• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.1
• /
• pp.54-62
• /
• 2013

In this study, a wireless and non-power SAW (surface acoustic wave) temperature sensor was developed. The single inter-digital transducer (IDT) of SAW temperature sensor of which resonance frequency is 434 MHz was fabricated on $128^{\circ}$ rot-X $LiNbO_3$ piezoelectric substrate by semiconductor processing technology. To find optimal acoustic reflector for SAW temperature sensor, various kinds of acoustic reflectors were fabricated and their reflection characteristics were analyzed. The IDT type acoustic reflector showed better reflection characteristic than other reflectors. The wireless temperature sensing system consisting of SAW temperature sensor with dipole antenna and a microprocessor based control circuit with dipole antenna for transmitting signal to activate the SAW temperature sensor and receiving the signal from SAW temperature sensor was developed. The result with wireless SAW temperature sensing system showed that the frequency of SAW temperature sensor was linearly decreased with the increase of temperature in the range of 40 to $80^{\circ}C$ and the developed wireless SAW temperature sensing system showed the excellent performance with the coefficient of determination of 0.99.

• Korean Journal of Optics and Photonics
• /
• v.17 no.1
• /
• pp.54-59
• /
• 2006

Biophotonic sensors based on polymer waveguide with Bragg reflection grating are demonstrated in this work. Waveguide Bragg reflectors were designed by using the effective index method and the transmission matrix method. The grating pattern was formed by exposing the laser interference pattern on a photoresist. On top of the inverted rib waveguide, the Bragg reflection grating was inscribed by the O2 plasma etching. In order to perform the bio-molecule detection experiment, a calixarene molecule was self-assembled on top of thin Au film deposited on the waveguide Bragg reflector. To measure the response of the sensor, several PBS solutions with different concentrations of potassium ion from 1 pM to $100\;{\mu}M$ were dropped on the sensor surface. The shift of Bragg reflection wavelength was observed from the fabricated sensor device, which was proportional to the concentration of potassium ion ranging from 1 pM to 108 pM.

• Journal of Convergence for Information Technology
• /
• v.7 no.2
• /
• pp.1-9
• /
• 2017

Recently, the DDoS attack using the amplifier method makes it difficult to distinguish the normal traffic from the normal server and it is difficult to detect even the attack detection. Since the SSDP protocol is a common protocol widely used in IoT devices, it is used as a DDoS amplification attack. In this paper, we analyze the reflector attack of SSDP which is one of the DDoS and suggest a technical proposal to detect and defend against the attack by managing the Mac address of each device. Also, we propose a control structure to protect the reflection attack of SSDP in Home IoT. The efficiency of the proposed system has been verified by performing an experimental attack on the virtual environment.

• Spatial Information Research
• /
• v.21 no.1
• /
• pp.45-52
• /
• 2013

Recently 3D surveying is recommended to manage underground facilities systematically before refilling of site operation. As the demand of realtime localization increases, cost reduction and consistent data construction which are realizable by using one man surveying method with unmanned target, are necessary for constructing DB of all sorts of the underground facilities with more speediness and correctness. This study sets a goal to develop a new type of surveying target which allows realtime localization to be performed by one man, through making an optimum reflector(triangle, quadrangle, and semispherical shape) by using the retro-reflection principle of optical prism which is being used for surveying currently. The new surveying target makes realtime surveying possible. To check reliability of its data, the accuracy is compared with surveying coordination of total station for each type in a quantitative method. In the result, the usefulness of the reflector for Underground Facilities localization is proved. Thus the foundation for underground DB construction conducted by one man is established for acquisition of 3D location information in more efficient way through using unmanned target.

• Geophysics and Geophysical Exploration
• /
• v.11 no.2
• /
• pp.148-152
• /
• 2008

Multichannel seismic profiles reveal a strong bottom simulating reflector (BSR) occurring below the seafloor in the plain of the Ulleung Basin, East Sea (Japan Sea). The essential characteristics of the BSR include its cross-cutting relationship to strata, strong amplitude, and reverse polarity with respect to the seafloor reflection, representing the base of the gas hydrate stability zone (BHSZ). The BSR reflection coefficient ranging from -0.23 to -0.26 is 1.5${\sim}$1.7 times that of the seafloor reflection and interval velocities decrease to less than 700 m/s below the BSR. These features indicate the existence of free gas beneath the GHSZ. Heat flow, estimated from the BSR depth as $95{\sim}98mW/m^2$, is in good agreement with measured values. Therefore, the BSR can be efficiently used to estimate regional distribution of heat flow in the Ulleung Basin.

