• 한국콘텐츠학회논문지
• /
• 제15권8호
• /
• pp.556-563
• /
• 2015

본 연구의 목적은 스탠스 폭에 따른 신체의 좌우방향 이동에 대한 동작을 비교, 분석하는데 있다. 이를 위해 남자 대학생 7명(평균 신장 $174.9{\pm}4.8cm$, 평균 체중 $70.9{\pm}6.6kg$)이 실험에 참여하였다. 실험을 위해 고속카메라 9대와 지면반력기 2대가 이용되었으며, 두 가지의 스탠스 폭은 좁은 보폭(평균 42.9cm)과 넓은 보폭(평균 65cm)으로 제한하여 실시하였다. 실험을 통해 다음과 같은 결론을 얻었다. 첫째, 좁은 보폭이 양발이 착지 후 오른발이 이지하는 순간까지, 즉 추진 구간의 소요시간에서 유의하게 짧은 시간이 소요되었다. 둘째, 스플릿 스텝 후 오른발 이동 변위는 좁은 보폭이 유의하게 길게 나타났다. 셋째, 신체무게중심 속도는 오른 발 이지 시와 최대 속도에서 두 보폭 간에 유의한 차이가 나타나지 않았다. 넷째, 오른발 이지시 엉덩관절과 무릎관절의 각도는 좁은 보폭의 각도가 유의하게 더 크게 나타났다. 다섯째, 오른발 이지시 지면반력 값은 두 보폭 간에 유의한 차이가 나타나지 않았다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제43권4호
• /
• pp.235-242
• /
• 2020

Scanogram is that combine several practical images into one image to observation. So it is an important consideration in many clinical situation such as iliac measurement, leg alignment measurement and Scoliosis. Currently, scanogram examinations are mainly conducted for children and elderly patients. In this study, in order to apply the longbone detector to children or elderly patients who are difficult to cooperate with, we compared the longbone detector from D equipment with the G equipment discovery 656 Puls equipment in reproducibility of images, distribution of irradiation dose, scattering dose, irradiation time and image acquisition time. D equipment took more than twice as much time as G equipment. The scattered dose generated about 50% more G equipment than D equipment. In the whole spine scanogram and the measurement length of the lower leg, D equipment was also measured longer than G equipment. However, both methods did not show much difference from the CT scanogram, so there was no problem in measurement. The height of the thyroid radiation dose of G equipment was produced more radiation than D equipment. However, the longbone detector deviated from the x-ray center line relative to the tube rotation method, and was measured lower by the directionality of the measuring instrument, so that the error could not be corrected. In the conclusion of study, using the longbone detector is excellent for applying to children or elderly patients to reduce scattering dose. However, using CR may be useful to normal patients. Because, the image quality may deteriorate due to an imbalance of dose difference in thickness depending on the body part. So, it is useful to using a compensation filter or tube rotation method when we take a whole spine scanogram.

• 한국해안·해양공학회논문집
• /
• 제20권1호
• /
• pp.49-61
• /
• 2008

본 연구에서는 직립벽을 따른 불규칙파의 연파특성을 평면수조를 이용한 수리모형실험과 Kirby and Ozkan(1994)에 의해 개발된 REF/DIF S 모형을 이용한 해석결과를 통해 검토하였다. 본 연구에서는 불규칙파에 의한 연파특성, 규칙파 및 불규칙파에 의한 차이점과 유사점을 검토하였다. REF/DIF S모형에 의한 불규칙파의 연파 해석결과는 수리실험결과와 잘 일치하였다. 제체 전면을 따른 상대파고는 규칙파 및 불규칙파 모두 유사하게 나타났으나, 제체 직각방향의 파고분포 경향은 매우 큰 차이를 보였다.

