• 한국운동역학회지
• /
• 제22권3호
• /
• pp.305-314
• /
• 2012

The purpose of this study was to investigate the effects of joint kinetics and coordination on within-individual differences in maximum vertical jump. 10 male subjects aged 20 to 30 performed six trials in maximum vertical jump and with based on jump height the good(GP) and bad(BP) performances for each subject were compared on joint kinetics of lower extremity and coordination parameters such as joint reverse and relative phase. The results showed that maximum moment, power, and work done of hip joint and maximum moment of ankle joint in GP were significantly higher than that in the BP but no significant differences for the knee joint. We could observe a significant difference in joint reverse timing between both conditions. And also the relative phase on ankle-knee and ankle-hip in GP were significantly lower than that in the BP, which means that in GP joint movements were more in-phase synchronized mode. In conclusion, mechanical outputs of hip and ankle joints had an effect on within-individual differences in vertical jump and the inter-joint coordination and coordination including sequence and timing of joint motion also might be high influential factors on the performances within individual.

• 한국수산과학회지
• /
• 제5권1호
• /
• pp.17-22
• /
• 1972

본 시험은 일본 Miyagi Ken 굴 연구소에서 1969년 채묘된 O. lurida 및 C. angulata를 항공편으로 우송하여 1970년 1월 20일부터 12월까지 경남 거제군 하청면 연구리 옥계지선에서 수하식으로 성육시켜 조사한 것이며 그 결과는 다음과 같다. 1. O. lurida는 평균 각고 36.4mm 각장 29,5mm인 둥근모양으로서 소형굴로 자랐고, C. angulata는 각고 87.4mm, 각장 52.3mm인 타원형으로서 대형굴 형태로 성장했다. 2. O. lurida, C. angulata는 다같이 수온이 $16^{\circ}C$ 이상일 때 6, 7월시에 성장도가 좋았으며, 이때의 비중은 $1.01717\~1.02368$ 사이였다. 3. 각고 각장간의 상대적인 변화는 O. lurida는 년간 큰 차가 없었으나, C. angulata는 7월에서부터 현저한 차를 이루어 11월에 35.8mm로 그 차가 가장 컸다. 4. 치사율은 O. lurida는 $35.2\%$였으며, C. angulata는 $21.7\%$를 나타냈다.

• Journal of the Korean Wood Science and Technology
• /
• 제36권1호
• /
• pp.12-20
• /
• 2008

국내에서 성장한 주요 침엽수 3종(소나무, 잣나무, 리기다소나무)의 수간 내 셀룰로오스 상대결정화도와 결정폭에 대한 수평방향 및 수직방향 변이를 X선 회절법에 의해 조사하였다. 각 수종의 상대결정화도 평균값은 소나무 60.6%, 잣나무 61.7%, 리기다소나무 49.4%로 리기다소나무가 가장 낮게 나타났다. 공시 수종의 상대결정화도는 약 10~15연륜까지 증가하다가 그 후 거의 일정한 값을 보여 주었고 만재부의 상대결정화도가 조재부의 상대결정화도보다 다소 높게 나타나는 경향이 있었다. 소나무 상대결정화도는 수관부보다 기부에서 다소 낮게 나타났으나 잣나무, 리기다소나무는 수고에 따른 차이를 거의 나타내지 않았다. 각 수종의 셀룰로오스 결정폭은 3수종 모두 2.8~3 nm 정도로 거의 차이가 없었고 수평방향 및 수직방향, 조만재 간에도 차이가 없었다. 따라서 상대결정화도와 결정폭 중 상대결정화도는 국내산 주요 침엽수재의 미성숙재와 성숙재를 구분하는 재질 지표의 하나로 이용이 가능할 것으로 생각되었다.

