• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.247-247
• /
• 2018

공학이나 과학에서 다루는 거의 모든 현상이나 물체는 시공간적으로 연속성을 지니고 있으며, 지형이나 지하수위분포가 대표적인 사례에 해당한다. 강수량 분포 또한 지역적인 스케일을 고려할 때 연속성을 지니고 있다고 가정될 수 있다. 이러한 연속성을 지닌 현상이나 물체를 연구 대상으로 취할 경우, 모든 위치에서의 관찰 값이나 계산 값을 얻기란 불가능하므로, 불연속적이거나 이산적인 위치에서 불연속적인 값을 얻게 된다. 이러한 시공간적으로 이산적이고 불연속적인 자료를 바탕으로 어떠한 작업을 수행하고자 할 때 자료의 연속성을 가정하게 되며, 따라서 연속성을 가정하고 내삽 처리된 근사값을 이용하게 된다. 따라서 불연속적인 자료의 내삽 처리 과정이 연구 결과의 성패를 좌우할 만큼 매우 중요할 수 있다. 하지만 대다수의 연구자나 실무자들은 내삽 처리의 중요성을 간과하고 있으며, 자료처리나 준비 과정에서 거쳐야하는 하나의 단순한 단계로만 여길 뿐이다. 따라서, 본 연구에서는 역거리 가중치법(Reciplocal Inverse Distance method), 역거리 제곱 가중치법(Inverse Square Distance method), Dual Kriging법, Hardy의 Multiquadric법, Completely Regularized spline법, 삼각망법(TIN) 등 기존에 알려진 공간자료 보간법에 대해서 소개하며, 알려져 있는 공간함수를 이용하여 다양한 경우에 대한 비교, 분석을 수행한다. 보간법의 종류에 따라 내삽 결과는 매개변수 값에 지대한 영향을 받을 수 있기 때문에, 매개변수에 따른 내삽 결과를 분석하고, 정확성과 적용성 등 다양한 내삽기법들에 대해서 평가한다.

• Journal of Information Processing Systems
• /
• v.17 no.5
• /
• pp.933-946
• /
• 2021

In the non-orthogonal multiple access (NOMA) system, multiple user signals on the single carrier are superimposed in a non-orthogonal manner, which results in the interference between non-orthogonal users and noise interference in the channel. To solve this problem, an improved algorithm combining regularized zero-forcing (RZF) precoding with minimum mean square error-serial interference cancellation (MMSE-SIC) detection is proposed. The algorithm uses RZF precoding combined with successive over-relaxation (SOR) method at the base station to preprocess the source signal, which can balance the effects of non-orthogonal inter-user interference and noise interference, and generate a precoded signal suitable for transmission in the channel. At the receiver, the MMSE-SIC detection algorithm is used to further eliminate the interference in the signal for the received superimposed signal, and reduce the calculation complexity through the QR decomposition of the matrix. The simulation results show that the proposed joint detection algorithm has good applicability to eliminate the interference of non-orthogonal users, and it has low complexity and fast convergence speed. Compared with other traditional method, the improved method has lower error rate under different signal-to-interference and noise ratio (SINR).

• Smart Structures and Systems
• /
• v.23 no.3
• /
• pp.295-306
• /
• 2019

Shanghai Tower is a 632-meter super high-rise building located in an area with wind and active earthquake. A sophisticated structural health monitoring (SHM) system consisting of more than 400 sensors has been built to carry out a long-term monitoring for its operational safety. In this paper, a reduced-order model including 31 elements was generated from a full model of this super tall building. An iterative regularized matrix method was proposed to tune the system parameters, making the dynamic characteristic of the reduced-order model be consistent with those in the full model. The updating reduced-order model can be regarded as a benchmark model for further analysis. A long-term monitoring for structural dynamic characteristics of Shanghai Tower under different construction stages was also investigated. The identified results, including natural frequency and damping ratio, were discussed. Based on the data collected from the SHM system, the dynamic characteristics of the whole structure was investigated. Compared with the result of the finite element model, a good agreement can be observed. The result provides a valuable reference for examining the evolution of future dynamic characteristics of this super tall building.

