• Journal of the Korea Organic Resources Recycling Association
• /
• v.12 no.2
• /
• pp.72-81
• /
• 2004

For disposal food wastes which is about 30% portion of tatal organic wastes, vermicomposting is more environmental-friendly treatment than lanfill, incineration, etc. Recently, the interest has been increasing but there are many problems on management of vermicopmposting in field especially. This study was conducted to investigate an optimal factors, which are limit NaCl conc., the mixing rate of food wastes and casting for growth of an earthworm related to efficient vermicomposting. The limit conc. of NaCl was 0.5% and in case of feeding food wastes to earthworms as a prey only, most earthworms were dead in a few hours due to excessive degradation of organic materials and high NaCl conc. However as feeding with the casting of proper mixing rate(3:7), most earthworms were survived until finishing composting. It was investigated the increaser degree of matureness of food wastes, the higher conc. of NaCl, therefore for efficient vermicomposting, it seemed proper mixing rate of food wastes and the casting is better than matureness of food wastes. and the most suitable mixing rate was 3:7 food wastes and the casting.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.2
• /
• pp.87-91
• /
• 2011

The purpose of this study is to develop ceramic glazes for the pottery production by utilizing wasted white porcelain, celadon porcelain and bone china thrown away from the areas of Icheon and Yeoju. Most of Korean pottery manufacturers are located in the both areas. According to the XRF analysis, the wasted white porcelain contains over 67 % of silica. It is enough to make a transparent glaze without adding silica. The wasted celadon porcelain contains much $Fe_2O_3$, which is suitable for producing a celadon glaze. The wasted bone china contains 22 % of $P_2O_5$, which is suitable for making a milky white bone china glaze. As a result, it is expected that production of pottery glaze using the wasted porcelains will reduce pollution problems comes from the landfill, and obtain economic effects in terms of resources recycling. It is also expected to be utilized as alternative materials of imported ones.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.12 no.3
• /
• pp.76-85
• /
• 2004

Anaerobic decomposition of municipal solid waste (MSW) had potential adverse impacts such as the production of methane and long-term post closure on human health and the environment. It was demonstrated that aerobic degradation of MSW resulted in the reduction of a methane yield and the enhancement of stabilization of MSW. Excavated solid wastes were both aerobically and anaerobically treated in order to evaluate the effects of air injection on the stabilization of landfill site. The municipal solid waste (MSW) samples were excavated from a 10-year old landfill (operation period: 1991. 11~1994. 11), Jeonju, Korea. Excavated municipal solid wastes are primarily composed of soils and vinyl/plastics. For the two aerobic simulated lysimeters, the levels of $O_2$ ranged 1.6~23.1% and the levels of $CO_2$ ranged 1.5~15.1%, which confirmed the aerobic decomposition. Aeration did prevent methane formation. For the anaerobic simulated lysimeter, the $CO_2$ rose as $O_2$ was consumed and low levels of CH4 were produced. The pH levels ranged from 7.7 to 8.9 for anaerobic lysimeter and from 7.3 to 8.5 for aerobic lysimeters. As expected, aerobic treatment proved to enhance the removal of biodegradable materials in the excavated solid wastes when monitoring the concentration of BOD, COD, $NH_4-N$, and $NO_3-N$ in the leachate.

• Clean Technology
• /
• v.23 no.2
• /
• pp.163-171
• /
• 2017

Currently, researches on recycling and reuse of waste energetic materials have recently gained a great attention from advanced countries due to ever tightening environmental regulations. In this study, as a part of a recycling technology, the experiments and dynamic simulation of simulated moving bed (SMB) process were performed to efficiently separate TNT and RDX from their mixture, which are main components of ammunition. In order to determine the operation zone of SMB process, the retention times of TNT and RDX were measured using HPLC at different flow rates and the adsorption equilibrium of each component was obtained by using a moment method. According to the adsorption equilibrium and the triangle theory of SMB process, four operation points were determined and separation experiments were carried out by the SMB process using the solvent consisting of acetonitrile and water. Two different mixing ratios (6:4 and 1:1) of acetonitrile and water were chosen for the experiment due to the great impact of mixing ratio of the solvent on separation. The performance of SMB process was evaluated by purity, recovery, productivity and solvent consumption. Pure TNT and RDX were successfully obtained from the SMB process and the dynamic simulation for the SMB process agreed well with the experimental results. Therefore, the dynamic model could be applied for predicting the dynamic behavior of the SMB process and designing a large scale SMB process.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2006.05a
• /
• pp.90-94
• /
• 2006

The waste solution discharged from the LCD manufacturing process contains acids like nitric, acetic and phosphoric acid and metal ions such as Al, Mo and other impurities. It is important to removal of impurities to tess than 1ppm in phosphoric acid to reuse as an etchant because the residual impurities even in sub-ppm concentration in semiconductor materials play a major role on the electronic properties. In this study, we have been clearly established that a mixed system of solvent extraction, diffusion dialysis and ion-exchange technique, which made individually the most of characteristics is developed to commercialize in an efficient system for recovering the high-purity phosphoric acid. By applying vacuum evaporation, the yield of the process are almost 99% removal of nitric acid and acetic acid was achieved. And by applying the solvent extraction method with tri-octyl phosphate(TOP) as an extractant, the removal of acetic and nitric acid from the acid mixture was achieved effectively at the ratio O/A=1/3 with four stages and the stripping of nitric acid from organic phase is attained at a ration of O/A=1 with six stages by distilled water. About 97% and 76% removal of Al and Mo were achieved by diffusion dialysis. Essentially complete less than 1ppm removal of Al, Mo by using ion exchange ion resin and purification of the phosphoric acid was obtain.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.8
• /
• pp.526-533
• /
• 2008

