• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.6
• /
• pp.1153-1156
• /
• 2012

Daegwallyeong area to be formed along the mountainous terrain more above 800 m of sea level is known as the cold zone to occur frequently wind, rain and fog. This study to evaluate the stability of crop production and agricultural production potential in the Daegwallyeong was calculated for the low temperature frequency of occurrence and potential evapotranspiration changes with announce the release of Korea Meteorological Administration (KMA) from 1972 to 2009 up to 38 years. Evapotranspiration calculated FAO and other international standard method authorized under the PENMAN-MONTEITH Method was used, and the low temperature onset and frequency of the Gumbel probability density function was used. As a result, the variation of day evaporation for 38 years were showed to respectively width of variation from maximum $9mm\;day^{-1}$ to minimum $0.5mm\;day^{-1}$. The frequency of reappearance to first emergence day that lasts more than 5 days with temperature $5^{\circ}C$ over is 3 April a 50-year frequency, 10 April a 25-year frequency, 20 April a 10-year frequency, 28 April a 5-year frequency, 8 May a 2-year frequency. Psychrotrophic crop to growth temperature more than $5^{\circ}C$ can be secured to stable production with planting after May 8, prior to planting for normal growth can be seen that the risk of growth.

• Economic and Environmental Geology
• /
• v.33 no.2
• /
• pp.91-100
• /
• 2000

It has been more than ten years since Dukun mine was abandoned. Tailings of waste deposits and slime dumps in the abandoned Dukum mine have been left to be deserted for fifty years. The results of fifty years of neglecting are nothing short of major environmental problems. Slime dumps have been exposed to air and water in the mine over ten years and then soil profile has been formed well. Soil in the upper layer (A horizon) is the light gray color due to the leaching of cations. Soil in the lower layer (A2 horizon, 0.2∼0.3m)is tinted with reddish brown and yellowish brown color due to the development of iron oxides and iron hydroxides. Soil in the lower part of B horizon of (1.0∼3.0m) with the growth of copper and zinc oxides exposes to the bluish green, light blue, and dark gray. Ranging from 3m to 8m in depth, 85 samples were taken from 22 sampling sites with 50m intervals located on the slime dump area with hand auger and trench (open cut). As tailings was distributed, heavy metal elements extracted by the process of surface water and ground water move and disperse in to the hydrosphere. Waste dumps were distributed in and around the mine and water draining from those dumps be a potential source of contamination. Soils, thus, can be dispersed into downslope and downstream through wind and water by clastic movement. These materials may be deposited in another horizon if the water is withdrawn, or if the materials are precipitated as a result of differences in pH, or other conditions in deeper horizons. These were primarily associated with acid mine drainage. The characteristics and rate of release of acid mine drainage are influenced by various chemical and biological reactions at the source of acid generations. Prolonged extration of heavy metal elements has a detrimental effect on the agricultural land and residental area. Twenty soil samples were collected from the agricultural land in the area (0∼30 cm). Seventeen samples were also taken from the sediment in the stream running alongside the dumps. The dispersion patterns of heavy metal elements are as follows: The content of As ranged 2∼6 ppm in a horizon, 20∼125 ppm in B horizon with large amount of clay mineral is concentrated and the content of Cd ranged 1∼2 ppm in A horizon, 4∼22 ppm in B horizon. Like Cd, the content of As, Cu, Zn, Pb in B horizon is higher than that in A horizon (approximately 5∼100 times). When soil formation proceeds in stages, it is necessary to investicate the B horizon with the concentration of heavy metal and preventive measures will have to established.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.1
• /
• pp.1-7
• /
• 2016

In order to treat electrolysis nickel plating pickling wastewater to meet the effluent limit less than 3.0 mg/L, the electrolysis process by using soluble and insoluble electrode were studied. Electrolysis using soluble electrodes has a characteristic of easy elution from the electrode which the insoluble electrodes close not release metal from the electrode. For these reasons, there exist different characteristics in nickel removal efficiency, purity of nickel sludge. With this connection, the feasibility test were concluded to develop optimal conditions for the treatment of pickling wastewater electrolysis by using soluble electrodes, insoluble electrodes. Optimal condition of current density, pH were derived from the pickling wastewater using insoluble electrodes. It was concluded the highest removal efficiency of nickel at the operation condition of at pH 9, current density of $15mA/cm^2$. At these conditions, 95.3% purity of nickel sludge was achieved, iron content was 2.9%. Optimal condition when using soluble electrodes was derived current density of $10mA/cm^2$, pH 9. Purity of nickel sludge was 77.3%, iron content was 21.0%. 50.7% and 24.2% of operating cost can be saved by the use of soluble electrodes and the use of insoluble electrodes, respectively.