• Steel and Composite Structures
• /
• v.29 no.5
• /
• pp.635-645
• /
• 2018

Beam-column joints play a significant role in static and dynamic performances of reinforced concrete frame structures. This study contributes a numerical approach of topologically optimal design of carbon fiber reinforced plastics (CFRP) to retrofit existing beam-column connections with crack patterns. In recent, CFRP is used commonly in the rehabilitation and strengthening of concrete members due to the remarkable properties, such as lightweight, anti-corrosion and simplicity to execute construction. With the target to provide an optimal CFRP configuration to effectively retrofit the beam-column connection under semi-failure situation such as given cracks, extended finite element method (X-FEM) is used by combining with multi-material topology optimization (MTO) as a mechanical description approach for strong discontinuity state to mechanically model cracked structures. The well founded mathematical formulation of topology optimization problem for cracked structures by using multiple materials is described in detail in this study. In addition, moved and regularized Heaviside functions (MRHF), that have the role of a filter in multiple materials case, is also considered. The numerical example results illustrated in two cases of beam-column joints with stationary cracks verify the validity, benefit and supremacy of the proposed method.

• Quantitative Bio-Science
• /
• v.37 no.2
• /
• pp.133-141
• /
• 2018

Graphical lasso is one of the most popular methods to estimate a sparse precision matrix, which is an inverse of a covariance matrix. The objective function of graphical lasso imposes an ${\ell}_1$-penalty on the (vectorized) precision matrix, where a tuning parameter controls the strength of the penalization. The selection of the tuning parameter is practically and theoretically important since the performance of the estimation depends on an appropriate choice of tuning parameter. While information criteria (e.g. AIC, BIC, or extended BIC) have been widely used, they require an asymptotically unbiased estimator to select optimal tuning parameter. Thus, the biasedness of the ${\ell}_1$-regularized estimate in the graphical lasso may lead to a suboptimal tuning. In this paper, we propose a two-staged bias-correction procedure for the graphical lasso, where the first stage runs the usual graphical lasso and the second stage reruns the procedure with an additional constraint that zero estimates at the first stage remain zero. Our simulation and real data example show that the proposed bias correction improved on both edge recovery and estimation error compared to the single-staged graphical lasso.

• Steel and Composite Structures
• /
• v.42 no.6
• /
• pp.733-745
• /
• 2022

This study proposed a robust artificial intelligence (AI) model based on the social behaviour of the imperialist competitive algorithm (ICA) and artificial neural network (ANN) for modelling the deflection of reinforced concrete beams, abbreviated as ICA-ANN model. Accordingly, the ICA was used to adjust and optimize the parameters of an ANN model (i.e., weights and biases) aiming to improve the accuracy of the ANN model in modelling the deflection reinforced concrete beams. A total of 120 experimental datasets of reinforced concrete beams were employed for this aim. Therein, applied load, tensile reinforcement strength and the reinforcement percentage were used to simulate the deflection of reinforced concrete beams. Besides, five other AI models, such as ANN, SVM (support vector machine), GLMNET (lasso and elastic-net regularized generalized linear models), CART (classification and regression tree) and KNN (k-nearest neighbours), were also used for the comprehensive assessment of the proposed model (i.e., ICA-ANN). The comparison of the derived results with the experimental findings demonstrates that among the developed models the ICA-ANN model is that can approximate the reinforced concrete beams deflection in a more reliable and robust manner.

• ETRI Journal
• /
• v.45 no.2
• /
• pp.213-225
• /
• 2023

Physical layer security (PLS) can improve the security of both terrestrial and nonterrestrial wireless communication networks. This study proposes a simplified framework for nonterrestrial cyclic prefixed orthogonal variable spreading factor (OVSF)-encoded multiple-input and multiple-output nonorthogonal multiple access (NOMA) systems to ensure complete network security. Various useful methods are implemented, where both improved sine map and multiple parameter-weighted-type fractional Fourier transform encryption schemes are combined to investigate the effects of hybrid PLS. In addition, OVSF coding with power domain NOMA for multi-user interference reduction and peak-toaverage power ratio (PAPR) reduction is introduced. The performance of $\frac{1}{2}$-rated convolutional, turbo, and repeat and accumulate channel coding with regularized zero-forcing signal detection for forward error correction and improved bit error rate (BER) are also investigated. Simulation results ratify the pertinence of the proposed system in terms of PLS and BER performance improvement with reasonable PAPR.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.135-135
• /
• 2020