• 한국농공학회지
• /
• 제23권2호
• /
• pp.35-44
• /
• 1981

This experiment was conducted to find out the consumptive use of irrigated water for calculation of duty water in paddy rice. Tall statured Japonica rice varieties, Nongbaek (early), Jinheung (medium) and Akibare (late), and short statured Tongil typed varieties, Josaeng Tongil(early), Suweon 264 (medium) and Suweon 258(late) were planted on the experimental farm of Kon-Kuk University in 1979. The results obtained in this study were as follows: 1. During the experimental period, the daily mean temperature was almost similar, the relative humidity was higher as much as 2.8%, the amount of rain fall was 100mm less and the pan evaporation was 70mm less compared with those of 30 years average, respectively. 2. The paddy soil was silty loam, which was suitable for the rice cultivation. 3. Varietal differences were find out for plant height, culm length, number of tillers, number of panicles, heading date, matured grain ratio, 1000-grain weight and rough rice yield. This difference might he the cause of varietal difference of the consumptive use of irrigated water during the rice growing period. 4. The evapotranspiration was gradually increased after transplanting and showed the peak from booting to heading stage of rice varieties. The average evapotranspiration through the whole growing period was 5.67-5. 80mm/day for tall statured Japonica varieties, and 5.99-6. 39mm/day for short statured Tongil typed varieties. 5. The ratio of evapotranspiration to pan-evaporation through the whole growing period was 1.49-1.50 for Japonica varieties, and 1.60-1.66 for Tongil typed varies. 6. Average amount of percolation in paddy field was 3. 62mm/day through the whole growing period of rice plant. 7. K-value in Blaney & Criddle formula was 0.94-0.98 for Japonica varieties and 1.02-1.08 for Tongil typed varieties, and coefficient consumptive water use (Kc-value) was 0.95-1.02 for Japonica varieties and 1.04-1.12 for Tongil typed varieties in this study. The modified coefficient for consumptive water use, which was calculated from data collected through the country including this study, was as follows;

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2022년도 추계학술대회
• /
• pp.52-52
• /
• 2022

Recently, PE (polyethylene) film has been used increasingly in com cultivation. However, PE films often cause soil and environment contamination. In order to reduce this problem, many researches have been carrying out studies on biodegradable films (BF) that are easily decomposed by soil microorganisms. Therefore, this study was conducted to determine which BF is optimal for growth and yield of com crops while also having the highest rates of film decomposition. BFs Farmsbio (Farm Hannong), Heulgro Film (Sejin Bio), Vonto Film (Eco-Hansung) as well as a selected PE film were used in this study. For the control, we used crops grown without any kind of mulching. Experimental fields were fertilized according to conventional cultivation methods, tilled, and then covered by either BF or PE. After 1 week, com (cv. MIBECK2ho) at the 3-leaf stage (16 days after seeding) was transplanted. Plant height was measured at 18 and 32 days after transplanting and heading stages. Yield components and yield were also measured at harvest. In addition, pH, EC, and decomposition and light transmittance levels of films were investigated during the experimental period. Daily average temperature, relative humidity and organic matter in soils were also measured during the experimental period. There was no significant difference in plant height, heading date, and silking between crops with BFs and PE, but the crops grown with BFs and PE films reached higher growth parameters in a shorter amount of time than the crops in the non-mulching control. Additionally, there were no significant differences in yield components such as length of ears, ear width, ear weight, and yield in crops that were grown using films or crops in the control plot. Light transmittance and decomposition levels of films generally increased with time after transplanting, and was highest in the Heulgro film than other BFs. Soil pH and organic matter in crops using BFs and PE films were significantly higher than in the control plot at 99 and 113 days after transplanting. In general, the EC contents in the control plot was lower than in crops using BFs and PE films. The average daily moisture in soil was higher when BFs and PE films were used than in the control plot. However, the daily average soil temperature was higher in crops using BFs and PE films than in the control plots at the beginning of the experimental period, but there was no consistent difference in soil temperature towards the later part of the experimental period. Therefore, the BFs used in this study were shown to be helpful without causing negative impacts on the growth and yield of com.

• 대한치과교정학회지
• /
• 제9권1호
• /
• pp.85-98
• /
• 1979

This investigation was designed to compare the craniofacial and dental morphology of class III malocclusion with that of normal occlusin in children, and to determine the incidence of various class III craniofacial skeletal patterns. The material selected for this study consisted in standard lateral cephalograms of eighty two Korean children, forty one boys and forty one girls, aged 10 through 12 years, having class III malocclusion, and forty two Korean children, twenty boys and twenty two girls, with normal occlusion in the same age. Using the tracings of the standard lateral cephalograms, various angular and linear measurements were recorded, tabulated and statistically analyzed, and then the class III craniofacial skeletal morphology was divided into various patterns by the degree of SNA and SNB, which respectively were below, within or beyond the normal range of those of normal occlusion. The following characteristics of the craniofacial and dental morphology of class III malocclusion were observed. 1. The cranial base length of class III malocclusion was smaller than that of normal occlusion, and the small saddle angle was a characteristic figure of class III malocclucion. 2. Maxillary length of class III malocclusion was smaller than that of normal occlusion, and point A was retropositioned relative to cranial base but not PNS in class III malocclusion. Maxillary base inclination was not significantly different between the two, but occlusal plane to palatal plane was small in class III malocciusion. 3. The mandibular body length shown no difference between the two, but the mandibular body positioned anteriorly relative to cranial base in class III malocclusion. Ramus height, gonial angle, and mandibular effective length were large in class III malocclusion. Mandibular plane angle and joint angle had no difference between the two, and occlusal plane to mandibular plane angle was large in class III malocclusion. 4. Maxillary incisor inclination was not significantly different between class III malocclusion and normal occlusion, but mandibular incisors positioned and inclined lingually and consequently interincisal angle was large in class III malocclusion. 5. Class III malocclusion was divided into six categories of craniofacial skeletal pattern. The most common class III pattern was found to be one in which the maxilla was within the normal range of prognathism while the mandible extended beyond this range. The pattern in which the maxilla was below the normal range of prognathism while the mandible was within this range was approximately one fifth of the class III sample.