• Journal of the Korean Institute of Gas
• /
• v.22 no.4
• /
• pp.27-31
• /
• 2018

Classification of explosion hazard areas is very important in terms of cost and safety in the workplace handling flammable materials. This is because the radius of the hazardous area determines whether or not the explosion-proof equipment is installed in the electrical machinery and apparatus. From November 6, 2017, KS C IEC-60079-10-1: 2015 will be issued and applied as a new standard. It is important to understand and apply the difference between the existing standard and the new standard. Leakage coefficients and compression factors were added to the leakage calculation formula, and the formula of evaporation pool leakage, application of leakage ball size, and shape of explosion hazard area were applied. The range of the safety factor K has also been changed. Also, in the radius of the hazardous area, the existing standard applies the number of ventilation to the virtual volume, but the revised standard is calculated by using the leakage characteristic value. In this study, we investigated the differences from existing standards in terms of ventilation and dilution and examined the effect on the radius of the hazard area. Comparisons and analyzes were carried out by applying revised standards to workplaces where existing explosion hazard locations were selected. The results showed that even if the ventilation and dilution were successful, the risk radius was not substantially affected.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.7
• /
• pp.692-698
• /
• 2020

This paper examines the effects of a multi-stage pilot split injection strategy on combustion and exhaust emission factors in a single-cylinder diesel engine. One analysis noted that in the single-injection condition, the maximum in-cylinder pressure and rate of heat release were highest. The pilot injection quantity was evenly divided, showing a tendency to decrease as the number of injections increased. In another injection condition, when the multi-stage pilot split injection strategy was applied, IMEP, engine torque, and combustion increased. The COV_IMEP was greatest with the lowest combustion efficiency. The combustion ability was poor. In a single injection condition, the O₂ concentration in the exhaust gas was the lowest and the CO₂ was the highest. When the multi-stage split injection strategy was applied, the low temperature combustion process proceeded, and the oxidation rate of CO₂ decreased while the emission level increased. In a single injection condition in which a locally rich mixture was formed, the HC emission level showed the highest results. A 55.6% reduction of NOx emission occurred under a three-stage pilot injection condition while conducting a multi-stage pilot split injection strategy.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.7
• /
• pp.485-491
• /
• 2011

This study was performed to investigate the characteristics of nutrient removal of municipal wastewater in membrane bioreactor system. Membrane bioreactor consists of four reactors such as two intermittently anaerobic tanks, the oxic tank and the sludge solubilizaion tank with an internal recycle. The hydraulic retention time (HRT) and flux were 6.5 hours and $20.4L/m^2{\cdot}hr$ (LMH), respectively. The removal efficiency of $COD_{Cr}$, SS, TN and TP were 94.0%, 99.3%, 99.9%, 69.9%, and 66.9%, respectively. The estimated true biomass yield, specific denitrification rate (SDNR), specific nitrification rate (SNR), specific phosphorus release rate (SPRR) and specific phosphorus uptake rate (SPUR) were 0.34 kgVSS/kgBOD d, $0.067mgNO_3-N/mgVSS{\cdot}d$, $0.028mgNH_4-N/mgVSS{\cdot}d$, 16.0 mgP/gVSS d and 2.1 mgP/gVSS d, respectively. The contents of nitrogen and phosphorus of biomass were 8.9% and 3.5% on an average.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.13 no.4
• /
• pp.279-287
• /
• 2010

To identify characteristics of the water quality at Goseong bay, we analyzed long term monitoring data collected at surface and bottom water which was accumulated during the period of 1987~2009. The result showed that the waters of Goseong bay represented mesotrophic level that is based on chlorophyll-a, DIP and DIN and seasonal average of COD that indicates level by the COD criteria. This analysis can be translated that the waters is comparatively clean even though the waters is in the closed bay that slowly diffuses influx mass. We also did the time series analysis, correlation analysis and regression analysis on the moving average of the water parameter at Goseong bay. According to the results, DIP showed a increasing trend as time passed while DIN was on a decreasing trend under the same condition. In the waters of Goseong bay, the phyto-plankton growth was shown to be limited by DIN concentration. The chlrophyll-a was at the peak in August, at $4.60{\mu}g/L$. As the seasonal average and index were the highest in November, it was understood that the balance of nutrient at Goseong bay was dependent more on inner factors, ie, mass farming of aquatic species and release of bottom sediment rather than on inflow of fresh water. Accordingly, it is needed to consider the balance of nutrient like DIP and DIN to manage the water quality or estuaries at Goseong bay.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.7
• /
• pp.3094-3101
• /
• 2012