우리나라의 기후 자료는 일반적으로 기상청에서 발표하는 종관기상관측(ASOS)과 방재기상관측(AWS), 그리고 북한이 세계기상기구(WMO, World Meteorogical Organization)의 기상통신망(GTS)을 통해 보낸 북한기상관측(NKO)을 사용 할 수 있다. 그러나 이 중 40년 이상의 완전한 관측 자료를 얻을 수 있는 건 ASOS가 유일하지만 공간적인 표현에 한계를 갖고 있다. AWS는 관측소가 많다는 장점이 있지만 관측 기간이 길지 않고 이용 가능한 기간에도 관측이 연속적이지 못한 경우가 많다. NKO는 비록 27개의 관측소가 있지만 많은 데이터가 누락되어 일별 기후자료의 사용에 한계를 갖고 있다. 이러한 미관측 기간이나 관측 자료의 누락은 연속적인 시계열 자료분석을 기반으로 하는 수자원 모델링에 있어서 문제를 야기한다. 본 연구는 1973년부터 2019년까지 47년의 신뢰도 높은 한반도 일일 기후 자료를 구축하기 위해 다양한 방법론을 비교하였다. 추정에 사용한 방법은 총 7개로 EM algorithm for probabilistic principal components (PPCA-EM), Inverse distance weight method (IDWM), Nearest neighbor method (NNM), Multivariate normal copulas (Copula), Elastic net model (Elastic), Ordinary kriging (OK), Regularized principal components with EM algorithm (RPCA-EM)를 살펴보았다. 다양한 형태의 결측치를 가정하여 그 결과값을 비교하였고 이는 Root mean squared error(RMSE), Kling-Gupta efficiency(KGE), Nash-Sutcliffe efficiency(NSE)를 통해 평가하였다. 최종 선택된 방법론을 통하여 한반도 전역을 그리드 기반의 강수 및 최저온도/최고온도의 일별자료로 생성하였다.

• Steel and Composite Structures
• /
• v.53 no.1
• /
• pp.1-27
• /
• 2024

This work presents the effectiveness of differential quadrature shape functions (i.e., Lagrange interpolation polynomial, Cardinal sine function, Delta Lagrange kernel and Regularized Shannon kernel) in the solution of nonlinear vibration of multilayers piezoelectric plates with nonlinear elastic support. A piezoelectric composite laminated plate is rested on nonlinear Winkler and Visco-Pasternak elastic foundations problems. Based on 3D elasticity theory and piezoelectricity, the governing equations of motion are derived. Differential quadrature methods based on four shape functions are presented as numerical techniques for solving this problem. The perturbation method is implemented to solve the obtained nonlinear eigenvalue problem. A MATLAB code is written for each technique for solving this problem and extract the numerical results. To validate these methods, the computed results are we compare with the previous exact results. In addition, parametric analyses are offered to investigate the influence of length to thickness ratio, elastic foundation parameters, various boundary conditions, and piezoelectric layers thickness on the natural frequencies and mode shapes. Consequently, it is discovered that the obtained results via the proposed schemes can be applied in structural health monitoring.

• 한국정보교육학회:학술대회논문집
• /
• 2004.08a
• /
• pp.28-37
• /
• 2004

The purpose of this paper is Inflect ICT in each subject class of common school by effort about education Information that was regularized with enforcement of the seventh training courses and arrived in visual point that realize education information concretely. But, such realistic that specific discussion and research about actual ICT introduction direction or practical use way consisted enough up to now despite Is urgent example difficult. Decide target connected with Information Technology by classified grade-class and plan that teach learners systematically may have to flow fair discussion and trial run success or failure of education and point that is connected directly problem that establish date or the level and target that it is very as itself value how. Therefore, this research wished to premise computer-aided education target in primary school by analyze education target of each subject that come out in primary grade subject and abroad training courses.