• 대한원격탐사학회지
• /
• 제33권6_2호
• /
• pp.1151-1157
• /
• 2017

가로수는 도시 환경 개선을 위한 중요한 개체이다. 특히 도시 협곡에서 가로수 높이는 대기 오염물질의 제거에 큰 영향을 미치는 요소로써 높이를 정확히 측정해야할 필요가 있다. 본 연구에서는 수목의 높이 측정을 위해 대상지역의 무인항공기 영상을 정밀하게 보정하여 스테레오 영상 기반으로 수목의 높이를 추출하는 방식을 시도해보았다. 무인항공기의 영상 정렬은 공선방정식 기반의 SfM(Structure from motion) 방식을 적용하였으며 보정된 영상을 수치도화기에 적용하여 도시 협곡지역의 가로수 높이를 측정하였다. 가로수와 인접 건물의 높이를 함께 취득하였으며 정확한 지물의 높이 계산을 위해 도로면의 평균높이를 함께 산출하여 처리하였다. 그 결과로 수목의 높이 측정 및 건물과의 상대적인 높이값 차이 산출을 수치도화기를 이용한 육안 분석을 통해서 빠르게 할 수 있음을 확인하였다. 이는 무인항공기를 이용하여 별도의 3차원 포인트 클라우드를 제작하지 않고도 건물과 수목의 상대적인 높이 차이를 산출할 수 있음을 의미한다. 또한 비전문가도 활용할 수 있다는 장점이 있다. 향후 사용자가 영상 내 수목이나 건물의 한 지점을 선택하면 자동으로 해당 개체의 높이값을 추출하는 연구 및 영상에서 자동으로 수목을 추출한 뒤 수고가 함께 취득되는 연구가 수행되어야 하며, 이러한 기술의 개발 및 연구는 이후 도심지내 환경 정책 및 가로수 등의 현황파악에 도움이 될 수 있을 것으로 기대된다.

• The Korean Journal of Ecology
• /
• 제27권3호
• /
• pp.147-153
• /
• 2004

본 연구는 카드뮴 처리에 대한 박달나무 유묘의 가계간 생장 차이와 광합성 특성을 구명하고자 실시하였다. 카드뮴 처리는 3가계의 박달나무 1년생 묘목에 0, 0.4, 0.8mM의 CdSO4 · H2O 용액을 이용하여 3수준으로 2개월간 실시하였다. 박달나무의 가계간 및 처리간 생장과 생리적 반응은 건중량, 상대생장율, 순양자수율 및 탄소고정효율을 이용하여 결정하였다. 0.4 mM과 0.8mM 카드뮴이 처리된 박달나무 유묘는 대조구와 비교해서 건중량과 상대생장율이 크게 감소하였으며, 박달나무 유묘의 생장 감소는 광합성 능력의 감소에 큰 영향을 받은 것으로 나타났다. 또한 순양자수율과 탄소고정효율은 카드뮴 처리로 감소하였으며, 모든 가계에서 카드뮴 농도가 증가함에 따라 감소 폭이 커졌다. 한편 카드뮴 처리에 의한 생장과 광합성 반응은 박달나무 가계간 뚜렷한 차이를 보여 카드뮴 내성은 가계간 유전적 요인이 작용하고 있음을 확인하였다.

• 한국환경과학회지
• /
• 제23권6호
• /
• pp.1075-1083
• /
• 2014

The objective of this study was to evaluate the effect of cutting types on microclimate and growth characteristics of afforested tree in Quercus acutissima stand after different types of cutting. The difference in temperature reaching $5.2^{\circ}C$ was shown in between clear cutting and selective cutting treatments. On July and August days with temperatures more than $35^{\circ}C$ often appeared in clear cutting stand. The values of VPD in July and August were higher than those in other months. Maximum VPD of 3.99 kPa was shown in clear cutting stand on May 23 as a prolonged rainless days appeared. However, VPD in selective cutting stand always stayed under 3.0 kPa throughout growing season. A higher intensity was shown in clear cutting and strip clear cutting stands, reaching to more than $1,600{\mu}mol\;m^{-2}s^{-1}$ at midday on early August, while that in selective cutting stand stayed about 1,500. In relative growth rate selective cutting stand showed a significantly higher relative growth rate in plant height than those in other cutting stands (p<0.05). The number of leaf in current-year branches significantly increased in selective cutting stand, whereas no increase was shown in clear cutting and strip clear cutting stands (p<0.05). In addition, relative elongation rate of current year branch also showed higher values in selective cutting stand compared with that in strip clear cutting stand (p<0.05). However, leaf mass per unit area (LMA) was higher in order of strip clear cutting, clear cutting, and selective cutting stands. From these results it is concluded that environmental conditions in clear cutting and strip clear cutting stands during growing season are more stressful to afforested tree species, resulting in lower relative growth in plant height, elongation of current-year branches, and leaf number per branch compared with those in selective cutting stand. Consequently, more data must be accumulated in the field to find out best cutting type in plantation considering the adaptational characteristic of each tree species varies with species and life span of tree is long.