• Proceedings of the KIEE Conference
• /
• 1994.07b
• /
• pp.1216-1219
• /
• 1994

A reflection type SEED from LP-MOCVD grown InGaAs/GaAs ESQW structures, with 5% In fraction, has been fabricated and its basic characteristics were investigated. Its intrinsic region consists of 50 pairs of alternating $100{\AA}$ $In_{0.05}Ga_{0.95}As$ barrier and $100{\AA}$ GaAs layers. And a multilayer reflector stack of $Al_{0.12}Ga_{0.88}As(641{\AA})-/AlAs(774{\AA})$ was vertically integrated below the p-i-n structures. The device processing includes the mesa etching, insulator deposition, indium metallization, and thermal alloy for Ohmic contact. Photocurrent spectrum measurement showed the exciton absorption peak at 905nm and availability as a optical switching device. This device showed a contrast ratio of 2:1 by the reflectance spectrum measurement.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.3
• /
• pp.181-189
• /
• 2019

In this study, a triple-band antenna that can be used in WLAN(Wireless Local Area Network) at 2.4 GHz, 5.8 GHz, and 5G at 3.5 GHz is fabricated. The proposed antenna uses a parasitic element to show the triple band, and the reflector is used at a distance of ${\lambda}/4$ from the antenna to reduce the Specific Absorption Rate(SAR). Its dimensions are $100{\times}75{\times}1.6mm^3$ and each parameter value is optimized for better performance and a lower SAR value. As a result, we obtained a bandwidth of 540 MHz(2.02~2.56 GHz), 390 MHz(3.39~3.78 GHz), and 1,210 MHz(5.56~6.77 GHz) based on the reflection loss factor of -10 dB. In addition, the SAR values of the antenna with reflector are observed to reduce below the SAR value of international standard.

• Economic and Environmental Geology
• /
• v.23 no.3
• /
• pp.353-358
• /
• 1990

This paper presents numerical experiments on migration of synthetic seismograms using by $45^{\circ}$ wave equation. The seismograms used are zero-offset seismogram (corresponding to stacked section) on point reflectors, dipping plane reflector, faulted and folded layers. The seismograms are constructed by upward continuation of seismic source wavelets, exploading on subsurface reflection interfaces, to the earth surface. The synthetic seismograms are migrated by downward continuation and imaging. The upward and downward continuations are implemented by solving the $45^{\circ}$ wave equation with the finite-difference method. Migration of the synthetic data used in this study results in relatively accurate reposition of subsurface structures while the synthetic sections are quite different from the structures.

• Journal of Sensor Science and Technology
• /
• v.21 no.6
• /
• pp.408-412
• /
• 2012

An in-line dispersive delay line (DDL) demands low and controllable reflectivity of the reflectors, especially if the surface acoustic wave (SAW) propagates all the way along the reflecting structure. The metal reflectors are usually too strong and introduce too much attenuation in such a device. The proposed solution of this problem is to spatially separate the acoustic channels for different frequencies with the help of Fan-shaped Transducers (FIDT) and to use narrow open metal reflectors to reduce reflectivity. Special arrangement of FIDT is performed to use 180-deg. reflection of the SAW. Narrow open metal strips with a metallisation ratio of the order of 20% are used as reflectors with small and controllable reflectivity. Reflectivity of such strips is estimated both theoretically and experimentally. Experimental performance of the proposed DDL is presented.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.71-74
• /
• 1995

Diamond shaping is one of the machining strategies to make the optical micro-groove molds,and it is especially useful when rhe component is an assembly of the linear micro-groove array. A mirror-like surface and arbitrary crose-sectional curve can be easily made by diamond. Howerver, the cutting speed of shaping is relatively lower than that of the other cutting methods, and there exist an unstable cutting conditions that generate the chatter. This study is focused on the modeling of the simplified self-induced chatter of the diamond shapping. Form the chatter model and experiments, it is found that the unstable cutting conditions exist wwhen the depth of cut is low and cutting speed is high.