• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.463-466
• /
• 2005

As the distributed generation becomes more reliable and economically feasible, it is expected that a higher application of the distributed generation units would be interconnected to the existing grids. This new generation technology is linked to a large number of factors like economics and performance, safety and reliability, market regulations, environmental issues, or grid connection constrains. KEPOD (Korea Electric Power Corporation) is performing the project to develope the Distributed Micro Gas Turbine (MGT) technologies by using Swine BID-ENERGY. This paper describes the plans and strategies for the renewable energy of MGT on actual grid-connection under Korean situations. KEPOD also, has a research plan on bio-gas pretreatment system applicable to our domestic swine renewable resources and is performing concept design of pilot plant to test grid operation. In addition, this testing will be conducted in order to respond to a wide variety of needs for application and economic evaluation in the field of On-site generation.

• Current Industrial and Technological Trends in Aerospace
• /
• v.7 no.2
• /
• pp.106-114
• /
• 2009

Until now, The Market of aviation parts had led by OEM(Original Equipment Manufacturer) parts because of aviation industry's nature required higher reliability and safety. But recently, The interest about PMA parts in aviation market is increasing continuously with various environmental changes, such as economic stagnation, oil price rise, development of the manufacture technique and newly rising market of Asia-Pacific region. Actually, after 2006, FAA PMA approval parts are increasing at a rate of around 40,000 parts per year and 2.5% of PMA parts penetration, in 2007, in Asia-Pacific market is forecast to enlarge up to 8% in 2017. So, this paper introduces the process requirements of FAA PMA / EASA EPA and the status of PMA market in order to enhance understanding for certification for aviation parts and to review a new PMA market.

• International Journal of Concrete Structures and Materials
• /
• v.5 no.2
• /
• pp.87-96
• /
• 2011

Many studies have been performed on steel fiber-reinforced normal/high-strength concrete (SFRC, SFRHC) for years, which is to improve some of the weak material properties of concrete. Most of equations for material strengths of SFRHC, however, were proposed based on relatively limited test results. In this research, therefore, the material test results of SFR(H)C were extensively collected from literature, and material tests have conducted on SFR(H)C; compressive strength tests, splitting tensile tests, and modulus of rupture tests. Based on the extensive test data obtained from previous studies and this research, a database of SFR(H)C material strengths has been established, and improved equations for material strengths of SFR(H)C were also proposed. Test results showed that both the splitting tensile strength and the modulus of rupture of SFR(H)C increased as the volume fraction of steel fiber increased, while the effect of the steel fiber volume fraction on the compressive strength of SFR(H)C were not clearly observed. The proposed equations for the splitting tensile strength and the modulus of rupture of SFR(H)C showed better results than the previous equations examined in this study in terms of not only accuracy but also safety/reliability.

• Journal of the Korea Computer Industry Society
• /
• v.2 no.8
• /
• pp.1133-1138
• /
• 2001

In this paper, we implemented that MMT(Multimedia Terminal) demonstrates spot news, weather forecast, sports news and cultural news employed CDMA mobile communication networks. The MMT displays mobile pictures/joint pictures/on screen ad and to make known Bus stop or Mobile stations. The MMT gives driver's and passenger's safety and valuable information for one's use GPS satellites. We verified to make real time mobile picture transfer use of CDMA2000 1×(IS-95C) network and development the scheduler control each module. This system tested on vehicle that train and bus. MMT was implemented high reliability and stability by the embedded system. The mobile terminal shows reliable data transfer rate about 74Kbps on IS-95C.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.2
• /
• pp.215-221
• /
• 2009

In recent, there has been progressed in various ways of research and development about a ubiquitous telemetry reading, but several problems are arising the reliability of reading value, power supply and so on. These issues were solved by using the RF module and digital pulse meter with photocoupler. Realized by this study, a telemetry reading system, utilizing RF and CDMA telecommunication, and check in real time the state of water leakage by managing the distinct usage data. In addition, the users can check it in person, and it can minimize the public enmities. Further, as a part of the silver industry fur constantly growing senior population, it might be introduced as safety supervision system.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.65 no.4
• /
• pp.340-345
• /
• 2016

