• Resources Recycling
• /
• v.15 no.4 s.72
• /
• pp.36-43
• /
• 2006

There was some difficulty dewatering properties due to small porosity diameter of cake, when pigment sludge contained fine particle was formed by cake under the dewatering. It was difficult to dewater the sludge with fine particles with the conventional mechanical dewatering method. This study was to improve the dewatering rate as discharging the water from porosity of cake easily, supplying the low heat to the cake layer. Thermal dewatering equipment of piston type to keep up constant temperature on the cake was set up and relative experiment was conducted for sludge of 200 g with fine pigment particle. As test results. filtration of 176.8 g, cake weight of 19.4 g, cake thickness of 4.2 mm was measured, and it was analyzed that the water content of cake was 47 wt% and dewatering velocity, which moaned the residual d교 sloid amount per dewatering area, was $2.1DS\;m^{2}{\cdot}cycle$. This results showed that filtration increased, cake weight and thickness decreased and dewatering velocity increased against mechanical dewatering method. And water content of cake decreased about 30%, so the result which dewatering rate improved was drew generally. The reason is that the inner vapor pressure working at the cake porosity increased as applying the low heat to the cake layer, which lead to discharge the water from porosity easily. Therefore, this study was estimated by the useful technology for sludge reduction.

• Journal of Animal Reproduction and Biotechnology
• /
• v.35 no.4
• /
• pp.307-314
• /
• 2020

In the present study, we examined the effect of straw size on spermatozoa motility, viability, acrosome integrity, mitochondrial membrane potential, and plasma membrane integrity after freezing-thawing. Hanwoo semen was collected from three bulls and diluted with an animal protein-free extender, divided into two groups, namely, 10 million spermatozoa in 0.25 mL and 20 million spermatozoa in 0.5 mL straw, and cryopreserved. In Experiment 1, the motility and motility parameters of the frozen-thawed spermatozoa were evaluated. After freezing-thawing, the spermatozoa motility parameters fast progressive, straight line velocity, and average path velocity were compared between the 0.25 mL straw and 0.5 mL straw groups. They were 35.2 ± 1.0 and 32.3 ± 0.7%, 34.6 ± 0.7 and 31.8 ± 0.5 μm/s, 51.4 ± 1.3 and 47.1 ± 1.1 μm/s, 0.25 mL straw and 0.5 mL straw groups, respectively. In Experiment 2, the viability, acrosome membrane integrity, and mitochondrial membrane potential of the frozen-thawed spermatozoa were assessed. After freezing-thawing, the percentages of spermatozoa with live, intact acrosomes and high mitochondrial membrane potential were compared between the in 0.25 mL straw and 0.5 mL straw groups. They were 48.0 ± 2.6% and 35.6 ± 2.8% between the 0.25 mL straw and 0.5 mL straw groups. In Experiment 3, the plasma membrane integrity of frozen-thawed spermatozoa was compared. After freezing-thawing, the plasma membrane integrity was higher for the in 0.25 mL straw group than the 0.5 mL straw group. They were 62.0 ± 2.2 and 54.1 ± 1.3% between the 0.25 mL straw and 0.5 mL straw groups. In conclusion, our results suggest that freezing semen in 0.25 mL straw improves the relative motility, viability, and acrosomal, mitochondrial membrane potential, and plasma membrane integrity of Hanwoo bull spermatozoa.

• Geomechanics and Engineering
• /
• v.35 no.2
• /
• pp.121-133
• /
• 2023

The demand for cement and limestone crushed materials has increased many folds due to the tremendous increase in construction activities in Pakistan during the past few decades. The number of cement production industries has increased correspondingly, and so the rock-blasting operations at the limestone quarry sites. However, the safety procedures warranted at these sites for the blast-induced ground vibrations (BIGV) have not been adequately developed and/or implemented. Proper prediction and monitoring of BIGV are necessary to ensure the safety of structures in the vicinity of these quarry sites. In this paper, an attempt has been made to predict BIGV using artificial neural network (ANN) at three selected limestone quarries of Pakistan. The ANN has been developed in Python using Keras with sequential model and dense layers. The hyper parameters and neurons in each of the activation layers has been optimized using randomized and grid search method. The input parameters for the model include distance, a maximum charge per delay (MCPD), depth of hole, burden, spacing, and number of blast holes, whereas, peak particle velocity (PPV) is taken as the only output parameter. A total of 110 blast vibrations datasets were recorded from three different limestone quarries. The dataset has been divided into 85% for neural network training, and 15% for testing of the network. A five-layer ANN is trained with Rectified Linear Unit (ReLU) activation function, Adam optimization algorithm with a learning rate of 0.001, and batch size of 32 with the topology of 6-32-32-256-1. The blast datasets were utilized to compare the performance of ANN, multivariate regression analysis (MVRA), and empirical predictors. The performance was evaluated using the coefficient of determination (R²), mean absolute error (MAE), mean squared error (MSE), mean absolute percentage error (MAPE), and root mean squared error (RMSE)for predicted and measured PPV. To determine the relative influence of each parameter on the PPV, sensitivity analyses were performed for all input parameters. The analyses reveal that ANN performs superior than MVRA and other empirical predictors, andthat83% PPV is affected by distance and MCPD while hole depth, number of blast holes, burden and spacing contribute for the remaining 17%. This research provides valuable insights into improving safety measures and ensuring the structural integrity of buildings near limestone quarry sites.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.10 no.2
• /
• pp.147-153
• /
• 2016