• 생물환경조절학회지
• /
• 제16권4호
• /
• pp.291-296
• /
• 2007

이 연구는 순환팬에 의해 만들어지는 수평적인 공기흐름이 환경요인들의 수평 및 수직분포에 미치는 영향을 조사하기 위해 수행하였다. 순환팬 가동 유무에 따라 기류 속도, 기온, 상대습도 및 $CO_2$농도의 3차원 분포를 측정하였다. 온실내 기상인자 분포의 균일성은 외기온이 낮아짐에 따라 감소하였다. 무처리시 기온 편차는 4.7, 습도 편차는 19%이었는데 팬을 가동한 경우 그 편차들은 각각 2.2, 6.3%로 감소하였다. 팬 용량이 증가할수록 측점간 기온 편차가 줄어들었는데, 온실 바닥면적당 $0.0104m^3{\cdot}s^{-1}$ 용량의 팬으로 온실내 적정한 공기 유동을 만들 수 있었다. 기온 및 $CO_2$ 농도의 수직분포는 높이나 팬 용량에 관계없이 상당히 균일한 것으로 나타났다. 폭 방향의 기온 편차를 줄일 수 있는 팬 배치와 소용량의 팬을 다수 설치했을 때의 효과에 대한 연구가 더 필요할 것으로 생각된다.

• 대한기계학회논문집 C: 기술과 교육
• /
• 제2권1호
• /
• pp.47-55
• /
• 2014

본 연구에서는 태양열에 의해 증발된 해수면에서의 수증기를 응축의 원리를 이용하여 담수의 생산이 가능한 친환경 담수장치(Eco-friendly Desalination System)를 고안하고, 가능성을 판단하는데 연구의 목적을 두고 있다. 응축 열전달 공식을 이용하여 습공기의 물성변화에 따른 연간 응축수 생산량을 예측하였으며, 항온항습챔버의 실험을 통해 실제 습공기조건 변화에 따른 응축량을 측정하였다. 습공기의 이론 응축률과 실험을 통해 측정한 실제 응축률의 오차율을 산출하였으며, 오차의 원인을 분석하고 응축률 보정계수인 응축계수와 점성계수를 구하여 보정된 이론 응축률 공식에 도출하였다. 보정된 응축률 식을 이용하여 설계된 규모의 풍력터빈연간 생산 가능한 담수량을 산출한 결과 최대 연간 약 2,927톤 정도의 담수를 생산할 수 있다는 사실을 알 수 있었다.

• Journal of Preventive Medicine and Public Health
• /
• 제22권3호
• /
• pp.355-367
• /
• 1989

