• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.5
• /
• pp.65-73
• /
• 2006

When a satellite separates from the launch vehicle, an initial high angular rate or a tip-off rate is generated. B-dot logic is generally used for controlling the initial tip-off rate. However, it has the disadvantage of taking a relatively long time to control the initial tip-off rate. To solve this problem, this paper suggests a new detumbling control method to be able to adapt to micro/nanosatellite with the pitch bias momentum system. Proposed detumbling method was able to control the angular rate within 20 minutes which is significantly reduced compared to conventional methods. Since the previous wheel start-up method cannot be used if the detumbling controller proposed by this paper is used, a method is also proposed for bringing up the momentum wheel speed to nominal rpm while maintaining stability in this paper. The performance of the method is compared and verified through simulation. The overall result shows much faster control time compared to the conventional methods, and achievement of the nominal wheel speed and 3-axes stabilization while maintaining stability.

• Journal of the Korean Magnetics Society
• /
• v.4 no.3
• /
• pp.239-243
• /
• 1994

$NiFe/TbCo/Si_3N_4$ thin films were fabricated, which can be employed as dualOongitudinal and transverse) biased magnetoresistive elements utilizing surface magnetic exchange at the interface of NiFe/TbCo films. When Tb area percent was 36 % and substrate bias was not applied, magnetic exchange fields of 100~180 Oe were obtained. The thicknesses of NiFe, TbCo and $Si_3N_4$(Protective layer) were $470\;{\AA},\;2400\;{\AA}\;and\;600\;{\AA}$, respectively. Magnetoresistance ratio of 1.45 % was obtained using NiFe films fabricated with 1000 W power and 2.5 mTorr of Ar pressure. The MR ratio of microstructured elements was reduced to 1.31 % and the MR response curves were shown not to saturate due to demagnetizing fields of the elements. When elements were fabricated with $36^{\circ}$ of misalignment with respect to the exchange field direction using films having 150 Oe exchange field, MR response curve was shifted by 85 Oe, and the operating point of the device shifted to the linear region of the response. Also, the Barkhausen noise was eiminated due to longitudinal bias field originating from the exchange field.

• Journal of the Korean Magnetics Society
• /
• v.14 no.1
• /
• pp.13-17
• /
• 2004

We have investigated the effect of Hf insertion in the Al oxide tunnel barrier on the properties of magnetic tunnel junctions (MTJs). MTJs with Hf inserted barrier show the higher tunnel magnetoresistance (TMR) ratio and less temperature and bias voltage dependence of TMR than MTJs with a conventional Al$_2$O$_3$ barrier. The enhancement of TMR ratio and the reduction of the temperature and bias voltage dependence might be due to the reduction of defects in the barrier. Al-Hf oxide was formed by depositing Al and Hf simultaneously, and oxidizing the compound films. The TMR ratio of 36% was almost the same value as that with Hf inserted barrier. This implies that the inserted Hf layers mixed with Al layers during deposition or oxidation, and they might form Al Hf oxide barriers. This compound Al Hf oxide formation may be responsible to reduction of defect concentration which enhanced the TMR ratio and reduced temperature and bias-voltage dependence.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1968-1970
• /
• 1996

We investigate a surface-micromachined polysilicon microgyroscope, whose resonant frequencies are electrostatically-tunable after fabrication. The microgyroscope with two oscillation nudes has been designed so that the resonant frequency in the sensing mode is higher than that in the actuating mode. The microgyroscope has been fabricated by a 4-mask surface-micrormachining process, including the deep RIE of a $6{\mu}m$-thick LPCVD polycrystalline silicon layer. The resonant frequency in the sensing mode has been lowered to that in actuating mode through the adjustment of an inter-plate bias voltage; thereby achieving a frequency matching at 5.8kHz under the bias voltage of 2V in a reduced pressure of 0.1torr. For an input angular rate of $50^{\circ}/sec$, an output signal of 20mV has been measured from the tuned microgyroscope under an AC drive voltage of 2V with a DC bias voltage of 3V.