The aims of this study were to evaluate the joint coordination between hip and knee joints in the transfemoral amputees, and its symmetry between sound and prosthetic limbs. Seven transfemoral amputees ($46.4{\pm}10.7-year-old$, $174.8{\pm}3.5cm$, $78.3{\pm}9.7kg$) and 7 able bodies ($24.0{\pm}4.5-year-old$, $174.5{\pm}5.9cm$, $66.9{\pm}9.4Kg$) participated in this study. They walked at a self-selected walking speed across a 10m level ground. Simultaneously angle and angular velocity in the hip and knee joint were measured by motion analysis system. Then continuos relative phase(CRP), standard deviations of CRP (CRP_SD) and symmetry index(SI) were calculated. In able bodies, there were no differences of the parameters between left and right limb(all p>0.05). However, significant differences between sound and prosthetic limb in most of the parameters, except for CRP for stance phase were shown (all p<0.05). There were differences in all SI between transfemoral amputees and able bodies (p<0.05). In conclusion, joint coordination was altered in transfemoral amputee during level walking and shown in interlimb asymmetry.

• Journal of the Korean earth science society
• /
• v.32 no.7
• /
• pp.719-731
• /
• 2011

Based on the ICE-3G and ICE-5G ice models, we predicted the velocities of crustal uplift caused by Glacial Isostatic Adjustment (GIA) at 39 tide gauge sites operated by Korea Hydrographic and Oceanographic Administration (KHOA). We also divided the Korean peninsula in the ranges of $32-38.5^{\circ}N$ and $124-132^{\circ}E$ in $0.5^{\circ}{\times}0.5^{\circ}$ grids, and computed the GIA velocities at each grid point. We found that the average uplift rates due to GIA in South Korea were 0.33 and 1.21 mm/yr for ICE-3G and ICE-5G, respectively. Because the GIA rates were relatively high at ~1 mm/yr when the updated ice model ICE-5G was used, we concluded that the GIA effect cannot be neglected when we compute the absolute sea level (ASL) rates around the Korean peninsula. In this study, we corrected the ICE-5G GIA velocities from the relative sea level rates provided by KHOA and we computed the ASL rates at 13 tide gauge stations. As a result, we found that the average ASL velocity around the Korean peninsula was 5.04 mm/yr. However, the ASL rates near Jeju island were abnormally higher than the other areas and the average was 8.84 mm/yr.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.2
• /
• pp.24-33
• /
• 2017

Domestic urban railway underground station structures, which were built in the 1970s ad 1980s, had been constructed as Cut-and-Cover construction system without seismic design. Because the trends of earthquake occurrence is constantly increasing all over the world as well as the Korean Peninsula, massive human casualties and severe properties and structures damage might be occurred in an non-retrofitted underground station during an earthquake above a certain scale. Therefore, to evaluate the retrofit effect and soil-structure interaction of seismic retrofitted underground station, a centrifugal shaking table test with enhanced stiffness on its structural main member are carried out on 1/60 scaled model using the Kobe and Northridge earthquakes. The seismic retrofitted members, which are columns, side walls, and slabs, are evaluated to comparing with existing non-retrofitted centrifuge test results Also, to simulate the scaled ground using variation of shear velocity according to site conditions such as ground depth and density, resonant column test is performed. From the test results, the relative displacement behavior between ground and structures shows comparatively similar in ground, but is increased on ground surface. The seismic retrofit effects were measured using relative displacements and moment behavior of column and side walls rather than slabs. Additionally, earthquake wave can be used to main design factor due to large structural deformation on Kobe earthquake wave than Norhridge earthquake wave.

