• 한국염색가공학회지
• /
• 제8권3호
• /
• pp.52-58
• /
• 1996

In order to study an applicable level for the graft finish of silk filaments and the characteristics of silk fabric, some sample fabrics were woven with grafted weft and the characteristics of sample fabrics were analyzed to evaluate the mechanical properites and the handle values according to the graft yield(%) of MMA and HEMA monomers on silk filaments. 1. The tensile properties were detected in the increase of linearity(LT) and the recovery in time of the increasing resilience(RT). 2. The bending properties were detected to have a lot of effect on the balance of bending rigidity(B) to hysteresis(2HB) according to the elastic relaxation of warp tension and the interlacing stress. 3. The shearing properities were detected to show the softness and the elastics in a case of the decrease in shearing rigidity(G) and hysteresis(2HG, 2HG5) according to the graft yields. 4. The compression properties were detected in the decrease of linearity(LC) and the uniformity of resilience(RC). It explains that the tendancies of compressible variation is not accepted. 5. The surface properities were detected to be affected by the surface forms of grafted silk filaments and the variation in the morphologies of interlacing sections. Considering the interlacing eveness, MMA grafted fabrics were accepted within the level of WOMEN'S THIN DRESS(KN-201-LDY) but HEMA grafted fabrics were not accepted. 6. The variation of handles were detected in the increase of total hand(TAV) within the levels of 65% of KOSHI and 82% of HARI on the average. 7. The handle fashions were detected in the nature of Habuta and Dechine from MAA graft but the nature of Fugi were shaped from HEMA graft in proportion to the graft yields.

• Physical Therapy Rehabilitation Science
• /
• 제9권4호
• /
• pp.302-308
• /
• 2020

Objective: The endurance and strength of deep neck flexor (DNF) muscles have a major role on the function and stability of the cervical spine. In recent years, there has been a lack of research that have investigated the muscle tone of the superficial neck muscles. The purpose of this study was to examine the relationship of between contraction ratio of the DNF and sternocleidomastoid (SCM) muscles, DNF endurance, and muscle tension of the neck muscles. Design: Cross-sectional study. Methods: Forty-seven subjects (male=20, female=27) participated in this study. The muscle tone of the upper trapezius (UT), SCM, and suboccipital (SO) muscle was measured using a contact soft tissue tone-measuring instrument. For the contraction ratio of the SCM and longus colli muscle, the thickness of the relaxation and maximum contraction state of the SCM and longus colli muscles were assessed using a diagnostic ultrasound measuring instrument and a pressure biofeedback unit. The deep neck flexor endurance test (DNFET) was performed in a cranio-cervical flexion posture. The correlations between the measured variables were investigated. Results: The relationship between the DNFET and SO tone showed a significant negative correlation (p<0.05). The relationship between the DNFET and contraction ratio showed a significant positive correlation (p<0.01). There was no significant correlation between the DNFET and SCM and UT tone. Conclusions: This study confirmed that there is a relationship between DNF endurance, DNF activation, and SO tone. The information on the results of this study may be used as a reference that can be actively applied in the clinical environment.

• 대한한의학회지
• /
• 제43권4호
• /
• pp.102-130
• /
• 2022

Objectives: The persistence and unpredictability of coronavirus disease (COVID-19) and new measures to prevent direct medical intervention (e.g., social distancing and quarantine) have induced various psychological symptoms and disorders that require self-treatment approaches and integrative treatment interventions. To address these issues, the Korean Medicine Mental Health (KMMH) center developed a field manual by reviewing previous literature and preexisting manuals. Methods: The working group of the KMMH center conducted a keyword search in PubMed in June 2021 using "COVID-19" and "SARS-CoV-2". Review articles were examined using the following filters: "review," "systematic review," and "meta-analysis." We conducted a narrative review of the retrieved articles and extracted content relevant to previous manuals. We then created a treatment algorithm and recommendations by referring to the results of the review. Results: During the initial assessment, subjective symptom severity was measured using a numerical rating scale, and patients were classified as low- or moderate-high risk. Moderate-high-risk patients should be classified as having either a psychiatric emergency or significant psychiatric condition. The developed manual presents appropriate psychological support for each group based on the following dominant symptoms: tension, anxiety-dominant, anger-dominant, depression-dominant, and somatization. Conclusions: We identified the characteristics of mental health problems during the COVID-19 pandemic and developed a clinical mental health support manual in the field of Korean medicine. When symptoms meet the diagnostic criteria for a mental disorder, doctors of Korean medicine can treat the patients according to the manual for the corresponding disorder.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2004년도 ISMP Pb-free solders and the PCB technologies related to Pb-free solders
• /
• pp.233-241
• /
• 2004

