• International Journal of Precision Engineering and Manufacturing
• /
• v.5 no.4
• /
• pp.61-68
• /
• 2004

Necessity to address engineering system uncertainties in design processes has long been acknowledged. To obtain quality of product, a safety factor is traditionally used by many design engineers due to its easy of use and comprehension. However, the safety factor approach often yields either conservative or unreliable designs, since it ignores the type of probability distribution and the mechanism of uncertainty propagation from the input to the output. For a consistent reliability-based design, two fundamental issues must be investigated thoroughly. First, the design-decision process that clearly identifies a mechanism of uncertainty propagation under system uncertainties needs to be developed, which must be an efficient and accurate process. To identify the mechanism more effectively, an adaptive probability analysis is proposed by adaptively setting probability levels through a posteriori error estimation. The second is to develop the design process that not only yields a high quality design but also a cost-effective optimum design from manufacturing point of view. As a result, a response surface methodology is specially developed for RBDO, thus enhancing numerical challenges of efficiency and complicatedness. Side crashworthiness application is used to demonstrate the integrated design process for product and manufacturing process design.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.7B
• /
• pp.744-750
• /
• 2009

In this paper, the unified Markov modeling of hardware and software for AVTMR(AlI Voting Triple Modular Redundancy) system is proposed and the dependability is analyzed. In hardware case, a failure rate is fixed to no time varying parameter. But, in software case, failure rate is applied with time varying parameter. Especially, the dependability(Reliability, Availability, Maintainability, Safety) of software is analyzed with G-O/NHPP for Markov modeling. The dependability of single and AVTMR system is analyzed and simulated with a unified Markov modeling method, and the characteristic of each system is compared accroding to failure rate. This kind of fault tolerat system can be applied to an airplane and life critical system to meet the requirement for a specific requirement.

• Korean Journal of Clinical Laboratory Science
• /
• v.42 no.1
• /
• pp.16-21
• /
• 2010

It has been well known that organic industrial solvents such as toluene, xylene and styrene are environmental health hazards causing occupational diseases to workers. The detection of biological metabolites of toluene, xylene and styrene in blood, urine, breast milk, saliva, and hair of workers exposed to these organic industrial solvents is a useful tool for assessing the amount of organic industrial solvents. Therefor, the external analytical quality assurance program is extremely important work for increasing reliability of the data analyzed in the special health examination laboratory. We evaluated the results of analysis by Korean analytical quality assurance program from the second half 2007 to the first half 2009. The number of participants for analytical quality assurance program for both mandatory item and one of optional items, hippuric acid and methylhippuric acid were 116-122, 116-122 and 105-115 laboratories, respectively. The proficient rate of the special health examination laboratories analyzed both mandatory item and optional item, hippuric acid and methylhippuric acid were 92-98%, 92-98% and 96-98%, respectively. We can conclude from our data that the analytical quality assurance program is a essential tool for improvement of reliability on the data analyzed in the special health examination laboratories.

• Journal of the Korean Society of Systems Engineering
• /
• v.17 no.2
• /
• pp.129-138
• /
• 2021

Today, as the number of vehicles equipped with autonomous driving functions increases, the use of various sensors increases, and the complexity of system configuration increases. The ISO 26262 standard was published to prevent caused by systematic errors. Recently, the issue of external environmental factors rather than mechanical failure has increased. This issue is a problem outside of the scope of ISO 26262, and the ISO/DIS 21448 standard was published to solve this problem. Also, Mobileye proposed the RSS model that defined safe distance for dangerous situations in order to secure the safety of autonomous vehicles and who is responsible in case of an accident. In this paper, integrated process of ISO 21448 and RSS model, and through these results, we expect that possible to contribute to securing the safety and reliability of autonomous vehicles in the future.

• Journal of the Korea Safety Management & Science
• /
• v.25 no.4
• /
• pp.35-43
• /
• 2023

In recent years, there has been a growing trend of occupational accidents involving foreign workers. As the number of foreign workers continues to increase, the risk of occupational accidents is also on the rise. Therefore, it is crucial to take proactive measures to prevent occupational accidents among foreign workers. To establish a common safety culture among foreign workers with varied backgrounds and educational experiences, and which is harmonized with Korean workplace. Safety communication, which includes culture respect and participation in the workplace, plays a significant role in shaping and developing the safety culture of foreign workers. Therefore, this study aims to assess the level of safety culture in workplace employing foreign workers by analyzing the reliability and validity of factors such as 'occupational accident awareness' and 'safety communication,' which constitute the safety culture at these workplace. Additionally, the mediating effect of 'work proficiency' on the relationship between 'safety communication' and the level of improvement in 'occupational accident awareness' using the validation method proposed by Baron & Kenny(1986). As a result of statistical analysis, The influence of'safety communication'on'occupational accident awareness'is 𝛽=0.339, and it has been found that this influence decreases to 𝛽=0.113 when'work proficiency'is introduced, indicating partial mediation.

