• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.6
• /
• pp.1351-1359
• /
• 2003

Extreme programming is the most representative methodology among agile software development methodologies which is agile in business environment which change fast. As software industry is matured, usability of software quality characteristics is emphasized gradually, but effort to obtain usability in extreme programming is insufficient. To improve usability of extreme programming, in this thesis, a software life cycle is defined by six phase as exploration, planning, iterations to release, productionizing, maintenance, and death phase. In this thesis, an extreme programming process which can improve usability is proposed by definition of 11 activities including integration testing and acceptance testing for usability testing, The proposed process is validated with four aspects. The proposed process is enhanced to support acceptance testing activity. The proposed extreme programming process is able to support CMM level 4 and quality assurance practice of CMM.

• Journal of Environmental Impact Assessment
• /
• v.8 no.1
• /
• pp.93-105
• /
• 1999

Lately water quality of Daechong Reservoir has become more eutrophicated than ever before and there has been much concern over especially the eutrophication of the embayment near Daejon and Chongju Water Intake Tower every summer. The purpose of this study is to predict the impact of change in the pollutant loading, flowrate, nitrogen and phosphorus release from sediment, SOD(sediment oxygen demand) upon the water quality of Daechong Reservoir by WASP5/EUTR05 in order to suggest water quality management alternatives. The data of Sep. 1995 were used for the calibration of the model and those of Sep. 1997 was for verification. The result of the modeling can be summarized as follows. 1. The 50% increase(decrease) of pollutant loading has caused that of T-N concentration by 0.10-0.14 mg/l, T-P concentration by 0.003-0.005 mg/l, and CBOD concentration by 0.16-0.18 mg/l. But the ratio of DO change by the change of pollutant loading was relatively small. 2. The sensitivity test of NH4 flux to T-N and that of P04 flux to T-P shows that T-N and T-P concentration were changed more in the epilimnion segments (SEG4, SEG5, SEG6, SEG7) than the other segments. As SOD increases, DO was predicted to decrease more especially in the hypolimnion (SEG9-SEG14). 3. As flowrate increase, the concentration of T-N, T-P, and CBOD were predicted to decrease, but DO concentration increased especially in the hypolimnion segments(SEG11, SEG12, SEG13, and SEG14). As the flowrate changed from $119m^3/sec$ to $50m^3/sec$, the concentration of T-N and CBOD in the hypolimnion was predicted to decrease.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.14 no.3
• /
• pp.101-113
• /
• 2011

The purpose of this study are to develop a SDSS (Spatial Decision Support System) that can incorporate diverse opinions of stakeholders related the designation of protected areas (PA), and to employ the model for the readjustment of the boundary line of the Jirisan National Park of Korea. The SDSS would lead to more rational and less controversial decision-making during the expansion or removal of PA in Korea. Research methods are as follows. Firstly, to select evaluation criteria for SDSS for PA designation by using expert interview and literature survey. Secondly, to measure their preferences on the designation of additional PA or the removal of a part of PA based on the opinions of various stakeholders such as local residents, environmental groups, or public officials. Thirdly, to produce conservation priority maps based on a multi-criteria decision making technique. The SDSS would be used to rational decision making for the expansion of PA or the release of a certain part of PA by reflecting diverse preferences on biodiversity conservation and economic interest of residents. The visualization of conservation priority maps would also increase the efficiency of such decision making processes. The evaluation criteria for the expansion of PA for biodiversity conservation includes vegetation conservation value, wildlife conservation value, and the habitats of key species. The evaluation criteria for the removal of PA includes the proximity to roads and the boundary of PA, land use types, and conservation zoning of the PA. Preference weights are based on data collected from the Jirisan National Park. Both the conservation priority and removal priority maps are based on land parcels so that property rights of all parcels would be correctly represented.