A new alloy definition will be presented concerning increasing demands for the board level reliability of miniaturized interconnections. The damage mechanism for LFBGA components on different board finishes is not quite understood. Further demands from mobile phones are the drop test, characterizing interface performance of different package constructions in relation to decreased pad constructions and therefore interfaces. The paper discusses the characterization of interfaces based on SnPb, SnPbXYZ, SnAgCu and SnAgCuInNd ball materials and SnAgCuInNd as solder paste, the stability after accelerated tests and the description of modified interfaces strictly related to the assembly conditions, dissolution behavior of finishes on board side and the influence of intermetallic formation. The type of intermetallic as well as the quantity of intermetallics are observed, primaliry the hardness, E modules describing the ability of strain/stress compensation. First results of board level reliability are presented after TCT-40/+150. Improvement steps from the ball formulation will be discussed in conjunction to the implementation of lead free materials In order to optimize ball materials for area array devices accelareted aging conditions like TCTs were used to analyze the board level reliability of different ball materials for BGA, LFBGA, CSP, Flip Chip. The paper outlines lead-free ball analysis in comparison to conventional solder balls for BGA and chip size packages. The important points of interest are the description of processability related to existing ball attach procedures, requirements of interconnection properties and the knowledge gained the board level reliability. Both are the primary acceptance criteria for implementation. Knowledge about melting characteristic, surface tension depend on temperature and organic vehicles, wetting behavior, electrical conductivity, thermal conductivity, specific heat, mechanical strength, creep and relaxation properties, interactions to preferred finishes (minor impurities), intermetallic growth, content of IMC, brittleness depend on solved elements/IMC, fatigue resistance, damage mechanism, affinity against oxygen, reduction potential, decontamination efforts, endo-/exothermic reactions, diffusion properties related to finishes or bare materials, isothermal fatigue, thermo-cyclic fatigue, corrosion properties, lifetime prediction based on board level results, compatibility with rework/repair solders, rework temperatures of modified solders (Impurities, change in the melting point or range), compatibility to components and laminates.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2004년도 ISMP Pb-free solders and the PCB technologies related to Pb-free solders
• /
• pp.211-219
• /
• 2004

A new alloy definition will be presented concerning increasing demands for the board level reliability of miniaturized interconnections. The damage mechanism for LFBGA components on different board finishes is not quite understood. Further demands from mobile phones are the drop test, characterizing interface performance of different package constructions in relation to decreased pad constructions and therefore interfaces. The paper discusses the characterization of interfaces based on SnPb, SnPbXYZ, SnAgCu and SnAgCuInNd ball materials and SnAgCuInNd as solder paste, the stability after accelerated tests and the description of modified interfaces stric시y related to the assembly conditions, dissolution behavior of finishes on board side and the influence of intermetallic formation. The type of intermetallic as well as the quantity of intermetallics are observed, primaliry the hardness, E modules describing the ability of strain/stress compensation. First results of board level reliability are presented after TCT-40/+150. Improvement steps from the ball formulation will be discussed in conjunction to the implementation of lead free materials. In order to optimize ball materials for area array devices accelareted aging conditions like TCTs were used to analyze the board level reliability of different ball materials for BGA, LFBGA, CSP, Flip Chip. The paper outlines lead-free ball analysis in comparison to conventional solder balls for BGA and chip size packages. The important points of interest are the description of processability related to existing ball attach procedures, requirements of interconnection properties and the knowledge gained the board level reliability. Both are the primary acceptance criteria for implementation. Knowledge about melting characteristic, surface tension depend on temperature and organic vehicles, wetting behavior, electrical conductivity, thermal conductivity, specific heat, mechanical strength, creep and relaxation properties, interactions to preferred finishes (minor impurities), intermetallic growth, content of IMC, brittleness depend on solved elements/IMC, fatigue resistance, damage mechanism, affinity against oxygen, reduction potential, decontamination efforts, endo-/exothermic reactions, diffusion properties related to finishes or bare materials, isothermal fatigue, thermo-cyclic fatigue, corrosion properties, lifetime prediction based on board level results, compatibility with rework/repair solders, rework temperatures of modified solders (Impurities, change in the melting point or range), compatibility to components and laminates.

