• Clinical and Experimental Pediatrics
• /
• v.50 no.12
• /
• pp.1200-1205
• /
• 2007

Purpose : We performed this study to investigate the outcome of surfactant replacement therapy (SRT) in above nearterm neonates who were required mechanical ventilatory care due to meconium aspiration pneumonia (MAP), respiratory distress syndrome (RDS) or other severe pneumonia (PN). Methods : 48 patients, gestational period ${\geq}36weeks$, who were admitted in NICU of Dongsan Medical Center, Keimyung University between July 1999 and June 2004 were enrolled. They were divided into three groups, MAP group (15 cases), RDS group (27 cases) and PN group (6 cases). All patients were received SRT and evaluated several clinical data (gestational age, oxygen index, duration of ventilator care) and outcome (complications and mortality rate) between pre-SRT and post-SRT. The mean dose of surfactant (modified bovine surfactant, Newfacten, Yuhan Co., Seoul, Korea) was 120 mg/kg. Results : Among each groups, mean pre-SRT OI was higher in MAP group ($21{\pm}3.2$) than other groups, mean duration (days) of ventilatory care and oxygen therapy were similar distributions. Compared with pre-SRT values, significant improvements (P<0.05) in mean values for FiO2 and oxygenation index were documented at 12 hours after SRT. Early complications (persistent pulmonary hypertension of newborm, pneumothorax) and survival rate were lower in MAP group. Within RDS group, earlier SRT (given before 12 hours of life) revealed significantly lower early complication rate than later SRT (given after 12 hours of life) (13.3% vs 58.3%, P<0.05) Conclusion : Our study suggested that SRT seems to be an effective therapy in above nearterm neonates with severe pulmonary disease, and earlier SRT tends to reduce complications in RDS group than later therapy.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.11 s.353
• /
• pp.48-57
• /
• 2006

This work describes a 12b 200KHz 0.52mA $0.47mm^2$ algorithmic ADC for sensor applications such as motor controls, 3-phase power controls, and CMOS image sensors simultaneously requiring ultra-low power and small size. The proposed ADC is based on the conventional algorithmic architecture with recycling techniques to optimize sampling rate, resolution, chip area, and power consumption. The input SHA with eight input channels for high integration employs a folded-cascode architecture to achieve a required DC gain and a sufficient phase margin. A signal insensitive 3-D fully symmetrical layout with critical signal lines shielded reduces the capacitor and device mismatch of the MDAC. The improved switched bias power-reduction techniques reduce the power consumption of analog amplifiers. Current and voltage references are integrated on the chip with optional off-chip voltage references for low glitch noise. The employed down-sampling clock signal selects the sampling rate of 200KS/s or 10KS/s with a reduced power depending on applications. The prototype ADC in a 0.18um n-well 1P6M CMOS technology demonstrates the measured DNL and INL within 0.76LSB and 2.47LSB. The ADC shows a maximum SNDR and SFDR of 55dB and 70dB at all sampling frequencies up to 200KS/s, respectively. The active die area is $0.47mm^2$ and the chip consumes 0.94mW at 200KS/s and 0.63mW at 10KS/s at a 1.8V supply.

• Korean Journal of Environmental Agriculture
• /
• v.30 no.2
• /
• pp.169-178
• /
• 2011

BACKGROUND: This study aimed to estimate the measurement uncertainty associated with determination of cadmium and lead from tomato paste by ICP/MS. The sources of measurement uncertainty (i.e. sample weight, final volume, standard weight, purity, molecular weight, working standard solution, calibration curve, recovery and repeatability) in associated with the analysis of cadmium and lead were evaluated. METHODS AND RESULTS: The guide to the expression of uncertainty was used for the GUM (Guide to the expression of Uncertainty in Measurement) and Draft EURACHEM/CITAC (EURACHEM: A network of organization for analytical chemistry in Europe/Co-Operation on International Traceability in Analytical Chemistry) Guide with mathematical calculation and statistical analysis. The uncertainty components were evaluated by either Type A or Type B methods and the combined standard uncertainty were calculated by statistical analysis using several factors. Expected uncertainty of cadmium and lead was $0.106{\pm}0.015$ mg/kg (k=2.09) and $0.302{\pm}0.029$ mg/kg (k=2.16), on basis of 95% confidence of Certified Reference Material (CRM) which was within certification range of $0.112{\pm}0.007$ mg/kg for cadmium (k=2.03) and $0.316{\pm}0.021$ mg/kg for lead (k=2.01), respectively. CONCLUSION(s): The most influential components in the uncertainty of heavy metals analysis were confirmed as recovery, standard calibration curve and standard solution were identified as the most influential components causing uncertainty of heavy metal analysis. Therefore, more careful consideration is required in these steps to reduce uncertainty of heavy metals analysis in tomato paste.

