• Proceedings of the KOSOMBE Conference
• /
• v.1995 no.05
• /
• pp.241-246
• /
• 1995

An experimental investigation was performed under steady flow condition to assess hydrodynamic performance of floating-type monoleaflet polymer valves (MLPV) with different leaflet thickness. The St. Jude Medical valve (SJMV) was also used for comparison tests. Pressure drops of MLPVs are larger than those for other types of polymer valves and mechanical valves. Furthermore, the thicker is the leaflet thickness of a polymer valve, the larger arc the corresponding press drop. The velocity profiles for MLPV reveal a large reversed flow region downward to the valve position. The maximum wall shear stresses of MLPVs at a flow rate of 30 l/min are in the range $54-130\;dyn/cm^2$, and the corresponding maximum. Reynolds shear stresses are in the range of $100-500\;dyn/cm^2$, respectively. Both arc beyond the allowable limit clinically. In contrast, floating-type monoleaflet polymer valves show better hydrodynamic performance in leakage volume. From the designing point of view, it can be concluded that the optimum thickness of leaflet for better hydrodynamic performance is one of the important parameters.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.3
• /
• pp.943-946
• /
• 2011

The electronic absorption and surface morphology evolution of two types of molecular double layer thin films, copper phthalocyanine (CuPc) layer deposited on chloro[subphthalocyaninato]boron(III) (SubPc) layer, denoted as SubPc/CuPc, and vice versa, with various thicknesses were investigated using ultraviolet (UV)-visible spectroscopy and atomic force microscopy (AFM). Both types of double layer structures showed similar broadened absorption patterns in the UV-visible region that were consistent with the fitted spectra following simple linear combination of the single layer absorption spectra of the two materials. In contrast, the surface morphology of double layer structures was dependent on the order of deposition. For the CuPc/SubPc structures, surface morphology was characterized by elongated grains, which are characteristic of SubPc thin films, indicating that the morphological influence of the underlying CuPc layer on the subsequent SubPc layer was not large. For the SubPc/CuPc structures, however, the underlying SubPc layer acted as a morphological template for the subsequently deposited CuPc layer. It was also observed that the grain size of the CuPc layer varied according to the thickness of the underlying SubPc layer.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.446-449
• /
• 2000

A direct RTI(Rotation and translation invariant) fingerprint identification is proposed using the GCMs(generalized complex moments) and Gabor filter-based features from the grey level fingerprint around core point. The core point is located as reference point for the translation invariant matching. And its symmetry axis is detected for the rotation invariant matching from its neighboring region centered at the core point. And then, fingerprint is divided into non-overlapping blocks with respect to the core point and, in contrast to minutiae-based method using various processing steps, features are directly extracted from the blocked grey level fingerprint using Gabor filter, which provides information contained in a particular orientation in the image. The Proposed fingerprint identification is based on the Euclidean distance of the corresponding Gabor features between the input and the template fingerprint. Experiments are conducted on 300 ${\times}$ 300 fingerprints obtained from the CMOS sensor with 500 dpi resolution, and the proposed method could obtain 97% identification rate.

• Journal of the Semiconductor & Display Technology
• /
• v.7 no.1
• /
• pp.11-16
• /
• 2008

Confocal scanning microscopy is a widely used technique for three dimensional measurements because it is characterized by high resolution, high SNR and depth discrimination. Generally an image is generated by moving one optical probe that satisfies the confocal condition on the specimen. Measurement speed is limited by movement speed of the optical probe; scanning speed. To improve measurement speed we increase the number of optical probes. Specimen region to scan is divided by optical probes. Multi-point information each optical probe points to can be obtained simultaneously. Therefore image acquisition speed is increased in proportion to the number of optical probes. And multiple optical probes from red, green and blue laser sources can be used for color imaging and image quality, i.e., contrast, is improved by adding color information by this way. To conclude, this technique contributes to the improvement of measurement speed and image quality.

• ETRI Journal
• /
• v.33 no.2
• /
• pp.275-278
• /
• 2011

This letter presents a polymer $1{\times}2$ thermo-optic totalinternal-reflection digital optical switch (TIR-DOS) with an index contrast of 1.5%-${\delta}$ operating at low power consumption. The structure of our $1{\times}2$ TIR-DOS was created by adding a reflection port to that of a conventional multimode filtering variable optical attenuator. To improve the total-internalr-eflection efficiency, a heater offset was applied to the crossing region of multimode waveguides of the TIR-DOS. The fabricated $1{\times}2$ TIR-DOS shows a low electrical power consumption of 18 mW for an on-off ratio of 35 dB.