This study provides fundamental data in order to obtain improved medical services and competitiveness by analyzing the satisfaction level of patients receiving inpatient services at general hospitals. Data from self-administered surveys distributed to inpatient subjects at local general hospitals was collected from 09/19/2011 to 09/30/2011. Firstly, the results of 320 surveys show that the average level of satisfaction from inpatient services was 3.25 (maximum 4.0). Secondly, the results from general characteristics and satisfaction from medical care provider services showed that there is a statistical significance regarding medical treatment, health condition, the number of times admitted to the hospital, and hospital environment including hospital admittance/release proceeders. Also the satisfaction with other services is statistically significant with regards to age, medical treatment, health condition, and the number of times admitted to the hospital. Thirdly, there is a statistically significant positive correlation between inpatient services and levels of satisfaction. Finally, from the analysis of factors influencing inpatient satisfaction showed that physician services and other services significantly affect satisfaction. In conclusion, in order to increase inpatient levels of satisfaction the workforce involved medical treatment of patients need to be retained and a variety of programs need to be in operation that will satisfy patients while they stay in the hospital. Further research is expected.

• Korean Security Journal
• /
• no.62
• /
• pp.113-134
• /
• 2020

This study was conducted to examine the influence of the psychological health of the released offenders on their adaptation to community. Researchers analyzed the survey data of 216 participants who received joint marriage support from the Korea Legal Protection and Welfare Corporation. The results showed that the education level, marriage status, and monthly income were having a positive influence on the community adaptation of the released offenders, and the higher the depression and inter-personality among the risk factors of psychological health, the more negative the community adaptation. A higher sense of self-esteem, a psychological health protection factor, has a positive effect on community adaptation while reducing the influence of risk factors, depression and inter-personality. In sum, high self-esteem can contribute to increasing social life satisfaction after release from prison, promote risk factors to positive life changes, suppress negative situations and increase the possibility of successful community adaptation. Although this study confirmed that self-esteem is the most important factor among psychological factors for successful community adaptation of inmates, it will require relevant follow-up research and multi-disciplinary support because psychological factors alone cannot solve the problem.

• Nuclear Engineering and Technology
• /
• v.52 no.7
• /
• pp.1396-1408
• /
• 2020

Filtered containment venting system (FCVS) is one of the severe accident mitigation systems designed to release containment pressurization to maintain its integrity. The thermal-hydraulic behaviors in FCVSs are important since they affect the operation characteristics of the FCVS. In this study, a representative FCVS was modeled by RELAP5/Mod3.3 code, and the Station BlackOut (SBO) was chosen as an accident scenario. The thermal-hydraulic behaviors of an FCVS during long-term operation with two venting strategies (open-and-close strategy, open-and-non-close strategy) and the sensitivity analysis of important parameters were investigated. The results show that the FCVS can operate up to 250 h with a periodic open-and-close strategy during an SBO. Under the combined effects of steam condensation and water evaporation, the solution inventory in the FCVS increases during the venting phase and decreases during the intermission phase, showing a periodic pattern. Under this condition, the appropriate initial water level is 3-4 m; however, it should be adjusted according to the environment temperature. The FCVS can accommodate a decay heat power of 150-260 kW and may need to feed water for a higher decay heat power or drain water for a lower decay heat power during the late phase. The FCVS can function within an opening pressure range from 450 kPa to 500 kPa and a closing pressure range between 250 kPa and 350 kPa. When the open-and-non-close strategy is adopted, the solution inventory increases quickly in the early venting phase due to steam condensation and then decreases gradually due to the evaporation of water; drying-up may occur in the late venting phase. Decreasing the venting pipe diameter and increasing the initial water level can mitigate the evaporation of the scrubbing solution. These results are expected to provide useful references for the design and engineering application of FCVSs.