• Applied Biological Chemistry
• /
• v.23 no.3
• /
• pp.157-165
• /
• 1980

Kojis were prepared from the different starch raw materials such as glutinous rice, barley rice, wheat flour and sweet potato, and were tested in an effort to reduce production cost and to improve quality of Kochuzang(red pepper paste). During the starting period of Koji preparation, there were less significant changes in pH; however, pH decreased somehow in the case of sweet potato, whereas it increased for the other Kojis. In general, the highest acidity was obtained after 72 hours of Koji preparation. Total nitrogen, soluble nitrogen and amino-nitrogen content increased in order of wheat flour, barley rice, and glutinous rice; Kojis they were markedly produced between 72 and 96 hours of Koji preparation. The maximum amount of reducing sugar was observed between 48 and 72 hours of Koji preparation during this period the reducing sugar content varied widely depending on starch source. Sweet potato Koji produced the highest level of ethyl alcohol content after 72 hours of Koji preparation; for the other Koji the same trends were observed after 24 hours. The starch liquefying activities have reached the highest level after 96 hours and for glutinous rice and barley rice; however, they kept on increasing until 120 hours for wheat flour and sweet potato. Koji Starch liquefying and saccharogenic amylase activities tended to increase in order of sweet potato, glutinous rice, barley rice and wheat flour. Kojis Various protease activities were measu-red during the Koji preparation, and they increased in order of alkali, neutral and acidic protease.

• Journal of Navigation and Port Research
• /
• v.42 no.4
• /
• pp.245-252
• /
• 2018

A method of transmitting an alert signal in case of man-overboard (MOB) systems in a small fishing vessel navigating within coastal area is being operated as VHF-DSC equipment via a distress alert button and V-P ass Equipment via alert button or beacon separation. However, a small fishing vessel with a couple of crews on board is an inappropriate way to alert a man-overboard condition. However, internationally, MOB equipment using VHF-DSC, AIS, and Bluetooth technologies is used to transmit alert signals directly to the mother ship and other radio stations. In order to analyze the performance and technology of the MOB equipment operating in foreign countries, it was confirmed that the alarm signal can be received within a maximum of one nautical mile when the MOB device is on the water surface. An MOB device that meets domestic conditions needs to send an alarm signal to a station within the VHF communication range. However, in order to reduce the false alert signal, it is most appropriate to operate the VHF-DSC radio equipment installed on the ship remotely. Analysis of various technologies connecting the MOB and the VHF-DSC revealed that the Bluetooth system has advantages such as device miniaturization. When an emergency signal is transmitted from the MOB device, it can be received by a dedicated receiver and recognized through an external input terminal of the VHF-DSC equipment generating its own alarm. If the emergency situation cannot be processed at the mother ship, a distress alert is sent to all radio stations via VHF-DSC for response under emergencies faced by small fishing vessels.

• Journal of the Korean GEO-environmental Society
• /
• v.22 no.10
• /
• pp.21-29
• /
• 2021

Most concrete gravity-type dams in and out of the country were constructed by column method to control cracks caused by concrete hydration heat generated during construction, resulting in a certain level of leakage after impoundment through various causes, such as contraction joints and construction joints. However, due to the characteristics of concrete structures that shrink and expand according to temperature, concrete dams have vertical joints and drains to allow penetration. PVC waterproof shows excellent effects in completion of the dam, which however increases the possibility of interfacial failure due to different thermal expansion. Other causes of penetration may include problems with quality control during installation, generation of cracks due to heat of hydration of concrete, waterproofing methods, etc. In the case of Bohyunsan Dam in Yeongcheon, North Gyeongsang Province, the amount of drainage in the gallery was checked and underwater, and it was confirmed that there are many penetrations from drainage holes connected to vertical joints, and that some of the PVC waterproofs are not fully operated. As a new method to prevent penetration through vertical joints, D.S.I.M. (Dam Sealing Innovation Method) developed by World E&C was applied to Bohyunsan Dam and checked the amount of drainage in the gallery. As a result of first testing three most leaking vertical joints, the drain in the gallery was reduced by 87% on the average and then applied to the remaining 13 locations, which showed a 83% reduction effect based on the total drain in the gallery. Summing up these results, it was found that D.S.I.M. preventing water leakage from the upstream face is a valid construction method to reduce the water see-through and penetration quantity seen in downstream faces of concrete dams. If D.S.I.M. is applied to other concrete dams at domestic and abroad, it is expected that it will be very effective to prevent water leakage through vertical joints that are visible from downstream faces.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.6
• /
• pp.489-495
• /
• 2020

Whereas the control of the hydration heat in mass concrete has been important as the concrete structures enlarge, many conventional strategies show some limitations in their effectiveness and practicality. Therefore, In this study, as a solution of controling the heat of hydration of mass concrete, a method to reduce the heat of hydration by controlling the hardening of cement was examined. The reduction of the hydration heat by the developed Phosphate Inorganic Salt was basically verified in the insulated boxes filled with binder paste or concrete mixture. That is, the effects of the Phosphate Inorganic Salt on the hydration heat, flow or slump, and compressive strength were analyzed in binary and ternary blended cement which is generally used for low heat. As a result, the internal maximum temperature rise induced by the hydration heat was decreased by 9.5~10.6% and 10.1~11.7% for binder paste and concrete mixed with the Phosphate Inorganic Salt, respectively. Besides, the delay of the time corresponding to the peak temperature was apparently observed, which is beneficial to the emission of the internal hydration heat in real structures. The Phosphate Inorganic Salt that was developed and verified by a series of the aforementioned experiments showed better performance than the existing ones in terms of the control of the hydration heat and other performance. It can be used for the purpose of hydration heat of mass concrete in the future.