• Archives of Plastic Surgery
• /
• 제40권4호
• /
• pp.341-347
• /
• 2013

Background Intractable chronic scalp ulcers with cranial bone exposure can occur along the incision after cranioplasty, posing challenges for clinicians. They occur as a result of severe scarring, poor blood circulation of the scalp, and focal osteomyelitis. We successfully repaired these scalp ulcers using a vascularized bipedicled pericranial flap after complete debridement. Methods Six patients who underwent cranioplasty had chronic ulcers where the cranial bone, with or without the metal plate, was exposed along the incision line. After completely excising the ulcer and the adjacent scar tissue, subgaleal dissection was performed. We removed the osteomyelitic calvarial bone, the exposed metal plate, and granulation tissue. A bipedicled pericranial flap was elevated to cover the defect between the bone graft or prosthesis and the normal cranial bone. It was transposed to the defect site and fixed using an absorbable suture. Scalp flaps were bilaterally advanced after relaxation incisions on the galea, and were closed without tension. Results All the surgical wounds were completely healed with an improved aesthetic outcome, and there were no notable complications during a mean follow-up period of seven months. Conclusions A bipedicled pericranial flap is vascularized, prompting wound healing without donor site morbidity. This may be an effective modality for treating chronic scalp ulcer accompanied by the exposure of the cranial bone after cranioplasty.

• 산업과 과학
• /
• 제1권2호
• /
• pp.9-16
• /
• 2022

본 연구는 이완음악감상이 입원한 정신질환자의 기분상태 및 자율신경계 즉 심박동수에 미치는 영향을 파악하고자 실험군 17명, 대조군 17명을 대상으로 시행한 무작위 대조군 전후설계이다. 수집된 자료는 SPSS V15.0으로 분석하였다. 기분상태와 자율신경계 즉 심박동수는 두 집단 간에 통계적으로 유의한 차이가 있어 이완음악감상의 효과를 객관적으로 검증하였다(<.05). 기분상태의 하위 영역 중 분노(>.39)와 혼돈(>.33)을 제외한 긴장(<.00), 우울(<.00), 활력(<.03), 피로(<.01)에서 유의한 차이가 있는 것으로 나타나 입원한 정신질환자에게 적용할 수 있는 효과적인 중재방법임을 입증하였다. 향후 장기적인 중재 연구개발 및 적용과 개인의 선호음악을 이용하여 기분변화와 자율신경계에 효과연구를 제언하고자 한다.

• 디지털융복합연구
• /
• 제10권8호
• /
• pp.275-286
• /
• 2012

종합병원 간호사의 노인환자 간호업무로 인한 스트레스, 노인환자와 보호자로 인한 스트레스와 그 대처방법을 탐색적으로 살펴보고자함이 연구의 주요 목적이다. 이를 위해 서울시에 위치한 400병상 이상 의료기관에서 근무하는 간호사를 대상으로 하였고, 총 280부가 최종분석에 사용되었다. 자료 분석방법은 빈도분석, t-검증과 일원분산분석(One-way ANOVA), Scheffe방법으로 사후검증을 하였다. 주된 연구결과는 다음과 같다. 첫째, 간호사의 노인관련 스트레스는 보호자스트레스가 가장 크고, 환자스트레스가 두 번째로 크며, 업무스트레스가 그 다음을 차지하는 것으로 나타났다. 둘째, 간호사들의 대처방법은 사회적 지지를 가장 널리 활용하고 있고, 문제 중심 대처방법을 두 번째로 많이 활용하고 있으며, 그 다음으로 긍정적 관점, 긴장해소, 무관심, 희망적 관점의 순으로 나타났다. 이상의 간호사들의 노인환자에 의한 스트레스 탐색을 통해 노인환자를 위한 복잡하고 다양하며 항상 변화하는 상황에 대처 할 수 있는 능력을 개발하기 위한 몇 가지 후속연구를 제언하였다.