• Publications of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.481-483
• /
• 2015

Multi-dimensionality in the inner working of core-collapse supernovae has long been considered one of the most important ingredients to understand the explosion mechanism. We perform a series of numerical experiments to explore how rotation impacts the 3-dimensional hydrodynamics of core-collapse supernova. We employ a light-bulb scheme to trigger explosions and a three-species neutrino leakage scheme to treat deleptonization effects and neutrino losses from the neutron star interior. We find that the rotation can help the onset of neutrino-driven explosions for models in which the initial angular momentum is matched to that obtained from recent stellar evolutionary calculations (${\sim}0.3-3rad\;s^{-1}$ at the center). For models with larger initial angular momenta, a shock surface deforms to be oblate due to larger centrifugal force. This makes a gain region, in which matter gains energy from neutrinos, more concentrated around the equatorial plane. As a result, the preferred direction of the explosion in 3-dimensional rotating models is perpendicular to the spin axis, which is in sharp contrast to the polar explosions around the axis that are often obtained from 2-dimensional simulations.

• Journal of Contemporary Eastern Asia
• /
• v.16 no.2
• /
• pp.44-58
• /
• 2017

Scholars have long debated the factors that drive political participation and have recently applied theories, developed from analyses of citizens from Europe and the United States, to respondents in the democratizing countries of Asia. In both Hong Kong and Singapore, however, citizens attend rallies and contact officials - yet do so under authoritarian governance. Are the causes of political participation in these cities similar to what is observed in other groups of respondents across Asia? Or, do institutions influence whether individuals participate? In this paper, I evaluate the development of liberal norms of engagement in both cities as a function of traditional models of participation. As citizens in these cities possess some of the highest standards of living in the region, they should also face frustrations with the limited democratic accountability of their leaders. Ultimately, individuals in each city have developed support for democracy but, given the differing goals of each regime, the nature of democratic engagement differs considerably. In Singapore, citizens are mobilized to engage and participate but support the status quo. By contrast, engaged Hong Kong residents participate out of a frustration with the government, a function of their high levels of internal efficacy and institutional detachment.

• Korean Journal of Materials Research
• /
• v.24 no.7
• /
• pp.344-350
• /
• 2014

Metal films (i.e., Ti, Al and SUH310S) were prepared in a magnetron sputtering apparatus, and their cross-sectional structures were investigated using scanning electron microscopy. The apparatus used consisted of a cylindrical metal target which was electrically grounded, and two anode rings attached to the top and to the bottom of the target. A wire was placed along the center-line of the cylindrical target to provide a substrate. When the electrical potential of the substrate was varied, the metal-film formation rate depended on both the discharge voltage and the electrical potential of the substrate. As we made the magnetic field stronger, the plasma which appeared near the target collected on the plasma wall surface and thereby decreased the bias current. The bias current on the conducting wire was different from that for cation collection. The bias current decreased because the collection of cations decreased when we increased the magnetic-coil current. When the substrate was electrically isolated, the films deposited showed a slightly coarse columnar structure with thin voids between adjacent columns. In contrast, in the case of the grounded substrate, the deposited film did not show any clear columns but instead, showed a densely-packed granular structure. No peeling region was observed between the film and substrate, indicating good adhesion.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.3
• /
• pp.253-259
• /
• 2014

This study proposes a map-based control method to improve a vehicle's lateral stability, and the performance of the proposed method is compared with that of the conventional model-referenced control method. Model-referenced control uses the sliding mode method to determine the compensated yaw moment; in contrast, the proposed map-based control uses the compensated yaw moment map acquired by vehicle stability analysis. The vehicle stability region is calculated by a topological method based on the trajectory reversal method. The performances of model-referenced control and map-based control are compared under various road conditions and driving inputs. Model-referenced control uses a control input to satisfy the linear reference model, and it generates unnecessary tire lateral forces that may lead to worse performance than an uncontrolled vehicle with step steering input on a road with low friction coefficient. The simulation results show that map-based control provides better stability than model-referenced control.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2008.05a
• /
• pp.285-289
• /
• 2008

There has been a project in Japan recently to develop the mixed-use facility in order to help regenerate its city's vitality. They must make efficient use of resources that contains historical and local identity. In contrast, Korea hasn't considered developing their mixed-use facilities for maintaining their historical identity. This research will analyze how locality is reflected in the 8 mixed-use facilities in Japan. The research method was as follows: Preparatory study and literature research were conducted to extract the elements of locality shown in the mixed-use facilities in Japan. According to the results, the peculiarities of locality are as follows: 1) It's important to make the most of the local Identity by reflecting on the historical peculiarity of the region. 2) Nature and its environmental surroundings should be considered when constructing buildings in order to revitalize its local identity. 3) In the perception aspect, when a mixed-use facility is open for visit, the negative elements such as the 'peripheral regional gap' that may be felt by the visitor must be kept to the minimum.