacity. The expected total cost is derived and the optimal sample size, test time, and number of test equipment are determined to minimize the expected total cost. We also studied numerical examples and for further studies, we can relax some restrictions in the test model and optimize the test method.