• 한국컴퓨터정보학회논문지
• /
• 제27권11호
• /
• pp.81-87
• /
• 2022

본 논문에서는 가상환경에서 사운드 몰입을 개선시키기 위한 회절 기반의 사운드 제어 기법을 제안한다. 제안하는 기법은 물리적 환경에서 사운드의 파동과 흐름 그리고 회절과 유사한 패턴을 실시간으로 표현할 수 있다. 우리의 접근 방식은 사운드 근원지로부터 장애물이 있는지 판단을 한 뒤, 장애물로 인해 굴절과 회절된 새로운 사운드의 위치를 계산한다. 레이트레이싱 기반으로 장애물과의 충돌 여부를 판단하고, 충돌에 의해 반사와 굴절된 벡터를 이용하여 장애물 너머에 있는 에이전트에게 들리는 사운드의 크기를 예측한다. 이 과정에서 반사와 굴절된 레이의 개수에 따라 사운드의 크기를 감쇠시켜 거리와 재질에 따른 사운드 감쇠를 모델링한다. 결과적으로 물리 기반 접근법에서 표현되는 회절 패턴을 실시간으로 표현했으며, 장애물의 위치가 변경됨에 따라 회절 패턴도 변경됨을 보여주고, 이에 따라 사운드의 크기가 자연스럽게 확산되는 결과를 보여준다. 제안하는 방법은 현실에서 표현되는 소리의 확산과 회절 특징을 거의 유사하게 복원해냈다.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제7권3호
• /
• pp.163-170
• /
• 2002

This report describes the use of a transtubular bioreactor to study the relative effects of diffusion versus perfusion of medium on antibody production by a hybridoma cell line. The study was performed with a high-density cell culture maintained in a serum-free, low-protein medium for 77 days. It was determined that the reactor possessed a macro-mixing pattern residence time distribution similar to a continuous stirred tank reactor (CSTR), However, due to the arrangement of the medium lines in the reactor, the flow patterns for nutrient distribution consist of largely independent medium path lengths ranging from short to long. When operated with cyclic, reversing, transtubular medium flow, some regions of the reactor (with short residence times) are more accessible to medium than others (with long residence times). From this standpoint, the reactor can be divided into three regions: a captive volume, which consists of medium primarily delivered via diffusion; a lapped volume, which provides nutrients through unilateral convection; and a swept volume, which operates through bilateral convection. The relative sizes of these three volumes were modified experimentally by changing the period over which the direction of medium flow was reversed from 15 min (larger captive volume) to 9 h (larger swept volume). The results suggest that antibody concentration increases as the size of the diffusion-limited (captive) volume is increased to a maximum at around 30 min with a sharp decrease thereafter. As reflected by changes in measured consumption of glucose and production of lactate, no significant difference in cellular metabolism occurred as the reactor was moved between these different states. These results indicate that the mode of operation of the transtubular bioreactor may influence antibody productivity under serum-free, low-protein conditions with minimal effects on cellular metabolism.

• 한국결정성장학회지
• /
• 제19권1호
• /
• pp.39-47
• /
• 2009

The effects of thermo-solutal convection on mercurous chloride system of ${Hg_2}{Cl_2}$, and Ne during physical vapor transport are numerically investigated for further understanding and insight into essence of transport phenomena, For $10\;K{\le}{\Delta}T{\le}30\;K$, the growth rate slowly increases and, then is decreased gradually until ${\Delta}T$=50 K, The occurrence of this critical point near at ${\Delta}T$=30 K is likely to be due to the effects of thermo-physical properties stronger than the temperature gradient corresponding to driving force for thermal convection. For the range of $10\;Torr{\le}P_B{\le}300\;Torr$, the rate is second order-exponentially decayed with partial pressures of component B, $P_B$. For the range of $5{\le}M_B{\le}200$, the rate is second order-exponentially decayed with a function of molecular weight of component B, $M_B$. Like the case of a partial pressure of component B, the effects of a molecular weight arc: reflected through the binary diffusivity coefficients, which are intimately related with suppressing the convection flow inside the growth enclosure, i,e., transition from convection to diffusion-dominant flow mode as the molecular weight of B increases. The convective mode is near at a ground level, i,e., on earth (1 $g_0$), and the convection is switched to the diffusion mode for $0.1\;g_0{\le}g{\le}10^{-2}g_0$, whereas the diffusion region ranges from $10^{-2}g_0$ up to $10^{-5}g_0$.

