• Journal of Applied Reliability
• /
• v.12 no.1
• /
• pp.47-56
• /
• 2012

Reliability demonstration tests with zero-failure acceptance criterion are most commonly used in the field of reliability application since they require fewer test samples and less test time compared to other test methods that guarantee the same reliability with a given confidence level. For products with lognormal lifetime distribution, an economic zero-failure test plan is developed that minimizes the total cost related to perform a life test to guarantee a specified reliability of a product with a given confidence level. A numerical example is provided to illustrate the use of the proposed test plan.

• Journal of the Korean Society of Physical Medicine
• /
• v.12 no.3
• /
• pp.49-58
• /
• 2017

PURPOSE: To summarize the evaluation tools of balance [Berg Balance Scale (BBS), timed up and Go (TUG), forward reaching test (FRT)], gait [6 m walking Test (6MWT)], and strength [Chair Stand Test (CST)] for patients with dementia. METHODS: The following databases were searched: Pub MED, Cochrane, Sciences Direct, and Web of Sciences. The inclusion criteria were as follows: 1) repeated measurement design, 2) subjects with dementia, 3) use of testing tools such as the BBS, TUG, FRT, 6MWT, and CST, 4) report the reliability. One reviewer performed the quality assessment of diagnostic accuracy study and two evaluators performed data extraction independently. RESULTS: Six articles and one letter were included. The interrater reliability of 6MWT, TUG, and CST, were acceptable (ICC>.90). However, FRT had unacceptable reliability. In test-retest reliability, only BBS has acceptable reliability (ICC>.90). Others had various reliabilities. The risk of interrater reliability bias was low in all studies. However, the risk of bias of intrarater reliability was low in five studies and moderate in two studies. CONCLUSION: The interrater reliability of the 6MWT, TUG, and CST were acceptable. However, in test-retest reliability, only BBS has acceptable reliability. Therefore, we suggest the use of BBS to test the balance of dementia patients. In addition, the study of tool reliability according to the subtype of dementia is needed in the future.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.3
• /
• pp.1002-1008
• /
• 2014

This paper describes insulation design and its reliability evaluation of ${\pm}80kV$ HVDC XLPE cable. Recently, the construction of HVDC transmission system, which is combined overhead line with underground cable, has been completed. This system is installed with existing 154 kV AC transmission line on the same tower. In this paper, the lightning transient analysis is firstly reviewed for selection of basic impulse insulation level and nominal insulation thickness. Then the electrical performance tests including load cycle test and superimposed impulse test based on CIGRE TB 496 are performed to evaluate the reliability of newly designed HVDC cable. There is no breakdown for ${\pm}80kV$ HVDC XLPE cable during electrical performance test. Finally, this system is installed in Jeju island based on successful electrical performance test (Type test). After installation tests are also successfully completed.

• Journal of Korean Society for Quality Management
• /
• v.39 no.1
• /
• pp.71-77
• /
• 2011

In the fields of reliability application, the most commonly used test methods for reliability qualification are zero failure tests since they require fewer test samples and less test time compared to other test methods that guarantee the same reliability with a given confidence level. An economic zero failure test plan is developed that minimizes the total cost related to perform a life test to guarantee a specified reliability of a product with a given confidence level and a numerical example is provided to illustrate the use of the proposed test method.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.1
• /
• pp.125-131
• /
• 2021

For the vibration reliability tests, the jigs for mounting the test specimen on a vibration reliability tester are required. The dynamic stabilities of the jigs should be verified before the tests for obtaining the accurate reliability of the test specimen. This paper proposes an analytical technology for ensuring the dynamic structural stability for the test setup including the jig. The technology includes the mode analyses for checking resonance, the harmonic analyses for evaluating the dynamic structural stability of test setup including the jig, and the fatigue analyses for obtaining the durable reliability time with calculating the life cycles at the area of weakness. The cause investigation of the damaged jig during vibration reliability test of a rubber hose and the design of new revised jig are performed by using the technology. The vibration reliability test for the rubber hose with the new revised jig by analysis results is successfully conducted without any problem. Therefore the jig's design technology proposed in this paper may be useful for other items as well.

• International Journal of Reliability and Applications
• /
• v.6 no.1
• /
• pp.31-39
• /
• 2005

An economic life test sampling plan for products with exponential lifetime distribution is developed. To reduce test time, a test plan with curtailed Type II censoring is considered. A cost model is constructed which involves three cost components; test cost, accept cost, and reject cost. Determination of optimal plan minimizing the expected average cost per lot is discussed with a constraint related to consumer's risk. Some numerical examples are provided.

• Proceedings of the KSR Conference
• /
• 2009.05b
• /
• pp.577-581
• /
• 2009

The fixed duration test has been widely used in the reliability demonstration test for rolling stocks. This article deals with how to design the test statistics, acceptance criteria and the fixed duration of the MTBF(Mean Time Between Failures) demonstration test considering the consumer risk. Numerical examples are given to illustrate the dependence of the consumer risk on the test duration and MTBF requirement.

• Journal of Applied Reliability
• /
• v.9 no.1
• /
• pp.47-58
• /
• 2009

In this paper, an accelerated life test procedure for a vacuum cleaner motor is proposed. We investigate the failure mechanism of the motor and select some accelerating factors and determine the orifice size as a key accelerating factor. Three stress levels of orifice size are tested and the failure data with censored data are analyzed. The modified accelerating test will reduce the test time in design phase by using the accelerating factor.

• Journal of Korean Institute of Industrial Engineers
• /
• v.28 no.4
• /
• pp.407-414
• /
• 2002

The inherent reliability of a product is primarily determined in the design stage, and therefore, design engineers should be able to design reliability into the product in an efficient manner. Especially, the product should be designed such that its reliability is robust to various noise factors encountered in production and field environments. The Taguchi method can be effectively used for this purpose. However, there exist only a few attempts to integrate the Taguchi method with reliability design, and in addition, the existing works do not sufficiently consider the robustness and/or the distinction between noise and acceleration factors. This paper develops a unified approach to robust reliability design assuming that accelerated life tests are conducted at each combination of design and noise conditions. First, an experimental structure for assigning not only acceleration but also noise factors is presented. Second, the reliability at the use condition is estimated using the assumed accelerated life test model. Third, reliabilities are transformed into 'efforts' using an effort function which reflects the degree of difficulty involved in improving the reliability. Finally, an optimal setting of design parameters is determined based on the mean and standard deviation of the effort values. The above approach is illustrated with an example of a paper feeder design.

• Journal of Applied Reliability
• /
• v.9 no.2
• /
• pp.107-119
• /
• 2009

Reliability tests should be designed to verify whether reliability requirements are satisfied or not effectively and efficiently. The portion of reliability requirements that a reliability test scheme composed of different types of tests can cover is defined as test coverage in software engineering. For the cases of hardwares, to be effective, a reliability test scheme should enhance the test coverage. This study is to develop an evaluation method of test coverage for a reliability test scheme proposed for new products. Case studies are also given.