Railway vehicle battery is supplying the power required for the initial start-up of the train, in the event of a fault in the vehicle, or catenary for supplying emergency power is one of the components are very important. Currently, the railway vehicles such as nickel-cadmium batteries are being used [1,2]. Ni-Cd batteries as a battery installed in the railway vehicles have a strong corrosion resistance is included, The charge-discharge performance is significantly degraded in cold weather, there is a danger of deterioration or explosion. Train accidents have been caused a lot of damage due to rapid deterioration and cracking of the battery and memory due to the effect of Ni-Cd batteries. In order to solve the problems, There is no risk of degradation, deterioration and leakage, cracking and exploding. maintenance is simple and applied measures proposed to apply Lithium Polymer battery of high performance. In addition, the lack of capacity problems identified by testing the different special systems is replaced by a 70Ah lithium-polymer battery is possible without changing the batteries of 50Ah caused by installing additional equipment in existing older trains were applied to the vehicle.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.585-588
• /
• 2007

As the distributed generation becomes more reliable and economically feasible, it is expected that a higher application of the distributed generation units would be interconnected to the existing grids. This new generation technology is linked to a large number of factors like economics and performance, safety and reliability, market regulations, environmental issues, or grid connection constrains. KEPCO (Korea Electric Power Corporation) is performing the project to develope the Distributed Micro Gas Turbine (MGT) technolgies by using Swine BIO-ENERGY. This paper describes the plans and strategies for the renewable energy of MGT on actual grid-connection under Korean situations. KEPCO also, has a research plan on bio-gas pretreatment system applicable to our domestic swine renewable resources and is performing concept design of pilot plant to test grid operation. In addition, this testing will be conducted in order to respond to a wide variety of needs for application and economic evaluation in the field of On-site generation.

• Journal of Satellite, Information and Communications
• /
• v.10 no.1
• /
• pp.29-32
• /
• 2015

It has been a big trend of the convergence technologies about communication systems and vehicular industry to improve safety and convenience. To achieve a number of infotainment vehicular applications, vehicles should transmit information with high reliability. A robust and accurate channel estimation scheme is of great importance to achieve the goal. In this paper, we present a novel enhanced decision-directed channel estimation scheme called FADP (Frequency Averaging Data Pilot) for dynamic time-varying vehicular channels in IEEE 802.11p. We use linear averaging filtering in frequency domain, and utilize the correlation characteristic of the channels between the adjacent two data symbols, update the CR in time domain to get more accuracy. Finally, analysis and simulation results reveal that compared with exist schemes, the proposed scheme has a good performance in mean square error (MSE) and bit error rate (BER).

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.3
• /
• pp.47-56
• /
• 2016

Recently many small and mid-sized hospitals are closing down or experiencing financial difficulties. As a result, in order to provide exceptional service that would increase their competitiveness, they implemented telemedicine service for the prescription of medicine necessary before a colonoscopy. This study is an analysis of how telemedicine service affects patient satisfaction. Through the focus group interview (FGI) of medical service providers, regarding telemedicine service and face-to-face service, it was appraised that telemedicine service was more effective than face-to-face service. Afterward, a second survey aimed at endoscopy patients was conducted in order to find out the value of telemedicine service. First, through the analysis of the three main factors of telemedicine service, conclusions were drawn(safety/reliability, convenience/rapidity, and economics). A follow-up analysis showed that convenience/rapidity had the greatest effect on telemedicine service satisfaction. Next the factors of the quality of medical service were analyzed and 3 main factors were deduced (the superiority of the external and internal environments/appropriateness, superiority of the medical team, telemedicine service). A follow-up analysis found that telemedicine service had the greatest effect on patient satisfaction. This study found that providing exceptional medical service that utilizes telemedicine service would improve patient satisfaction. Therefore, we would be able to form a strategic plan that would strengthen the competitiveness of small and mid-sized hospitals.

• Journal of the Korean Institute of Rural Architecture
• /
• v.15 no.1
• /
• pp.65-72
• /
• 2013

Neighborhood park has the multiple functions toward quantitative and qualitative improvement of quality of citizen's life. This study is about neighborhood park in 4 Local Industry Complex of Cheonan City. Through this study has intended to analyze the status of use and the importance level of facilities. To reach this goal, this study has analyzed the general information, use and importance level of users through such statistical methods as frequency analysis, regression analysis and reliability analysis. As a result, users has the speciality in the neighborhood park in industry complex. Break area or facilities for the workers should be installed. Not end once installed, but continually improved and more efficient management of park facilities will be made. Also, importance of facilities analysis has the higher in normal or importance. Management and cleanliness is especially higher in importance. Importance for the overall facility was affecting in order the facility design, management, safety, installation number.