• Korean Journal of Ecology and Environment
• /
• v.46 no.1
• /
• pp.1-9
• /
• 2013

Algal blooms in potable water supplies are becoming an increasingly prevalent and serious water quality problem around the world. In addition to precipitating taste and odor problems, blooms damage the environment, and some classes like cyanobacteria (blue-green algae) release toxins that can threaten human health, even causing death. There is a recognized need in the water industry for models that can accurately forecast in real-time algal bloom events for planning and mitigation purposes. In this study, using data for an interconnected system of rivers and reservoirs operated by a New Jersey water utility, various ANN models, including both discrete prediction and classification models, were developed and tested for forecasting counts of three different algal classes for one-week and two-weeks ahead periods. Predictor model inputs included physical, meteorological, chemical, and biological variables, and two different temporal schemes for processing inputs relative to the prediction event were used. Despite relatively limited historical data, the discrete prediction ANN models generally performed well during validation, achieving relatively high correlation coefficients, and often predicting the formation and dissipation of high algae count periods. The ANN classification models also performed well, with average classification percentages averaging 94 percent accuracy. Despite relatively limited data events, this study demonstrates that with adequate data collection, both in terms of the number of historical events and availability of important predictor variables, ANNs can provide accurate real-time forecasts of algal population counts, as well as foster increased understanding of important cause and effect relationships, which can be used to both improve monitoring programs and forecasting efforts.

• Korean Journal of Agricultural Science
• /
• v.41 no.3
• /
• pp.187-191
• /
• 2014

The cultivation area and use of genetically modified (GM) crops have been increased continuously over the world. Concerns about the potential risks of GM crops are also increasing. Safe management for the development and production of GM crops is required according to Living Modified Organism Act in Korea. Planning about the methods, duration, and frequency of environmental monitoring is also required for commercial use of GM crops. GM Zoysia japonica Steud. (event name: JG21) expressing resistance to glufosinate-ammonium has been generated previously. By using gamma ray treatment to JG21 we also developed male sterility and dwarf Z. japonica (event name: JG21-MS). The objective of this study was to establish the monitoring system for environment release of JG21-MS. In this study we extracted RNA from JG21 and JG21-MS and conducted RAPD (random amplified polymorphic DNA) method to distinguish JG21 and JG21-MS.

• Journal of KIBIM
• /
• v.6 no.3
• /
• pp.1-14
• /
• 2016

The usage of Building Information Modelling (BIM) in building projects has enabled improvement in project planning, implementation and collaboration process amongst various stakeholders within architecture, engineering and construction (AEC) industry. However, variations exist in the current practices of BIM implementation and coordination process in the industry. These variations result in inconsistent degree of BIM use across the construction industry. This inconsistency gives rise to several managerial and technological challenges such as data interoperability issues and purposeful integration and exchange of information within the BIM components. In order to tackle the issue, it is essential to analyse the different BIM approaches employed by the industry practitioners. BIM guidelines serve as a critical link between the BIM model, and its subsequent execution. They therefore provide the best reflection of BIM application and processes. This research paper aims to address the variations existing in BIM practices across the construction industry. It includes an extensive study of 21 existing, publicly available BIM-based guidelines in order to establish an understanding of the present state of practice and deduce issues and concerns related to them. All guidelines analysed in this paper are first categorised based on authorship and the release date for efficient comparison. The points of similarity and difference between them are thereby realized and outlined. In addition, the transition of project implementation process from traditional methods to BIM technology is also explained. The existence of inconsistencies in the BIM guidelines reviewed in this paper reflects the need of a BIM 'Code Compliance Check'. The Code Compliance Check will serve as a regulatory project guideline that will further improve the potential of BIM by incorporating a consistent BIM modelling methodology for the entire construction industry.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.2
• /
• pp.216-222
• /
• 2021

This is an experiment to complement new ways of using concentrated water discharged from the seawater desalination plant. In this study, metakaolin, which has excellent chloride ion immobilization effect, was used as the main binder, and 10% and 20% of calcium oxide were substituted with the activator. In addition, tap-water(TW) and reverse osmosis brine water(RW) were used as mixed water. As a result of the experiment, the mixture using RW showed higher compressive strength than TW. It also showed low water absorption and high density. In the mixture using RW as mixed water, a hydration reaction substance called Friedel's salt could be observed. Considering the corrosion problem of steel, RW is considered to be applicable to products such as non-reinforced concrete, brick, and curb stone. Through this study, it is thought that it is meaningful to propose a new application method other than the ocean release of RW.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.10
• /
• pp.3513-3533
• /
• 2021