• Journal of Chest Surgery
• /
• v.35 no.5
• /
• pp.365-368
• /
• 2002

Background: Coronary artery bypass grafting(CABG) imposes large amount of medical costs, which are greatly affected by the surgical approach, quality of perioperative care and associated co-morbidities. Recently, off-pump CABG(OPCAB) has been introduced and performed with increasing frequency. To evaluate the efficacy of OPCAB in view of financial impact, we analyzed the costs and medical resources of OPCAB and compared with conventional CABG. Material and Method: From January 1998 to July 1999, 184 patients underwent CABG operation; 111 patients with OPCAB(group I) and 73 patients with conventional CABG(group II). We prospectively collected clinical data including risk factors and retrospectively reviewed the hospital resources. Result: Preoperative parameters including risk factors, postoperative mortality, morbidity and length of hospital stay were not different between the two groups, Duration of stay in the intensive care unit(ICU) (51.3 vs 128.3 hours, p<0.01) and ventilator, support time(14.9 vs 56.2 hours, p<0.01) were significantly shorter in the OPCAB group. Total hospital coats were 17,220,000 add 21,250,000(Korean Won) in group I and II, respectively(p<0.01). There were significant differences in operation fee, costs for operative materials, transfusion and diagnostic radiology between two groups. In group I, all the resources except diagnostic radiology were significantly decreased compared with group II. Conclusion: OPCAB has a beneficial effect on hospital charge and resource utilization. Shorter duration of the ICU stay and ventilatory support time may reduce the total hospital costs.

• Journal of Distribution Research
• /
• v.5 no.2
• /
• pp.49-68
• /
• 2001

In this chapter, we summarize the results on the optimal location selection and present limitation and direction of research. In order to reach the objective, this study selected and tested the interaction model which obtains the value of co-ordinates on location selection through the optimization technique. This study used the original variables in the model, but the results indicated that there is difference in reality. In order to overcome this difference, this study peformed market survey and found the new variables (first data such as price, quality and assortment of goods, and the second data such as aggregate area, and area of shop, and the number of cars in the parking lot). Then this study determined an optimal variable by empirical analysis which compares an actual value of market share in 1988 with the market share yielded in the model. However, this study found the market share in each variables does not reflect a reality due to an assumption of λ-value in the model. In order to improve this, this study performed a sensitivity analysis which adds the λ value from 1.0 to 2.9 marginally. The analyzed result indicated the highest significance with the market share ratio in 1998 at λ of 1.0. Applying the weighted value to a variable from each of the first data and second data yielded the results that more variables from the first data coincided with the realistic rank on sales. Although this study have some limits and improvements, if a marketer uses this extended model, more significant results will be produced.

• Childhood Kidney Diseases
• /
• v.14 no.2
• /
• pp.174-183
• /
• 2010

Purpose : The organisms causing peritonitis and their antibiotic sensitivities vary in different regions and centers, and these data are necessary to establish regional treatment guidelines. The aim of this study was to investigate the changes in incidence and characteristics of the organisms that cause peritonitis in children undergoing peritoneal dialysis (PD) during recent 10 years. Methods : We retrospectively collected and analyzed the data from medical records of 110 children on PD during the period from 2000 to 2010. Results : One hundred and forty episodes of peritonitis have occurred in 57 patients. The overall incidence of peritonitis was 0.43 episodes/patient year, and similar incidence have been maintained since 2003. Sixty percent of the patients experienced peritonitis within 1 year of PD, and all patients commencing PD in infancy experienced peritonitis. Gram positive (G (+)), gram negative (G (-)) organisms and fungi were cultured in 58%, 38%, and 4.1% respectively and cultures were negative in 13.6%. Staphylococcus was the most common G (+) organism, and Pseudomonas and Acinetobacter were 2 most frequent G (-) organisms isolated. Fifty-six percent of the G (+) organisms were sensitive to first generation cephalosporin and 91% of G (-) pathogens were sensitive to ceftazidime. Methicillin-resistance rate was not higher in children less than 2 years of age than in those more than 2 years. Conclusion : An additional breakthrough has to be made to further reduce the incidence of peritonitis. Treatment guideline customized for peritonitis in Korean children on PD need to be established through a nationwide co-work.