• Korean Chemical Engineering Research
• /
• v.48 no.2
• /
• pp.185-192
• /
• 2010

The chemical-looping combustion(CLC) has advantages of no energy loss for separation of $CO_2$ without $NO_x$ formation. This CLC system consists of oxidation and reduction reactors where metal oxides particles are circulating through these two reactors. In the present study, the reaction kinetic equations of iron oxide oxygen carriers supported on bentonite have been determined by the shrinking core model. Based on the reactivity data, design values of solid circulation rate and solids inventory were determined for the rector. Two types of interconnected fluidized bed systems were designed for CLC application, one system consists of a riser and a bubbling fluidized bed, and the other one has a riser and two bubbling fluidized beds. Solid circulation rates were varied to about $30kg/m^2s$ by aeration into a loop-seal. Solid circulation rate increases with increasing aeration velocity and it increases further with an auxiliary gas flow into the loop-seal. As solid circulation rate is increased, solid hold up in the riser increases. A typical gas leakage from the riser to the fluidized bed is found to be less than 1%.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.6
• /
• pp.291-298
• /
• 2016

Electrochemical water treatment process as a useful treatment method for the removal of non-degradable matter has been consistently studied for several decades. Key process of electrochemical water treatment are oxidation reaction from an anode and reduction from a cathode. In this study, the effect of pre-treatment methods in the insoluble electrode manufacturing process for the water treatment has been evaluated for the life time of electrode The results of this study showed that pre-treatment methods of a base metal such as surface roughness, clean method and interlayer formation influenced to life time of electrode when the same condition (catalyst electrode layer coating method and material system) was applied for pre-treatment methods. This study was conducted by using $IrO_2/Ti$ electrode In the test of sand-blasting process, an electrode manufactured by using sanding media of different sizes resulted in the most effective electrode life time when the size of alumina was used for $212{\sim}180{\mu}m$ praticle size (#80). The most effective method was considered using arc plasma in the additional roughness control and cleaning process, sputtering method to form Ta type interlayer formation process.

• Journal of Dairy Science and Biotechnology
• /
• v.21 no.2
• /
• pp.97-104
• /
• 2003

It is extremely important to destroy the antigenicity of milk proteins for dietetic treatment of infants with milk allergy. Enzymatic digestion of milk protein is not only effective for destroying antigenicity, but it also is less liable to alter the nutritive value. Bovine casein was hydrolyzed with eight different commercial proteases derived from bacterias or fungi, either individually or in combination to eliminate protein allergenicity. The average molecular weight of casein hyrdolysates determined by size exclusion chromatography is about 550${\sim}$2,300 dalton range. Antigenicity of the casein hyrdolysates was not detected by heterologous passive cutaneous anaphylaxis in guinea pig-rabbit antiserum system. The inhibition test on the enzyme-linked immunosorbent assay(ELISA) showed that the antigenicity of casein hydrolysates is lowed up to 1/8,000 than that of intact bovine casein. As the enzyme reaction was carried out by the combination of bacterial and fungal protease, casein hydrolysates showed much lower bitterness and antigenicity. It suggests that these hydrolysates will be applied to many kinds of foods including the development of hypo-allergenic infant formula.

• Applied Biological Chemistry
• /
• v.38 no.6
• /
• pp.590-595
• /
• 1995

To examine the characteristics of antioxidative compounds from Capsella bursa-pastoris, ethanol extracts were separated into five organic solvent fractions; hexane(Fr.H), diethyl ether (Fr.E), ethyl acetate(Fr.EA), butanol (Fr.B), and water(Fr.D) fractions. Fr.B showed the greatest electron donating ability and inhibitory effect on lipid peroxidation. Whereas Fr.E had the most excellent activity in the superoxide radical scavenging activity by xanthine/xanthine oxidase-cytochrome c reduction system. The inhibitory effect of each fraction on xanthine oxidase was also measured. Fr.E had the strongest inhibitory effect on xanthine oxidase and $IC_{50}$ was $5.65\;{\mu}g$. The results indicate that the superoxide radical scavenging activity of Fr.E is caused by the inhibitory effect on radical generating system of xanthine oxidase. Also the order of inhibitory effect on xanthine oxidase was Fr.B