• 한국초지조사료학회지
• /
• 제37권3호
• /
• pp.201-207
• /
• 2017

Hay-making is one of the most common forage preservation practices in livestock operations. The objective of hay-making is to minimize nutrient loss by shortening field drying time. Measuring the impacts of cutting height of forage crop is necessary to optimize hay production balancing yield and quality, in order to obtain substantial biomass increase through harvest of regrowth. This experiment was conducted to investigate the impact of cutting height of rye (Secale cereale L.) on drying rate and hay quality. Heading stage rye was harvested at 8cm or 15cm stubble heights. Hay was daily tedded at 09:00 and sampled at 09:00, 13:00 and 17:00 to determine moisture content (MC). After two month of preservation, CP (crude protein), ADF (acid detergent fiber), NDF (neutral detergent fiber), IVDMD (in vitro dry matter disappearance), TDN (total digestible nutrient), RFV (relative feed value), DM (dry matter) loss, visual scores and total fungi count were determined for estimation of hay quality. Cutting height at 15cm could enhance the drying rate and CP content (p<0.05), but also increases DM loss (p<0.05) compared to cutting at 8cm. Cutting heights did not affect ADF, NDF, IVDMD, TDN and RFV value (p>0.05). Visual scores of rye hays cutting at 8cm and 15cm, ranged from 83 to 85. Cutting at 8cm tended to maintain higher core bale temperature and fungal count than cutting at 15cm during preservation, but there was no significant difference.

• 한국초지조사료학회지
• /
• 제41권3호
• /
• pp.147-154
• /
• 2021

Cutting management has been identified as a critical factor in the alfalfa production systems because it has a significant impact on maximizing yield and maintaining the forage quality. The objective of this experiment was to determine the proper cutting height according to harvesting time for optimizing nutrient yield and forage nutritive quality of alfalfa grown in alpine regions of Korea. Alfalfa was sown at a seeding rate of 30 kg/ha in August 2018 and harvested at four cuttings in 2019 (3 May, 2 July, 11 September, and 13 October). Cutting heights were adjusted at 5, 15, and 25 cm above the soil surface. Alfalfa plant was tallest at the third cutting (109 cm), which was on average 35 cm taller than the first or second cutting. Relative feed value (RFV) remained unaffected by cutting height at the first harvest, but increased consistently in subsequent harvests as cutting height increased. Alfalfa collected at the first and fourth cuttings had the highest RFV (mean 152), which was on average 8 and 67 units higher than the second and third harvests, respectively. At each harvest, in vitro dry matter digestibility was highest in alfalfa cut at a 25-cm height. Dry matter (DM) production at each cutting height was highest in the first cutting, accounting for on average 36-37% of total annual DM production, and lowest in the fourth harvest, accounting for about 11-13% of the total DM yield. The total dry matter production (in four harvests) was 4,218 kg/ha higher when alfalfa was subjected to a cutting height of 5 cm rather than 25 cm. Cutting height had no effect on total crude protein yield, but from the first to fourth cutting, the protein yield followed a decreasing trend. Finally, there were visible declines in forage nutritive quality when alfalfa was cut at a shorter height. However, the magnitude of difference in total forage yield may outweigh the slight decline in forage quality when alfalfa is cut at a lower height. The findings of this study could help the alfalfa growers make better harvest management decisions.

• 대한토목학회논문집
• /
• 제33권6호
• /
• pp.2343-2350
• /
• 2013

본 연구에서는 불규칙파를 대상으로 한 경사입사파 내습시 유공구조물 전면에서의 파고분포를 파악하기 위해 평면수조를 이용한 수리실험을 수행하였다. 본 연구는 파랑의 전파특성에 있어 무공구조물과 유공구조물의 차이점과 유사점에 대해 검토하였으며, 특히 유공구조물의 유수실 폭과 유수실내 격벽의 효과에 대해 검토하였다. 제체 전면의 상대파고는 유공구조물인 경우와 무공구조물인 경우에 매우 큰 차이가 있음을 보였으며, 유수실내 격벽은 연파의 발달을 억제시키는 것으로 나타났다.

• 대한기계학회논문집A
• /
• 제25권7호
• /
• pp.1047-1054
• /
• 2001

Atomic Force Microscope (AFM) was used to study cross sectional profiles and dimensions of fatigue striations in 2017-T351 aluminum alloy. Their widths(SW) and heights (SH, SH(sub)h, SH(sub)ι) were measured from the cross sectional profiles of three-dimension AFM images. The following results that will be helpful to understand the fatigue crack growth mechanism were obtained. (1) The relation of SH=$\alpha$(SW)(sup)1.2 was obtained. (2) The ratio of the striation height to its width SH/SW, SH(sub)h/SW and SH(sub)ι/SW did not depend on the stress intensity factor range ΔK and the stress ratio R( =P(sub)min/P(sub)max = K(sub)min/K(sub)max). (3) Effect of precipitate on the morphology of striation was changed by the relative dimensional difference between the striation width SW and the precipitates. From these results, the applicability of the AFM to nano-fractography is discussed.