• Atmosphere
• /
• v.16 no.3
• /
• pp.203-213
• /
• 2006

The objective of this paper is to investigate the effects of physical parameterization on the simulation of a snowfall event over Korea caused by air-mass transformation by using the PSU/NCAR MM5. A heavy snowfall event over Korea during 3-5 January 2003 is selected. In addition to the control experiments employing simple-ice microphysics scheme, MRF PBL scheme, and original surface layer process, three consequent physics sensitivity experiments are performed. Each experiment exchanges microphysics (Reisner Graupel), boundary layer (YSU PBL) schemes, and revised surface layer process with a reduced thermal roughness length for the control run. The control run reproduces an overall pattern of snowfall over Korea, but with a high bias by a factor of about 2. As revealed in the previous studies, the cloud microphysics and PBL parameterizations do not show a significant sensitivity for the case of snowfall. A more sophisticated cloud processes does not reveal a discernible effect on the simulated snowfall. Further, high bias in snowfall is exaggerated when a more realistic PBL scheme is employed. On the other hand, it is found that the revised surface layer process plays a role in improving the prediction of snowfall by reducing it. Thus, it is found that a realistic design of surface layer physics in mesoscale models is an important factor to the reduction of systematic bias of the snowfall over Korea that is caused by air-mass transformation over the Yellow sea.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.450-450
• /
• 2012

In recent days, advances in ZnO-based oxide semiconductor materials have accelerated the development of thin-film transistors (TFTs), which are the building blocks for active matrix flat-panel displays including liquid crystal displays (LCD) and organic light-emitting diodes (OLED). In particular, the development of high-mobility ZnO-based channel materials has been proven invaluable; thus, there have been many reports of high-performance TFTs with oxide semiconductor channels such as ZnO, InZnO (IZO), ZnSnO (ZTO), and InGaZnO (IGZO). The reliability of oxide TFTs can be improved by examining more stable oxide channel materials. In the present study, we investigated the effects of an ALD-deposited water vapor permeation barrier on the stability of ZnO and HfZnO (HZO) thin film transistors. The device without the water vapor barrier films showed a large turn-on voltage shift under negative bias temperature stress. On the other hand, the suitably protected device with the lowest water vapor transmission rate showed a dramatically improved device performance. As the value of the water vapor transmission rate of the barrier films was decreased, the turn-on voltage instability reduced. The results suggest that water vapor related traps are strongly related to the instability of ZnO and HfZnO TFTs and that a proper combination of water vapor permeation barriers plays an important role in suppressing the device instability.

• Journal of Korean Academy of Nursing
• /
• v.48 no.2
• /
• pp.123-142
• /
• 2018

Purpose: This study was conducted to evaluate the effectiveness of non-pharmacologic interventions in chemotherapy-induced peripheral neuropathy (CIPN). Methods: PubMed, Cochrane Library CENTRAL, EMBASE, CINAHL, and several Korean databases (Until August 2017) were searched. The main search strategy combined terms for peripheral neuropathy and presence of neoplasms. The risk of bias was assessed using the Cochrane's Risk of Bias tool for randomized studies and the Risk of Bias Assessment tool for non-randomized studies. To estimate the effect size, a meta-analysis of the studies was performed using the Rev Man 5.3 program of the Cochrane Library random-effects models were used in the analyses. Results: Twenty-two studies with a total of 954 participants met the inclusion criteria. Of the 22 studies, 12 were used to estimate the effect size of the non-pharmacologic interventions. The non-pharmacologic interventions used in patients with CIPN were exercise, acupuncture, massage, and foot bath. The acupuncture significantly reduced CIPN symptoms and signs (d=-0.71) and CIPN pain (d=-0.73) (p<.001). Massage and foot bath were also effective in reducing CIPN symptoms (d=-0.68; 95% CI=-1.05, -0.30; p<.001; $I^2=19%$).Exercises were effective in improving muscle strength and endurance(d=-0.55) and quality of life (d=-2.96), but they were not significantly effective in improving CIPN. Conclusion: Although these results provide little evidence of the effectiveness of acupuncture, massage, and foot bath in the treatment of CIPN, they suggest that these interventions can reduce CIPN symptoms in patients with cancer. However, the findings of this study should be interpreted with caution as there is a relative lack of data in this field, and additional well-designed studies are needed. PROSPERO registration: CRD42017076278.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.6
• /
• pp.372-376
• /
• 2018

The effects of off-state bias stress on the characteristics of p-type poly-Si TFT were investigated. To reduce the gate-induced drain leakage (GIDL) current, the off-state bias stress was changed by varying Vgs and Vds. After application of the off-state bias stress, the Vgs causing GIDL current was dramatically increased from 1 to 10 V, and thus, the Vgs margin to turn off the TFT was improved. The on-current and subthreshold swing in the aged TFT was maintained. We performed a technology computer-aided design (TCAD) simulation to describe the aged characteristics. The aged-transfer characteristics were well described by the local charge trapping. The activation energy of the GIDL current was measured for the pristine and aged characteristics. The reduced GIDL current was mainly a thermionic field-emission current.