In this study, theoretical super screen vibration analysis has been carried out to predict the dynamic characteristics of interactive waste particles. In order to approach these problems, it is necessary to have a fundamental understanding the screening process and the process of both the remaining and the passed material on a screen with several interacting screen planes based on Soldinger(1999) was discussed. Here, the vibrating screen is composed of three assemblies such as screen, wastes guide, and supported screen as shown in Fig. 1. This model is regarded vibrator as the system of screen fixed tilt plates. Then materials(or particles) of different size is to be separated by using the eccentric vibrator and classifying tilt plates. As well moisturized construction wastes is more efficient to separate than moisture-less it. In processing separate mechanism, the more materials is light, the more staying time is long. Thus much lighter construction wastes(wood, Styrofoam, etc) and heavier materials are separated by staying time delay in a super screen. The design results, separation screen were able to know that small and larger particles are conspicuous difference each motion character according to trajectory particles, and small particles raise the probability in classifying tilt plates.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.19 no.2
• /
• pp.33-40
• /
• 2011

This study was conducted for the purpose of examining stable disposal of foodwaste and possibility of multilateral use of its by-product by mixing earthworm powder and by-product generated from food waste disposal for making feed for sea fish. As a result of the study, content of crude protein (25.93%, 69.72%), crude lipid (16.91%,6.39%) crude ash (15.38%, 5.30%) in by-product of food waste and earthworm powder was higher than that in fish meals manufactured in the country, and it was judged that it is available to make good feed as a source of fatty acid as it contained C18:1n9c, 1n9t and c16:0. As for stability as a raw material for feed, it was shown that the stability was high when using the product as a raw material for feed not exceeding the standard of test items, and though change of content and ingredients to mixing ratio, it was shown that mixed specimen of fertilizer (S6) was higher, showing that it has great utilization in the future. Also, as it has more content of registered ingredients than any other raw materials for feed manufactured in the country, it is possible to be used as a substitute when manufacturing feed for sea fish. Therefore, it is judged that various studies such as economic analysis and technology of possible manufacturing will be needed in the future.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.5 no.1
• /
• pp.15-23
• /
• 1997

Commercial inocula and mature compost were added separately to food wastes in order to compare the inoculating effect on garbage decomposition. Among commercial inocula available in the market, GM (Green Microorganisms) and EM (Effective Microorganisms) were selected as test inocula. Garbage decompostion were evaluated in Volatile Solid (VS) reduction and FDA (Fluorescein DiAcetate) hydrolysis activity. VS reduction with mature compost experiment was higher than that with GM-added one. VS reduction rates were about 32% with mature compost and 27% with GM. When food wastes were treated with GM and EM based on the manufacturer's specifications, GM-added and EM-added food wastes showed only 8% and 9% of VS reduction respectively, which are much lower than those with the mature compost. FDA hydrolysis activity increased during the first 10 days of active composting periods for the composting experiments, while it decreased continuously for the experiments based on manufacturer's specifications.

• Resources Recycling
• /
• v.30 no.6
• /
• pp.28-35
• /
• 2021

An experiment was conducted to separate or recover Co and Ni using Cyanex 301 from process by-products and waste resources containing Co and Ni. To separate and recover Co and Ni from simulated leaching solutions, 10 v/v% Cyanex 301 was used as an extractant in this study; Li was not extracted. At equilibrium pH 1.5 and a phase ratio (A/O) of 1.0, 0.44% of Mg and 11.57% of Mn were extracted, and more than 99% of Co and Ni were extracted. McCabe-Thiele diagram analysis confirmed that more than 99.9% of Co and Ni could be extracted simultaneously through two-stage extraction with an extraction phase ratio (A/O) of 2. It was possible to extract Mg and Mn simultaneously through the scrubbing process. In the scrubbing process, more than 99% of Mg and 87% of Mn were scrubbed using 0.05 M of H₂SO₄, and 99.9% of Mg and more than 80% of Mn were scrubbed using 0.05 M of HCl. In the stripping process, 93% of Co and 5% of Ni were stripped selectively by 3.0 M of H₂SO₄. However, when 8.0 M of HCl was used as a stripping solution, more than 99.9% of Co and more than 90% of Ni were stripped simultaneously.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.8 no.4
• /
• pp.93-99
• /
• 2000

Treatment of shaving scrap, a chrome containing solid scrap generated by leather manufacturing process, has been so far depended on mainly incineration, soil landfill and ocean dumping, which give bad impact on environment and cause pollution. Shaving scrap generates from the mechanical work for controlling the final thickness of leather and its main components are collagen protein and pan of chromium compound. For the purpose of reusing this leather waste as resources, researches in connection with collagen fiber recovery, gelable protein recovery and liquid fertilizer is being speedily progressed. In the experiment, shaving scrap went through wet pulverizing treatment by physical and chemical methods. Then, making the leather sheet evenly, it is mixed with natural latex and every kind of binding materials in the container, and the mixtures were passed through experimental hydraulic press machine and applied to Fourdrinier machine respectively. Lastly, a test for fading out physical strength and properties of multiple-purpose of leather-like material was performed on a continuous leather sheet prepared by the experiment. In result, the physical strength and properties of leather-like material showed noticeable differences according to mixing ratio of binding materials, beating methods and the Ends of binding materials selected, and generally tear strength was the weakest property among others. Also, by the pilot scale experiment in sequence, it was possible to manufacture recycled goods made of soft and hard types of leather-like material with various performances.