• 제목/요약/키워드: reject ash

검색결과 28건 처리시간 0.022초

리젝트애쉬를 사용한 콘크리트 특성 (The Properties of Concrete with Reject Ash)

  • 백철우;김호수;박조범;류득현
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
    • /
    • pp.481-484
    • /
    • 2006
  • The purpose of this study is to present the recycling method of reject-ash. The reject-ash, a significant portion of the pulverized fuel ash produced by coal-fired power plants and rejected from the ash classifying process, has remained unused due to its high carbon content and large particle size. This study compared reject-ash with fly-ash by physical properties, the properties of fresh & harden concrete with cement replacement ratio of reject-ash and fly-ash, 0, 5, 10, 15, 20, 25(wt. %). The loss of ignition of the reject-ash is similar to fly-ash and is suited to the KS L 5405. When the replacement ratio of reject-ash is increasing the air content of reject-ash concrete is lowly decreased. The results of the compressive strength measurement of reject-ash tends to decrease by increasing the replacement ratio.

  • PDF

혼합골재에 리젝트애시를 프리믹스하여 활용하는 시멘트 모르타르의 공학적 특성 분석 (Analyzing the Engineering Properties of Cement Mortar Using Mixed Aggregate with Reject Ash)

  • 한천구;박병문
    • 한국건설순환자원학회논문집
    • /
    • 제5권3호
    • /
    • pp.247-252
    • /
    • 2017
  • 본 연구는 Reject Ash(Rj)를 혼합골재에 프리믹스하여 활용함에 따르는 가능성을 분석한 것이다. 즉, 서로 다른 입자특성의 저품질 잔골재인 석산 B+해사(CSb+SS), 발파석+해사(BS+SS)의 혼합골재에 대한 Rj의 치환율 변화에 따른 시멘트 모르타르의 기초적 특성을 파악하고자 하였다. 실험결과, 먼저 플로는 CSb+SS의 경우 Rj의 치환율이 증가함에 따라 거의 변화가 없었으며, 공기량은 CSb+SS와 BS+SS의 경우 모두 Rj의 치환율이 증가함에 따라 감소하는 것으로 나타났다. 압축강도는 CSb+SS와 BS+SS의 경우 모두 Rj의 치환율이 증가함에 따라 증가하는 것으로 나타났다. 따라서 혼합골재에 Rj를 5% 정도 치환할 경우에 품질이 양호한 골재를 사용한 경우와 유사한 것으로 판단되며, 5% 이상 치환할 경우에도 콘크리트의 유동성 확보 및 강도증진에 긍정적으로 기여하게 됨을 확인할 수 있었다.

고분말 리젝트애시를 혼입한 시멘트복합체의 기본물성에 관한 연구 (Fundamental Physical Properties of Cement Composites Containing Fineness Reject Ash)

  • 이강필;홍만기;이상수;송하영
    • 한국건축시공학회지
    • /
    • 제11권4호
    • /
    • pp.363-370
    • /
    • 2011
  • 본 연구에서는 화력발전소에서 발생하는 폐기물인 리젝트 애시를 자원화하기 위하여 시멘트 혼합재로 사용하는 방안을 검토하고자 하였다. 이를 위하여 포졸란 활성도 비교를 통하여 효율적인 리젝트애시의 분말도를 선정하였으며, 현재 널리 사용되고 있는 콘크리트용 혼합재인 플라이애시와 비교하였다. 고분말 리젝트애시와 플라이애시를 슬래그시멘트와 혼합하여 시멘트복합체를 제조하였으며, 제조한 시멘트복합체 및 고분말 리젝트애시의 성능 평가를 위하여 페이스트(응결, 유동성, 기기분석), 모르타르(압축강도) 실험을 실시하였다. 기기분석 결과 고분말 리젝트애시의 수화반응기구는 플라이애시와 유사하지만 미세조직이 치밀해지는 특성을 나타내었다. 물성 측정결과에서는 고분말 리젝트애시가 플라이애시와 비교하여 응결지연이 감소하고, 초기강도 및 장기강도에서 우수한 성능을 나타내었다. 따라서 리젝트애시의 분말도를 $6,000cm^2$/g 수준으로 상향시킨다면 시멘트 복합체에 활용하는 것이 가능하며, 시멘트 물성 향상에도 기여할 수 있을 것으로 예상된다.

고유동 CLSM를 위한 Reject Ash 및 순환 잔골재의 활용성 검토 (The Investigation of Application of Reject Ash and Recycled Fine Aggregate to High Flowing CLSM)

  • 송용원;윤섭;김정빈;정용;박찬규;이승훈
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
    • /
    • pp.403-404
    • /
    • 2009
  • 본 연구는 CLSM(Controled Low-Strength Materials)의 고유동화에 필요한 분체량과 경제적을 고려하기 위하여 산업부산물인 Reject Ash의 사용량 변화와 순환모래(고품질, 저품질)와 부순모래, 공기량 변화에 따른 CLSM의 물리적 특성을 분석하여 고유동 CLSM에서의 Reject Ash와 순환모래의 활용성을 검토하였다.

  • PDF

리젝트애시를 사전혼합골재로 활용시 AE제에 의한 공기량 확보방안 (Method to Maintain Air Contents of Mortar using Premixed Aggregate with Reject ash by using AE Agent)

  • 현승용;문병룡;이제현;장덕배;한민철;한천구
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2017년도 추계 학술논문 발표대회
    • /
    • pp.103-104
    • /
    • 2017
  • This paper is to provide a method to prevent air loss of the concrete using reject ash based ternary blended aggregate due to absorption of AE agents by reject ash by adding AE agents into reject ash before mixing concrete. Test results indicate that air loss due to presence of reject ash in ternary blended aggregate can be recovered by over use of AE agents into aggregate directly before mixing.