• 대한한의학방제학회지
• /
• 제7권1호
• /
• pp.167-181
• /
• 1999

Rhizoma Arisaematis, Lignum Akebiae, Rhizoma Zedoariae, Cortex Eucommiae, Folium Perillae, Radix Sophorae Subprostratae, Radixi, Radix Ledeboutriellae, Rhizoma Atractylodis, Herba Ephedrae, Radix Puerariae and Radi Aconitx Bupleuri have been used in Korea for many centuries as a treatment for various disease. The purpose of the present study is to determine the effect of several herbs on norepinephrine(NE) induced blood vessel contraction in rabbits and pigs. Rabbit(2 kg, male) were killed by $CO_2$ exposure and a segment (8-10mm) of each rabbit was cut into equal segments and mounted in a tissue bath. Contractile force was measured with force displacement transducers under 2-3 g loading tension. The dose of norepinephrine(NE) which evoked 50% of maximal response $(ED_{50})$ was obtained from cumulative dose response curves for NE $(10^{-6}{\sim}10^{-3}M)$. Contractions evoked by NE $(ED_{50})$ were inhibited significantly by Rhizoma Arisaematis, Lignum Akebiae, Rhizoma Zedoariae, Cortex Eucommiae, Folium Perillae, Radix Sophorae Subprostratae and Herba Ephedrae in abdominal aorta. Contractions evoked by NE $(ED_{50})$ were inhibited significantly be Lignum Akebiae, Rhizoma Zedoariae, Cortex Eucommiae, Herba Ephedrae, Radix Puerariae and Radix Bupleuri in femoral artery. Contractions evoked by NE $(ED_{50})$ were inhibited significantly by Radix Sophorae Subprostratae, Radix Aconiti and Herba Ephedrae in renal artery. These results indicate that each herb can relax NE induced contraction of rabbit and pig blood vessel selectively, and that this relaxation relates to Gui-Gyung(歸經).

• Bulletin of the Korean Chemical Society
• /
• 제33권5호
• /
• pp.1491-1504
• /
• 2012

InP quantum dot (QD)-organosilicon nanocomposites were synthesized and their photoluminescence quenching was mainly investigated because of their applicability to white LEDs (light emitting diodes). The as-synthesized InP QDs are capped with myristic acid (MA), which are incompatible with typical silicone encapsulants. We have introduced a new ligand, 3-aminopropyldimethylsilane (APDMS), which enables embedding the QDs into vinyl-functionalized silicones through direct chemical bonding. The exchange of ligand from MA to APDMS does not significantly affect the UV absorbance of the InP QDs, but quenches the PL to about 10% of its original value with the relative increase in surface related emission intensities, which is explained by stronger coordination of the APDMS ligands to the surface indium atoms. InP QD-organosilicon nanocomposites were synthesized by connecting the QDs using a short cross-linker such as 1,4-divinyltetramethylsilylethane (DVMSE) by the hydrosilylation reaction. The formation and changes in the optical properties of the InP QD-organosilicon nanocomposite were monitored by ultraviolet visible (UV-vis) absorbance and steady state photoluminescence (PL) spectroscopies. As the hydrosilylation reaction proceeds, the QD-organosilicon nanocomposite is formed and grows in size, causing an increase in the UV-vis absorbance due to the scattering effect. At the same time, the PL spectrum is red-shifted and, very interestingly, the PL is quenched gradually. Three PL quenching mechanisms are regarded as strong candidates for the PL quenching of the QD nanocomposites, namely the scattering effect, F$\ddot{o}$rster resonance energy transfer (FRET) and cross-linker tension preventing the QD's surface relaxation.