• International Journal of Advanced Culture Technology
• /
• v.9 no.1
• /
• pp.16-21
• /
• 2021

As the average age of national veterans has increased from 69 years old(2011) to 71 years old(since 2015) over the past five years, the overall medical service cost of veterans has increased by about 20%. The main cause of this phenomenon is 'ultra-aging', which accounts for 67% of veterans, while the proportion of health insurance patients aged 70 or older is 9%. Therefore, it is judged that the analysis of the trend of use of medical services at veterans hospitals in each region that is in charge of severe medical services of national veterans can serve as an opportunity to seek countermeasures for the severe medical system of national veterans. First of all, based on the details of major medical expenses (hospitalization, outpatient, pharmaceutical expenses) by region for the last 10 years(2010-2019), data significance was performed through a chi-square test, and the Central Veterans Hospital and Non-Central Veterans Hospital using EXCEL. 'Expected frequency' was calculated by year. By applying the CHITEST(observation frequency, expected frequency) function again, the p-value(p<0.05) was calculated, and the profit bias of each region's veterans hospital could be determined. The specific research method is for the last 10 years(2010-2019) for state-sponsored patients_outpatient treatment income, state-sponsored patients_hospitalization income, exempt patients_outpatients at the Central Veterans Hospital, Busan Veterans Hospital, Gwangju Veterans Hospital, Daegu Veterans Hospital, and Daejeon Veterans Hospital. A one-way analysis of variance was conducted to verify the significance of the difference between group averages on the status of 5 medical revenues of veterans hospitals in each of the 5 regions, including medical treatment income, reduced patients_hospitalization income, and reduced patients_medicine expenses. It was found to be significant(p<0.05) at all levels, including region and type. Finally, the bias in the profit structure of regional veterans hospitals was the highest in 2017(p=0.0004) and the lowest in 2013(p=0.0349). In addition, in the profit structure of the Veterans Hospital, the year in which the'regional' variable worked the most was 2019, and the year with the least affected was 2010. The order of the former is Jungang(=31,674,713), Busan(=12,314,614), Gwangju(=11,957,038), Daegu(=10,168,015), and Daejeon(=6,991,034), and the order of the latter is Jungang(=57,868,791), and Busan(=19,183,194). Gwangju(=17,904,712), Daegu(=15,656,034), and Daejeon(=14,377,395). In conclusion, the profit bias of veterans hospitals repeatedly raced the lowest(p=0.01986) and highest(p=0.03499) for the past five years(2010-2014) year by year, with the 'regional' variable being the most in the veterans hospital's profit structure It was identified as a major influence factor. On the other hand, for the last 5 years (2015-2019), the influence factors of the'regional' variable every year were in 2015(p=0.02015), 2016(p=0.01741), 2017(p=0.00045), and 2018(p=0.00394). in 2019(p=0.00227), a significant difference was confirmed at a very low level.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.3
• /
• pp.293-301
• /
• 2011

The ionospheric delay is the largest error source in GPS positioning after the SA effect has been turned off in May, 2000. In this study, we used 44 permanent GPS stations being operated by National Geographic Information Institute (NGII) to estimate Total Electron Content (TEC) based on pseudorange measurements phase-leveled by a linear combination with carrier phases. The Differential Code Bias (DCB) of GPS satellites and receivers was estimated and applied for an accurate estimation of the TEC. To validate our estimates of DCB, changes of TEC values after DCB application were investigated. As a result, the RMS error went down by about an order of magnitude; from 35~45 to 3~4 TECU. After the DCB correction, ionospheric TEC maps were produced at a spatial resolution of $1^{\circ}{\times}1^{\circ}$. To analyze the effect of the number of sites used for map generation on the accuracy of TEC values, we tried 10, 20, 30, and 44 stations and the RMS error was computed with the Global Ionosphere Map as the truth. While the RMS error was 5.3 TECU when 10 sites are used, the error reduced to 3.9 TECU for the case of 44 stations.