• Journal of Welding and Joining
• /
• 제4권2호
• /
• pp.47-52
• /
• 1986

Friction Welds are formed by the mechanisms of diffusion as well as mechanical inter-locking. The severe plastic flow at the interface by the forge action of the process brings the subsurface so close together that detection of any unbounded area becomes very difficult. No reliable method is available so fat to determine the weld quality nondestructively. The paper presents an attempt to determine weld strength quantitatively using the ultrasonic pulseecho method. The new approach calculates the coefficient of reflection based on measured amplitudes of the echoes. This coefficient provides a single quantitative measurement which involves both acoustic energy reflected at the welded interface as well as transmitted across the interface. As a result, it was known that the quantitative relationship between the coefficient and the weld strength (torsional strength) could be drawn.

• 기술경영경제학회:학술대회논문집
• /
• 기술경영경제학회 2006년도 제28회 동계학술발표회 논문집
• /
• pp.226-247
• /
• 2006

Korea has accomplished remarkable economic growth based on the accumulating technological capability. Science and Technology policy aiming at quantitative growth has concentrated on S&T hardware infra-structure construction but it overemphasizes technological factors. This policy has not sufficiently reflected social and cultural elements that should be incorporated in S&T development process. Therefore many experts have been emphasizing the importance of science culture as an important ingredient of S&T policy. This paper aims at investigating how science culture could be diffused. Nowadays, many countries have a strong interest in science shop as an important instrument of science culture. Science shop, however, has been activated in European area so it is not familar to Korea. However there are already a few science shops in Korea. In this paper, we will investigate the Korea science shops. In particular, we will analyze the current status, organizational structure and problems of Korea science shops. we will draw some important policy implications to activate science shops and to strengthen S&T policies in Korea.

• 한국환경보건학회지
• /
• 제19권4호
• /
• pp.25-32
• /
• 1993

Granular activated carbon is commonly used in fixed-bed adsorbers to remove organic chemicals. In this experiment organic chemical solutions were prepared by adding the reagent grade organic chemical to distilled water. Isotherm adsorption tests of volatile organic chemicals were conducted using bottle-point technique and column test. Organic chemicals after passing through the column were extracted with hexane and analyzed with gas chromatography (Hewlett-Packard 5890) to check the adsorption capacity and breakthrough curve. The result were as follows: 1. The BET surface area of coconut activated carbon was 658~1,010 m$^2$/g where as coconut shell carbon was 6.6 m$^2$/g. Coconut activated carbon increased the BET surface area and adsorption capacity in bottle-point isotherm. 2. The adsorption capacity of coconut activated carbon for trichloroethylene (TCE) was reduced in the presence of humic substance. 3. A decrease in particle size of activated carbon resulted in higher adsorption capacity and lower intraparticle diffusion coefficient. It is reflected not only as a decrease in Freudlich adsorption capacity value (K) but also as an increase in Freudlich exponenent value (1/n).