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.2 no.4
• /
• pp.167-174
• /
• 2000

A glass chamber experiment was conducted to evaluate the impact of ozone (O$_3$) on the physiology of two soybean, Glycine max L. cultivars, 'Hwanggum' and 'Jangyub'. Thirty-day old plants with 1-2 nodes were exposed to $O_3$ of <10 and 150 n1 1$^{-1}$ in the chambers for 8 h d$^{-1}$ for 3 days. Net photosynthesis, stomatal conductance, chlorophyll a, chlorophyll b and total chlorophyll contents, and foliar injury (% injured leaves) were measured. Although foliar damage was more severe on Jangyub than on Hwanggum, net photosynthesis was decreased by 60% on Hwanggum and 13% on Jangyub due to the $O_3$ treatment. Stomatal conductance on Jangyub was twice higher than that on Hwanggum and it was not changed by the $O_3$ treatment. Whereas, stomatal conductance on Hwanggum was 60-80% decreased by $O_3$, Chlorophyll contents did not change due to the $O_3$ treatment or variety. We can conclude that the reduction of net photosynthesis by $O_3$ was mainly due to the decreases of stomatal conductance and Rubisco (ribulose-1,5-bisphosphate carboxylase/oxygenase) activity on dark reaction. And foliar injury and chlorophyll content did not contribute to the net photosynthetic decrease. The gas-exchange variables measured 24 h after the termination of $O_3$ fumigation showed that there was no significant recovery within a day. Since the physiological responses on Jangyub were not much affected by the $O_3$ treatment, this variety could be $O_3$ resistant.

• Journal of the Mineralogical Society of Korea
• /
• v.30 no.4
• /
• pp.179-186
• /
• 2017

This study investigated the mineralogical characteristics of lime mortars used in pointing of Namhansanseon Yeojang from Joseon dynasty. Polarization microscopy revealed quartz, feldspar, mica, pyroxene and opaque minerals in the lime mortars. XRD analysis also confirmed clay minerals chlorite and kaolin. As a result of particle size analysis of lime mortars, the particle size distribution was wide and size was not uniform. 60% of samples were corresponded to the sand area. The chemical components detected from XRF analysis, 8.71-11.18 % of Ca as the main component of lime and $SiO_2$, $Al_2O_3$, and $Fe_2O_3$ in soil minerals were main components. The lime mortars showed an endothermic peak due to decarbonization reaction of $CaCO_3$ at $750^{\circ}C$ and weight reduction rate of 10%. The microstructures were agglomerated amorphous and observed rhombohedral calcite crystals by scanning electron microscope. It is considered that the pointing of Yeojang is a mortar mixed with lime and soil. In addition the Hanbongseong Yeojang was constructed using the same materials and construction technique because the minerals composition is not different according to the Yeojang location and use.

• Korean Journal of Materials Research
• /
• v.6 no.8
• /
• pp.817-824
• /
• 1996

Removal of Cu impurities on Si substrates using remote H-plasma was investigated. Si substrates were intentionally contaminated by 1ppm ${CuCI}_{2}$, standard chemical solution. To determine the optimal process condition, remote H-plasma cleaning was conducted varying the parameters of rf power, cleaning time and remoteness(the distance between the center of plasma and the surface of Si substrate). After remote H-plasma cleaning was conducted, Si surfaces were analysed by TXRF(total x-ray reflection fluorescence) and AFM(atomic force microscope). The concentration of Cu impurity was reduced by more than a factor of 10 and its RMS roughness was improved by more than 30% after remote H-plasma cleaning. TXRF analysis results show that remote H-plasma cleaning is effective in eliminating Cu impurity on Si surface when it is performed under the optimal process condition. AFM analysis results also verifies that remote H-plasma cleaning makes no damage to the Si surface. The deposition mechanism of Cu impurity may be explained by the redox potential(oxidation-reduction reaction potential) theory. Based on the XPS analysis results we could draw a conclusion that Cu impurities on the Si substrate are removed together with the oxide by a "lift-off" mechanism when the chemical oxide( which forms when Cu ions are adsorbed on the Si surface) is etched off by reactive hydrogen atoms.gen atoms.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.6 no.2
• /
• pp.292-300
• /
• 1996