This study examined the physical and mental health factors affecting the industrial accidents of 142 injured and 1,212 uninjured workers in the shipbuilding industry from 1986 to 1988. The results acquired from the Todai Health Index (THI) and from analysis of the health examination were as follows: 1. Among the personal characteristics of the workers, the educational level of injured workers was significantly lower than that of the uninjured workers. 2. Among the physical characteristics, vision and $R\ddot{o}hrer$ Index of the injured workers were lower than those of the uninjured workers, and the difference was statistically significant. On the other hand, the differences in height, weight, hearing function, hematocrit, blood pressure, urine test, and X-ray findings were not statistically significant between the injured and uninjured workers. 3. The score of the THI questionnaire on the physical and mental health of the injured workers was higher than that of the uninjured workers, and the difference was statistically significant. 4. Form the THI score, the industrial workers had complained more about mental health than physical health and there was a statistically singinficant relation with the industrial accidents. 5. The relative risk expressed in terms of the odds ratio was 2.9 for poorer vision, 2.7 for a lower educational level, 2.2 for a higher THI score and 1.6 for overdrinking. 6 Educational level, vision, and the THI score were selected as significant factors influencing industrial accidents based on a log-linear model. According to the results of this model by logistic analysis, the odds ratio of industrial accidents was 1.8 for a lower educational level, 1.7 for poorer vision, and 1.6 for a higher THI score. 7 By event history analysis with the dependent variable as the duration of work at the time of the industrial accident, educational level, age, $R\ddot{o}hrer$ Index and THI score were the statistically significant variables selected, and the hazard rate of industrial accident occurrence was 0.24 for a lower educational level, 0.92 for age, 0.99 for a lower $R\ddot{o}hrer$ Index and 2.72 for a higher THI score. As we have seen, educational level and THI score were the most significant factors affecting the hazard rate of industrial accidents. Vision, $R\ddot{o}hrer$ Index, age, and drinking behavior were also statistically significant variables influencing industrial accidents. Therefore, in order to prevent industrial accidents, it is necessary to establish a health management plan for industry which can objectively evaluate not only the physical but also the mental health of the workers. If we use this type of study as a prospective study design, we can determine the relative risk of physical and mental health factors on industrial accidents. Furthermore, it is expected that this type of study will provide workers at high risk with more precise basic data for a health managment plan for industrial accident prevention.

• 한국산림과학회지
• /
• 제85권4호
• /
• pp.596-604
• /
• 1996

본 연구는 표고재배기술의 단계별 관리방법을 제시하며, 활착율 증대를 통하여 양질의 버섯생산을 도모하여 생산성을 향상시키는데 목적이 있다. 현지 재배자를 대상으로 재배현황에 대한 실태조사를 실시하여 재배현황을 분석하였고, 이를 토대로 현지 재배환경을 위주로 표고 종균활착율 향상과 재배 관리에 관하여 실험한 결과는 다음과 같다. l. 실태조사결과 많은 재배자가 활착촉진을 위한 재배관리에 등한히 하는 경우가 많았는데, 이는 노동력의 부족과 자본의 부족 그리고 재배관리 요령에 익숙하지 못한 이유 등이었다. 2. 원목내 수분함량은 3월 12일 l차 접종분이 28.63%, 3월 25일 2차분은 25.20% 그리고 4월 10일의 3차분은 23.19%로 점차 감소하였다. 종균의 활착에 적절한 원목내의 수분함량을 확보하며 활착증진과 노동력의 분산을 위해서는 3월 초부터 접종하는 편이 유리하였다. 3. 종균별 활착율은 10월 20일의 활착율조사에서 고온성은 모리465가 100%, 모리3046이 98.98%, 저온성에서는 모리290이 98.97%였다. 상대활착율은 고온성에서 모리465가 97.70%, 모리3046이 82.45%. 저온성에서는 모리290이 88.87%로 나타났다. 본 종균은 높은 활착율로 재배자들이 선호하는 품종으로 상대활착율에서 차이를 보여, 재배자의 종균선택에 유의하여야 할 부분으로 판단된다. 4. 접종시기별 활착율은 고온성 모리465와 저온성 모리290을 접종하여 고온성의 경우, 활착율은 1차(3월 중순) 100.0%, 2차(3월 하순) 98.98% 그리고 3차(4월 상순)에 96.79%로 약간의 차이를 나타냈고, 상대활착율은 1차가 97.70%, 2차 82.45% 그리고 3차가 8l.42% 순이였다. 저온성의 경우, 활착율은 1차가 99.09%, 2차가 98.97% 그리고 3차가 97.89%로 별차이가 없었으며, 상대활착율은 1차가 93.27%, 2차가 89.67% 그리고 3차가 88.87%로 나타났다. 접종시기가 빠를수록 활착율에서는 비교적 차이가 없었으나 상대활착율의 경우는 차이를 보였는데, 우리재배자의 접종시기가 3차인 4월에 집중되어 있는 점을 감안 한다면 앞으로의 접종시기는 조기접종인 3월초에 실시하도록 하여야 할 것으로 판단된다. 5. 가눕혀두기시 위치별로 골목내의 수분함량을 측정한 결과, 상단부일수록 수분함량이 낮아 가눕혀두가시 쌓는 높이결정에 있어서는 가능한한 60cm를 넘지 않도록 하여야 할 것으로 판단된다.