• Korean Journal of Plant Resources
• /
• v.21 no.1
• /
• pp.47-51
• /
• 2008

This study was carried out to get the basic data for safflower cultivation according to sowing date by growth analysis for 2 years form 2003 to 2004 at Institute of natural product in Uiseong, G.B.A.R.E.S.. Safflower(Cheongsoo cultivar) was seeded at March 1st, April 1st, May 1st, and July 1st in field. The necessary date for germination was 24 days, when safflower was seeded at March 1st, but it was 8 days which sowed at April 1st and when the seed was sowed at high temperature period, the necessary date for germination was getting short. The necessary date for flowering was the same trend as germination; it took 104 days at March 1st, 79 days at April 1st, 65 days at May 1st, and 58 days at July 1st sowing treatment. The safflower growth was the most vigor when it was sowed at March 1st. T/R(Top/Root) ratio was gently increased during growing season, but when the seed was sowed at July 1 st, it was low compare to sowing at March 1st and April 1st. RGR(Relative growth rate) was the highest during shoot growth stage, but it was rapidly decreased after flowering. CGR(Crop growth rate) was increased at branching stage, and the increasing velocity was slightly decreased just before flowering, and it was increased again at flowering and at this stage, CGR was the highest, and then it did not increased. NAR(Net assimilation rate) was the highest at shoot growth stage during growing season, and was the highest which was sowed at March 1st.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.1 s.94
• /
• pp.20-28
• /
• 2005

This paper addresses uncertainty issues encountered recently in measuring head vibration using the conventional 6-axis or 9-axis bite-bar model. Those conventional bite-bar models are shown to present insufficient information to evaluate a generalized motion of head vibration. In order to overcome such limit, a new theoretical measurement model that consists of four 3-axis linear accelerometers is suggested. It is shown to enable the measurement of three angular acceleration components and six second-order angular velocity-dependent terms. Those nine angular motion-related ones, in addition to the three linear acceleration terms at the origin, are found to make it possible to evaluate the generalized head vibration for a given position. To examine the feasibility of the proposed method, a newly designed 12-axis bite-bar was developed. Detailed experimental results obtained from the developed 12-axis bite-bar are demonstrated in this paper. They illustrate that the popular 6-axis bite-bar model yield about $4.0\%$ relative measurement uncertainty for the pitch component of head vibration, $14\%$ and $10\%$ relative measurement uncertainty for the roll and yaw components of head vibration, respectively. Furthermore, this paper proposes other uncertainty factors to be considered in the future.

• Journal of Conservation Science
• /
• v.26 no.3
• /
• pp.277-294
• /
• 2010

The Seosanmaaesamjonbulsang (National Treasure No. 84) consists of light gray and coarse to mediumgrained biotite granite with partly developed pegmatite and quartz vein. The host rock is divided into dozens of rock blocks with various shape along irregular discontinuity plane. The evaluation results of discontinuity systems reveal that the host rock were exposed to instable sloping environments. Results of deterioration diagnosis show that the degree of damage has been made worse by physical weathering and surface discoloration laying stress on part that vertical and horizontal joints are massed. Generally, deterioration rate of the triad Buddha surface cover with 42.7%, however, the rate of physical weathering and surface discoloration are subdivided to 9.6% and 33.1%, respectively. Ultrasonic measurements indicate that the triad Buddha was reached highly weathered grade in general. And the rock material was weaken to show low velocity zone of 1,000m/s along irregular joint systems. Indoor and outdoor mean relative humidity of the shelter was recorded more than 70% during every season, and high frequency appears in high relative humidity range over 95%. Such environments seem to have produced dew condensation on the rock surface with rainfall and supply water, promoted physical, chemical and biological weathering along crack and joint, resulting in high permeation of water and percentage of water content. Therefore, it is judged that for scientific conservation of the triad Buddha it needs environment control through persistent preservation environment monitoring including water problem.

• Journal of Bio-Environment Control
• /
• v.8 no.1
• /
• pp.49-55
• /
• 1999

This study aims at analyzing environment factors of two tier cropping systems and suggesting effective structures of two tier cropping systems. The environment factors in two tier cropping systems are temperature, relative humidity, solar radiation, temperature of nutrient solution, and wind velocity. Especially, The most important factors are the solar radiation and the solar incident area between the two tiers. During the experiment, observations were made of the two levels in the plastic greenhouse. The highest temperatures were 38.3$^{\circ}C$ in the top level and, 35.5$^{\circ}C$ in the bottom level, respectively. The temperature of the nutrient solution between the two levels showed little difference. The relative humidity in the top level was 60~7o% and that in the bottom 65~80%, exhibiting that the bottom is approximately 10% higher. Change of photosynthetic photon flux density and solar radiation both have a tendency to be similar. The wind velocities for both levels were recorded at 0.1m.s$^{-1}$ in the afternoon and 0.05m.s$^{-1}$ in the evening. The solar incident areas in the bottom level increased by approximately 25% at an East-West position and 17.7% at a South-North position, respectively.