• Korean Journal of Plant Resources
• /
• v.19 no.1
• /
• pp.133-138
• /
• 2006

In order to enhance the components of bioactive ginsenosides and the manufacturing process of red ginseng, we developed the simplified method for red ginseng production. The red ginseng extract was prepared from red ginseng produced with the simplified method, and the production rate of extract ($62^{\circ}$ brix) was more than 60%. The ginsenosides of red ginseng were purified and analyzed by HPLC using ELSD. Ginsenoside-$Rg_3,\;Rh_2$ and $Rh_1$, specific artifacts found only in red ginseng, were detected by HPLC. Especially, contents of ginsenoside-$Rg_3$ and Rh1 were detected high than two times in red ginseng produced the simplified method compared to commercial products.

• Journal of Ginseng Research
• /
• v.4 no.1
• /
• pp.72-87
• /
• 1980

Red ginseng tails were extracted with ethanol solutions over a range of concentrations and temperature conditions. Investigations were carried out to study the effects of treatments on yields, soluble solids, saponin and precipitate occured in red ginseng extract beverage during storage. It was found that: (1) Higher concentration of ethanol at low temperature resulted in less yield of crude extract (2) The amount of precipitate in the non-purified extract beverage were less with decrease in ethanol concentration used (3) The treatment for purification of extracts and storage of purified extract at 37$^{\circ}C$ for 6 months had no effect on HPLC chromatogram pattern of saponins (4) The amount of purified extract decreased by purification treatment and more decrease was found as the temperature and concentration of ethanol increased. For Preparation of red ginseng extract beverage, the treatment of extracts with ethanol at low temperature was found to be more effective to minimize precipitation in tile beverage.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.6
• /
• pp.1007-1016
• /
• 2023

In this study, the effect of functional substances such as polyphenols and flavonoids contained in large quantities in red ginseng and herbal medicines on the antioxidant activity properties and flavor effect were investigated by increasing the content and activity of functional ingredients by convert red ginseng through a steaming heat-drying process compared to the traditional dry processing method of ginseng and herbal medicines. According to the experimental results, the addition of pre-heat treatment significantly increased antioxidant properties such as DPPH radical scavenging ability, polyphenols, and flavonoids. In addition, during the steaming and heat-dried red ginseng manufacturing process, the amino-carbonyl browning reaction was promoted, resulting in increased brownness and a savory flavor. However, the content of ginsenosides, the main medicinal ingredient in red ginseng, became the main cause of the bitter and harsh taste. In addition, the bitter and harsh taste of red ginseng has been significantly improved by roasting and producing powder, but on the other hand, Radix Angelicae sinensis, polymorphic angelica and Peony, which are used as main medicinal ingredients in oriental medicine for nutritional tonic prescriptions such as 10 herbal medicine and 4 herbal medicine have a very strong herbal medicine-specific flavor and have a bitter and harsh taste. It is so strong that in order to use it as an instant extraction material, it was reviewed that a steaming and heating manufacturing method was needed during the manufacturing process.

• Journal of Ginseng Research
• /
• v.33 no.3
• /
• pp.229-233
• /
• 2009

The centrifugal coating granulating system, a new method of preparing red ginseng extract pills, has been developed. The red ginseng extract was first powdered with 85.5% of edible ethanol and dried for 3 to 4 hours at 50$^{\circ}C$. The powders were fed in chamber of centrifugal coating granulating system and then granulated, sequentially. The centrifugal system operated at 20 to 50$^{\circ}C$ of inlet temperature, 1 to 1,000 g/min of feeding speed, 60 to 70$^{\circ}C$ of atmosphere temperature of intake, 3.0 to 4.0 bar of spray atmosphere pressure, 1,000 to 1,500 rpm of centrifugal plate speed and 25 to 40$^{\circ}C$ of outlet temperature. The product yield was about 85% and preparation time was 7 to 8 hours. Especially, major ginsenoside components of red ginseng were not decomposed after processing of red ginseng extract pill.

• Korean Journal of Medicinal Crop Science
• /
• v.8 no.2
• /
• pp.146-150
• /
• 2000

In order to enhance the yield and physical property of Korean red ginseng extract, preheating stage was added to the inception of red ginseng manufacturing process and its effect was investigated. Preheating of raw ginseng at $70^{\circ}C$ for 2 hour followed by steaming for 2 hours increased the yield of water and 60% alcohol extract most effectively. Those yields were the highest at the same condition as above except preheating time shortened to 1 hour at $70^{\circ}C$. Steaming time had little effect on the yield of water and 60% alcohol extract. The content of starch in red ginseng was reduced effectively by preheating of raw ginseng at $70^{\circ}C$. The brown color intensity of red ginseng increased in proportion to preheating temperature in the range of $50-70^{\circ}C$. However, there was no increase in the color intensity at $80^{\circ}C$.