• Journal of the Korea Safety Management & Science
• /
• v.7 no.4
• /
• pp.141-163
• /
• 2005

The international SPICE (Software Process Improvement and Capability determination) Project ISO/IEC 15504(SPICE : Software Process Improvement and Capability determination) is an emerging International Standard on SPA(Software Process Assessment). A prime motivation for developing this standard has been the perceived need for an internationally recognized software process assessment framework that pulls together the existing public and proprietary models and methods. A SPICE assessment can be considered as one of representative SPA model since assessors assign ratings to indicators and metrics to measure the capability of software process. But this models doesn't provide a systematic measurement procedures and dynamic method for SPI(Software Process Improvement). Through the evaluation of SPICE is capable of providing a substantiated basis for using the notion of capability, as well as providing information for nacessary improvements to the standard using 6sigma process. As a result, this paper propose a measurement procedure and guidelines for application of 6sigma process to guarantee the reliability in SPI and suggest the structure to support SPI on overall organization.

• Journal of the Ergonomics Society of Korea
• /
• v.33 no.1
• /
• pp.1-14
• /
• 2014

Objective: The purpose of this study is to select the methodology for SMR HRA which has characteristics that are different from existing nuclear power plants and digital-based plants. Background: We must assure safety to preoccupy export of technology to developing countries or countries interested in nuclear application. And we can be an advanced country in nuclear technology by securing original technology in the field of SMR such as SMART. Method: THERP, which is the most representative HRA methodology among all, and RARA, which is the latest HRA methodology. This study compared and evaluated THERP and RARA. Results: As a result of applying THERP and RARA methodologies which are based on LOCA EOG task analysis result, this research concluded that RARA has higher personal errors than THERP. Conclusion: This study needs validation for LOCA, emergency operations, normal and abnormal scenarios since HRA methodology was only focused on LOCA scenario. Application: The results of this study can apply as base line data when designing MMIS, which is the main control room of SMART, and when building a simulator.

• Journal of the Korean Society of Safety
• /
• v.29 no.1
• /
• pp.7-14
• /
• 2014

Inverter module, which feeds the converted power to the traction motor for EMU. Consists of the power semiconductors with their gate drive unit(GDU)s and the control computer for driving, voltage, current and speed controls. Electrolytic condenser, connected to the gate drive unit and a core component to drive the power semiconductor, has problems such as reduction in lifetime and malfunction caused by electrical and mechanical characteristic changes from heat generation during high speed switching for generation of stable power. In this study, To check the service life of electrolytic condenser, the test was carried out in two ways. First, In the case of accelerated life testing of condenser, the Arrhenius model is a way of life testing. Another way is to analyze the reliability of the failure data by the method of parametric data analysis. Eventually, life time by accelerated life test than a method of failure data analysis(Weibull distribution) was found to be slightly larger output.

• Journal of the Korean Society of Safety
• /
• v.21 no.3 s.75
• /
• pp.31-37
• /
• 2006

To apply easily the K-RBI program in domestic industries, an implemental procedure for K-RBI program was prepared. The K-RBI program had been developed, based on API-581 BRD. Therefore, through the usage of the developed K-RBI program and the implemental procedure, industries would have a benefit from reduced costs by modifying a frequency of an inspection efficiently. Also, the reliability of facilities would be maximized through improvement of an inspection method for facilities, considering its risk.

• Journal of Auto-vehicle Safety Association
• /
• v.8 no.1
• /
• pp.26-30
• /
• 2016

The steel road wheel on ventilation holes was cracked in the vehicle durability test. But the component durability test by uni-axial, CFT(Cornering Fatigue Test) and RFT(Radial Fatigue Test) had been satisfied. That is, the uni-axial component test could not forecast the crack of vehicle. Therefore this study developed the bi-axial test mode to reflect a vehicle condition(to reflect both vertical and lateral force simultaneously) based on real load data which was measured in Europe and China and developed CAE simulation too. It reproduced the cracks same as vehicle's and verified by bi-axial test machine in the LBF(Fraunhofer Institute for Structural Durability and System Reliability) durability research center in Germany. Finally this the durability CAE simulation by using HMC(Hyundai Motor Company)'s the bi-axial test mode predicts feasibly the steel wheel's durability performance before vehicle durability test.