  • PDF

투과전자현미경을 이용한 활성 잔사회 분석에 관한 연구 (A Study on Analytical Method for Energetically-Modified Reject Fly Ash Using Transmission Electron Microscope)

  • 정재현;추용식
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2016년도 춘계 학술논문 발표대회
    • /
    • pp.201-202
    • /
    • 2016
  • Energetically-modified material using reject fly ash was manufactured to investigate the effect of the material on strength characteristic of cement mortar. In order to modify reject fly ash, a vibration mill was used. after grinding process, the defects in the alignment of atom was checked using transmission electron microscope. It was found that the compressive strength values of 28 days-cured specimens using energetically-modified reject fly ash (ERFA) were higher than that of mortar with non-ground reject fly ash.

  • PDF

플라이애시 품질이 시멘트 페이스트 레올로지 특성에 미치는 영향 (Influence of Fly Ash Quality on Rheological Properties of Cement Paste)

  • 백병훈;한동엽
    • 한국건축시공학회지
    • /
    • 제17권2호
    • /
    • pp.183-189
    • /
    • 2017
  • 플라이애시는 시멘트 계열 재료의 혼화재료로서 널리 사용되고 있는 재료이다. 다만, 플라이애시는 화력발전소의 석탄재를 포집하여 정제과정을 거친 재료로서 정제과정의 에너지 소모 및 유통과정에서의 품질 확보가 중요하다. 이에 본 연구에서는 플라이애시 생산과정 중 발생하는 세 가지 종류의 다른 품질의 석탄재를 대상으로 각각의 입자조건과 시멘트 페이스트 상태에서 레올로지 거동을 평가하였다. 실험결과 리젝트 애시는 작은 석탄재 입자가 응집되어 굳어진 다공질의 큰 입자로 구성되어 있었고, 그러한 이유로 시멘트 페이스트에 포함될 경우 공기량이 높게 측정되는 경향이 나타났다. 유동성 측면에서는 석탄재가 치환되는 경우 유동성이 증진되는 양상을 보였으며 특히 점도 측면에서는 입자조건에 따라 점도를 조정할 수도 있었다.

석탄 잔사회 및 바닥재가 포함된 인공경량골재의 발포특성에 미치는 활성탄소의 영향 (Effect of activated carbon on bloating properties of artificial lightweight aggregates containing coal reject ash and bottom ash)

  • 강민아;강승구
    • 한국결정성장학회지
    • /
    • 제23권4호
    • /
    • pp.201-206
    • /
    • 2013
  • 화력발전소에서 배출되는 석탄 바닥재 및 잔사회는 재활용이 힘든 폐자원이어서 주로 매립 처분되고 있다. 본 연구에서는 국내 화력발전소에서 배출된 석탄 잔사회, 바닥재 그리고 준설토를 혼합하여 인공골재를 제조하고, 실험인자가 골재의 발포거동 및 물성에 미치는 영향을 분석하였다. 특히 미연탄소가 많이 포함되어 있는 잔사회에 대하여 하소 처리를 한 뒤, 인위적으로 활성탄소를 첨가함으로서 하소유무 및 활성탄소 첨가량이 인공골재의 발포특성에 미치는 영향을 조사하였다. 이를 위해 인공골재의 부피비중 및 흡수율 값을 시편의 미세구조 관찰 결과와 연계하여 고찰함으로서, 잔사회의 재활용율 제고에 일조하고자 하였다.

마모기로 분쇄한 Reject Ash를 활용한 고강도 모르타르의 품질특성 (Quality properties of high compressive strength mortar that uses Reject ash ground by an abraser)

  • 문병룡;백철;이재진;박병문;한민철;한천구
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2016년도 추계 학술논문 발표대회
    • /
    • pp.45-46
    • /
    • 2016
  • As coal fly ash emissions have increased due to additional constructions of domestic heat power plants, the amount of embedded reject ash (Rj henceforth) is increasing as well. Most Rj is embedded, so if it is used as an alternative admixture instead of cement, embedded quantities will decrease, leading to economic and environmentally positive effects. Therefore this study conducted an experiment to contemplate the usability of Rj ground in the Los Angeles abraser, and what effects ground Rj has on the engineering properties of high compressive strength mortar. The result was that as the number of grinding turns increased, liquidity, air quantity and intensity were improved, proving Rj a possible alternative admixture to cement.

  • PDF

마모기로 분쇄한 Reject Ash가 빈배합 모르타르의 공학적 특성에 미치는 영향 (Quality Properties of Poor-mix mortar that uses reject ash ground by an abraser)

  • 문병룡;박용준;조만기;박병문;한민철;한천구
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2016년도 추계 학술논문 발표대회
    • /
    • pp.96-97
    • /
    • 2016
  • As coal fly ash emissions have increased due to additional constructions of domestic heat power plants, the amount of embedded reject ash (Rj henceforth) is increasing as well. Most Rj is embedded, so if it is used as an alternative admixture instead of cement, embedded quantities will decrease, leading to economic and environmentally positive effects. Therefore this study conducted an experiment to contemplate the usability of Rj ground in the Los Angeles abraser, and what effects ground Rj has on the engineering properties of poor-mix mortar. The result was that as the number of grinding turns increased, liquidity, air quantity and intensity were improved, proving Rj a possible alternative admixture to cement.

  • PDF