• Culinary science and hospitality research
• /
• v.17 no.1
• /
• pp.171-183
• /
• 2011

This research is to figure out the manufacture proper1ies and the effect of adding red ginseng powder into cookies. When adding red ginseng powder into wheat, there was no significant change in moisture content while the amount of WRC and AWFC increased significantly. In the manufacturing and quality characteristics, there was no noticeable change in thickness and spreadability. Also, wheat cookies containing red ginseng powder didn't show significant differences either and the control plot had the biggest diameter. The change of chromaticity showed that L-value and b-value seemed to significantly decrease while a-value increased a lot In other words, the more ginseng powder was added, the darker its external colour became. In the organic characteristics, the control plot showed the best result in volume, crust, top grain and in almost every part. The volume had the most satisfying result with 6% of red ginseng powder added, and there was not much difference among the groups added with red ginseng powder. Generally, adding up tp 12% of ginseng powder was found best when making cookies.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.2
• /
• pp.305-314
• /
• 2017

The purpose of this study was to develop the high efficiency of ginseng by using microwave low temperature vacuum drying technology. In red ginseng manufacturing processes, the study results compared the hot-air drying red ginseng dried during 24hours in $60-70^{\circ}C$ and redried during 72hours in $40^{\circ}C$ after the steaming ginseng with the red ginseng dried in microwave low temperature vacuum dryer on condition that 900 watt, 2.45 MHz, 50 mmHg during 5 hours and redried during 2 hours on 750 mmHg after the steaming ginseng about observation of tissue, sensory evaluation and a change of ginsenoside and crude saponin content. As a result, the red ginseng in microwave low temperature vacuum was had high brightness, the surface turned into porosity tissue and added more flavor, decreased bitterness highly on the contrary increased sweetness at the same time that elevated the comprehensive preference. Moreover, In a short time, the content of ginsenosides $Rg_1$ and $Rb_1$ increased about sixfold, eightfold in one time zone but there were no wide difference in content of $Rg_3$ as compared to the hot-air drying red ginseng. Finally, content of crude saponin was increased widely at 10-20 minutes and stayed high crude saponin content consistently. Therefore, this result indicated that the red ginseng in microwave low temperature vacuum increased extraction yields of the ginsenosides and crude saponin through a change of porosity tissue and improved flavor and texture compare with the general hot air dried red ginseng in a short time. According to these results, that provided that could increase the preference about red ginseng.

• Food Industry And Nutrition
• /
• v.8 no.2
• /
• pp.38-42
• /
• 2003

• Food Science and Preservation
• /
• v.23 no.3
• /
• pp.319-325
• /
• 2016

This study was designed to develop a manufacturing process for ginseng concentrate with reduced unpleasant aroma and bitter taste. Two types of ginseng, white and red, were extracted under six different conditions (the 1st to the 6th step) of temperature ($65{\sim}95^{\circ}C$) and ethanol concentration (0~70%). Six extracts of each ginseng were evaluated by a sensory test, and assayed for crude saponin, ginsenosides, and acidic polysaccharides. The content of crude saponin in the extracts decreased with extraction time. There was no significant difference in the crude saponin content between white and red ginseng extracts. The yield of red ginseng extract was higher (45%) than that of white ginseng. No significant difference was observed in the acidic polysaccharide content between red and white ginseng extracts. $Rg_3$, a specific ginsenoside in red ginseng, was detected in the 1st to 6th extracts of red ginseng. Bitterness, astringency, and sourness of ginseng extracts decreased as the extraction steps proceeded. The composite of the 1st, 2nd, and 6th step extracts decreased bitterness and astringency, and the highest overall acceptance. Compared with commercial beverages, the composition of the three extracts is the desirable method to decrease the bitter and astringent tastes, and the overall unpleasant flavor of ginseng.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.7
• /
• pp.889-895
• /
• 2007

This study investigated the quality characteristics of red ginseng cheonggukjang development by a various of concentration of red ginseng extract and powder to enhance its acceptability and functional properties. In the cheonggukjang added with red ginseng extract, viscous substances, reducing sugars, and fibrinolytic activity showed higher values by the addition of red ginseng extract. The standard crude saponin content of products containing red ginseng was evaluated, and found to be suitable in cheonggukjang added with 4% red ginseng extract. In the cheonggukjang added with red ginseng powder, viscous substances, reducing sugars, and fibrinolytic activity showed a similar tendency to the cheonggukjang added with red ginseng extract. Amino type nitrogen and ammonia type nitrogen decreased by increasing the addition of red ginseng powder, and the crude saponin content of cheonggukjang with the addition of 14% red ginseng powder was suitable, in terms of manufacturing standards for products containing red ginseng. Dependent on the addition time of red ginseng in cheonggukjang, viscous substances, reducing sugars, fibrinolytic activity, amino type nitrogen, and ammonia type nitrogen showed no differences based on the addition time; however, for crude saponin content, the cheonggukjang with red ginseng added before fermentation showed a higher saponin content than the cheonggukjang with red ginseng added after fermentation. The ginsenosides $Rg_{1}$, Re, Rf, $Rh_{1}$, $Rg_{2}$, $Rb_{1}$, Rc, $Rb_{2}$, Rd and $Rg_{3}$ were detected, but ginsenoside content did not show significant difference according to addition time. In conclusion, the addition amount of red ginseng in cheonggukjang for optimum fermentation was concentration of 4% (w/w), which showed the best results in quality characteristics.