• Korean Chemical Engineering Research
• /
• 제52권1호
• /
• pp.133-140
• /
• 2014

본 연구의 목적은 국내 화력발전소에서 사용중인 인도네시아 석탄촤의 연소반응율을 연구하는 것이다. 석탄촤의 반응율은 External, Internal effectiveness factor를 고려하여 입자 내부 및 외부확산을 정량적으로 정리하였으며, Random pore model을 사용하여 탄소변환율에 따른 입자내부비표면적의 변화를 반영하였다. 가열 및 측정이 가능한 WHR(Wire Heating Reactor)를 활용하여 반응시간을 측정함으로써 석탄촤의 반응율을 도출하였고 BET(Brunauer-Emmett-Teller) 및 TGA(Thermo-Gravimetric Analysis) 장비를 활용하여 석탄촤의 물리적인 특성인 내부비표면적과 Random pore model의 구조변수(${\Psi}$)를 측정하였다. 석탄 종에 따른 활성화에너지 및 빈도인자를 도출하기 위해 아역청탄인 BARAMULTI, ENERGYMAN, AGM탄을 사용하였다. 본 연구 결과에서 External, Internal effectiveness factors를 통해 확산에 따른 kinetics를 비교한 결과 외부 확산 보다 내부 확산의 영향이 지배적임을 확인하였다. 최종적으로 내부 및 외부 확산에 대한 영향을 고려한 3종의 석탄촤 Intrinsic kinetics의 활성화에너지는 110~118 kJ/mol의 값을 보였다.

• Nuclear Engineering and Technology
• /
• 제35권5호
• /
• pp.369-377
• /
• 2003

Since Zr-2.5Nb pressure tubes have a high risk for the formation of blisters during their operation in pressurized heavy water reactors, there has been a strong incentive to develop a method for the non-destructive detection of blisters grown on the tube surfaces. However, because there is little mismatch in acoustic impedance between the hydride blisters and zirconium matrix, it is not easy to distinguish the boundary between the blister and zirconium matrix with conventional ultrasonic methods. This study has focused on the development of a special ultrasonic method, so called ultrasonic velocity ratio method for a reliable detection of blisters formed on Zr-2.5Nb pressure tubes. Hydride blisters were grown on the outer surface of the Zr-2.5Nb pressure tube using a cold finger attached to a steady state thermal diffusion equipment. To maximize a difference in the ultrasonic velocity in hydride blisters and the zirconium matrix, the ultrasonic velocity ratio of longitudinal wave to shear wave, $V_L/V_S$, has been determined based on the flight time of the longitudinal echo and reflected shear echo from the outer surface of the tubes. The feasibility of the ultrasonic velocity ratio method is confirmed by comparing the contour plots reproduced by this method with those of the blisters grown on the Zr-2.5Nb pressure tubes.

• 한국전기전자재료학회논문지
• /
• 제31권3호
• /
• pp.146-151
• /
• 2018

In this study, we compared the threshold-voltage extraction methods of accumulation-type JLDG (junctionless double-gate) MOSFETs (metal-oxide semiconductor field-effect transistors). Threshold voltage is the most basic element of transistor design; therefore, accurate threshold-voltage extraction is the most important factor in integrated-circuit design. For this purpose, analytical potential distributions were obtained and diffusion-drift current equations for these potential distributions were used. There are the ${\phi}_{min}$ method, based on the physical concept; the linear extrapolation method; and the second and third derivative method from the $I_d-V_g$ relation. We observed that the threshold-voltages extracted using the maximum value of TD (third derivatives) and the ${\phi}_{min}$ method were the most reasonable in JLDG MOSFETs. In the case of 20 nm channel length or more, similar results were obtained for other methods, except for the linear extrapolation method. However, when the channel length is below 20 nm, only the ${\phi}_{min}$ method and the TD method reflected the short-channel effect.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 E
• /
• pp.1770-1772
• /
• 1998

This study is concluded under by investigation about the lighting environment on a blackboard in elementary, middle, high school of inchon metropolitan. 1. The illumination was approximated to standard value in the side of quantity by the result of the Mimistry of Education's command. However, the uniformity of illuminescence was relatively increased. 2. In order to raise the blackboard lighting, we installed local lighting fixture for blackboard but most of schools are directly adopted to the way of sticking to the blackboard and the lower part of the blackboard is not effective. So that it is desirable of teacher and students to put the local lighting in front of the higher part of the blackboard or install in setting the perfect diffusion light from the ceiling. 3. Deviation of luminance is also more groat when local lighting exist for blackboard. And, regardless of local lighting, luminance of blackboard in side of window, from direction of floor is high because of regular reflected light. Therefore a curtain or blind must be installed pertinently.