This paper identifies challenging factors that hinder the successful settlement of the MyData industry, which is drawing global attention, and it analyzes the priority of solutions. To this end, a mixed-methodology including analytic network process technique was borrowed step-by-step to identify variables, analyze them, and provide interpretations. From the first step, the study found that the market aspect was the most important for the success of the K-MyData business, and the release of interesting representative services was found to be the easiest way to inspire market growth. From the second step, as a socio-cultural issue, the lack of consensus on data provisioning was found to present a major obstacle. To achieve consensus, it is very important for business participants to gain the trust of consumers. From the third step, it was found that the scope of data collection and responsibility for accidents needs to be clarified. Government and business-related persons must observe the principles of MyData while tackling these obstacles. It is also necessary for the government to be sensitive to changes in the environment as a focal actor. Doing so will lead to data industry activation and will help guarantee of rights of data subjects in a balanced manner. Finally, it is notable that technical barriers now have the lowest priority. Although technology is important, MyData business must also overcome market, socio-cultural, and institutional challenges. The study selected Korea as its research target, but it is expected to provide useful insights to other countries that are planning MyData business similar to Korea.

• Archives of Plastic Surgery
• /
• v.48 no.6
• /
• pp.691-698
• /
• 2021

Background The reverse sural artery (RSA) flap is widely used for lower extremity reconstruction. However, patients sometimes suffer from donor site complications such as scar contracture and paresthesia, resulting in dissatisfaction with the aesthetic outcomes. This study investigated the characteristics of donor site morbidity associated with RSA flaps and described our experiences of dealing with complications by performing resurfacing surgery using thoracodorsal artery perforator (TDAP) flaps. Methods From April 2008 to August 2018, a total of 11 patients underwent contracture release and resurfacing surgery using TDAP flaps due to donor morbidity associated with RSA flaps. All affected donor sites were covered with a skin graft, the most common of which was a meshed split-thickness skin graft (six cases). Results Eight of the 11 patients (72.7%) suffered from pain and discomfort due to scar contracture, and seven (63.6%) complained of a depression scar. The donor sites were located 6.3±4.1 cm below the knee joint, and their average size was 140.1 cm². After resurfacing using TDAP flaps, significant improvements were found in the Lower Extremity Functional Scale (LEFS) scores and the active and passive ranges of motion (AROM and PROM) of the knee joint. The LEFS scores increased from 45.1 to 56.7 postoperatively (P=0.003), AROM increased from 108.2° to 118.6° (P=0.003), and PROM from 121.4° to 126.4° (P=0.021). Conclusions Planning of RSA flaps should take into account donor site morbidity. If complications occur at the donor site, resurfacing surgery using TDAP flaps achieves aesthetic and functional improvements.

• International conference on construction engineering and project management
• /
• 2005.10a
• /
• pp.1028-1035
• /
• 2005

Traditional Industries were planning the major role for Taiwan's economy. However, we need to face the competition from developing countries. Moving manufacturing department to other low salary countries, such as China, can only temporarily release some limited pressure. The final and complete solutions are to equip on R&D, refine techniques, improve management capabilities, upgrade business, and reform physique. Currently there are some ERP systems on the market; however, they are designed for common purpose and difficult to introduce into industry. The expensive price is another factor to make them be popular. In this research we will Object Oriented, Visual Modeling, ER Model and Windows Environment to develop an Integrated Management System for Sports Requisites Industries (IMSSRI). We will integrate all information from all departments such as development, business, material administration, manufacture, shipping, and financial. When development people construct the all modules, components, cutting molds, materials and accessories, IMSSRI will calculate all needed materials and cost for each product. This cost will be used for quotation to report to our customers. When customers confirm the order, system will transfer all necessary materials into Material Administration System. IMSSRI can generate manufacturing forms and material raw lists for manufacture department. All related information such as stocking, returning goods, material requesting, and material returning can be integrated so we can control all details of the whole enterprise. Through the help of this system, we hope we can save man-power, reduce human mistakes, raise management capabilities for tradition manufacturing industries and create another possibility of eternal operating for Taiwan's Industries.