Hexavalent chromium($Cr^{+6}$) compounds are considered to be particularly hazardous, primarily because of the associated risk of allergic reaction and cancer. The analytic method of hexavalent chromium such as the s-diphenylcarba-zide(DPC) method and all ether previously used methods are often made uncertain due to significant interferences from organic components. This report can provide a technique for the more rapid and simple determination of total hexavalent chromium. than other currently using methods. The s-diphenylcarbazide method proposed by the U.S. National Institute for Occupational Safety and Health has low recovery rate(15.67 - 48.20%) due to interference, iron chloride and nickel chloride. A microwave oven technique has high recovery rate(about 70%) of insoluble hexavalent chromium. For the difference of ionic charges of $Cr^{+3}$-ethylenediamine tetraacetic acid(EDTA) chelate and $CrO_4{^{-2}}$, we could detect them simultaneously by ion exchanged high performance liquid chromatography. The confirmation of $Cr^{+3}$ and $Cr^{+6}$ were checked by fraction collector and flameless atomic absorption spectrometer. We observed that the small amount of hexavalent chromium is converted to trivalent chromium due to enhancement of chromium reduction by $Fe^{+3}$ or $Ni^{+2}$. As a result of this study, on the analysis of insoluble hexavalent chromium with microwave oven was used for, it may be better and more precise analysis after pretreatment by 2% NaOH-3% $Na_2CO_3$ and then analysis UV-spectrophotometer. It should be done for various studies on insoluble hexavalent chromium on the basis work environmental monitoring so called welding, painting etc.

• Resources Recycling
• /
• v.13 no.5
• /
• pp.28-36
• /
• 2004

The extraction of platinum group metals such as Pt, Pd and Rh from spent automobile catalyst has been investigated by leaching in HCl solutions using $HNO_3$ or NaOCl as a oxidant. The effect of type and amount of oxidant, reaction time and pulp density on the extraction of platinum group metals was examined. Platinum group metals were recovered by the cementation method using aluminum as a reducing agent. The extraction ratio was higher when NaOCl was used as a oxidant. The optimum leaching conditions were obtained to be: HCl 8 M, the amount of NaOCl 1.4 mole, leaching temperature $90^{\circ}C$, leaching time 180 minutes, pulp density 400g/L. Under the optimum conditions, the extraction of Pt, Pd and Rh were 96.1%, 93.6% and 77.3%, respectively. With the addition of 2.0g of aluminum which corresponds to 28 equivalent the reduction were 98% for Pt. 98.8% for Pd and 65.3% for Rh, respectively.

• Resources Recycling
• /
• v.13 no.5
• /
• pp.45-50
• /
• 2004

To investigate the characteristics of phases formed in iron carbides, super iron carbide was synthesized from hematite fines with $CO-H_2$ gas mixture after reduction under $H_2$ gas at $600^{\circ}C$. Before carburization, the surface of iron powder reduced was pre-treated in the atmosphere of 0.05 vol% $NH_3$-Ar. The synthesized iron carbides were comprehensively explored by C/S analyzer(Low C/S determinator), M$\"{o}$ssbauer spectroscopy, X-ray diffraction patterns(XRD), scanning electron microscopy(SEM), transmission electron microscopy(TEM), and Raman spectroscopy at various reaction time of 5, 10, 15, 20, 25, 30, and 35 min, respectively. By adding a small amount of $NH_3$ gas, the super iron carbides containing 10 wt% carbon were synthesized, and its addition stabilized iron carbides. It was found that the $NH_3$ treatment played a major role in the formation of iron carbide without decomposition($Fe_3C{\to}$3Fe+C) of iron carbides and precipitation of free carbon. It also succeed to synthesize super iron carbide, $Fe_5C_2$, as a stable single phase without involving Fe and $Fe_3C$ phases.