• Bulletin of the Korean Chemical Society
• /
• 제26권11호
• /
• pp.1819-1822
• /
• 2005

In the search for a simple preparation method of heterogeneous catalyst, the iron porphyrins were coordinated bonded to the surface of a polymeric core-shell nanosphere. The heterogeneous catalyst was characterized by FT-IR, scanning electron microscope, and UV-vis spectrophotometer. The iron porphyrin bound core-shell nanospheres was about 470 nm in diameter and their catalytic activity for cyclohexene oxidation was similar to a homogeneous iron porphyrin in a solvent composition range of 25-75% acetonitrile/water (v/v). In addition, they could be recovered by simple centrifugation and their catalytic activity was maintained more than the third cycle.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 추계학술대회 논문집
• /
• pp.364-367
• /
• 2001

Recently social demands of fuel economy and environmental regulation require the development of light materials and new manufacturing technologies. In this point, aluminum tube hydroforming, which is satisfied with good strength-to-weight ratio and recyclability, is new innovative concept. but, up to now the level of that is relatively low. In this paper, we studied formability of different aluminum tubes in different heat treatments under internal pressure and axial feeding, and mechanical properties of aluminum tubes before and after hydroforming.

• 한국주조공학회지
• /
• 제29권1호
• /
• pp.38-44
• /
• 2009

Magnetic separation of Fe contaminated Al-Si cutting chip scraps was performed for the recyclability assessment. It was also aimed to investigate the casting and solidification characteristics of the cutting chip scraps. The magnetically separated cutting chip scraps were adequately treated for the casting procedure and test specimens were made into a stepped mold inducing different cooling rates. The test specimens were evaluated by the combined analysis of ICP, Spectroscopy, OM-image analyzer, SEM/EDS, etc. Solidification characteristics of cutting chip scraps were examined as functions of Fe content and cooling rate. It is concluded that the magnetic separation process can be utilized to recycle the Fe contaminated Al-Si cutting chip scraps in the high cooling rate foundry process.

• 펄프종이기술
• /
• 제31권4호
• /
• pp.23-29
• /
• 1999

The effect of dilute sulfuric acid treatment was examined to improve recyclability of coated brokes. Turbidity , electric conductivity , and cationic demand of the white water from coated broke prepared from an alkaline base paper was determined. Sulfuric acid treatment was found to be effective in dissolving undisintegrated substances such as binders, pigments, and fibers. The properties of papers prepared by adding the broke to pulp stock up to 30% dry weight were examined . With the increase of broke addition, retention, sizing degree and smoothness were improved ; on the other hand, formation uniformness, air permeability and internal bonding strength were decreased. The extent of improvement by broke addition was greater for the surfuric acid-treated broke than the control broke. It was concluded that the use of coated broke should be limited within 10-15% weight of the product for either type of broke.

• 한국세라믹학회지
• /
• 제52권6호
• /
• pp.502-507
• /
• 2015

We examined the photo catalytic activity and catalytic recyclability of CdSe/graphene nanocomposites fabricated via modified hydrothermal technique. The prepared composites were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) with energy dispersive X-ray (EDX), transmission electron microscopy (TEM), Raman spectroscopic analysis, and X-ray photoelectron spectroscopy (XPS). The photocatalytic behavior was investigated through decomposition of RBB as a standard dye under visible light radiation. Our results indicate that there is significant potential for graphene based semiconductor hybrids materials to be used as photocatalysts under visible light irradiation for the degradation of organic dyes from industry effluents.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2011년도 춘계학술대회
• /
• pp.491-494
• /
• 2011

정보화 시스템 구축에 필요한 유형 무형의 모든 기술과 수단을 아우르는 간접적 가치창출에 무게를 두는 기술을 뜻하는 정보통신 용어로 정보통신 산업의 발전과 함께 정보혁명을 주도하는 기술로 부각되었다. 본 논문에서는 에너지 및 환경문제를 극복하기 위한 Green IT 주요품목에 대한 시장 및 산업동향과 녹색성장 기반구축 현황에 대해 알아본다. 여러 관련자료를 발췌 또는 편집하여 개괄적으로 소개하도록 한다.

• 한국기계가공학회지
• /
• 제11권5호
• /
• pp.137-141
• /
• 2012

In order to increase recyclability of new material, aluminium-lithium alloy(Al2050-T84), the chip is compressed in the type of cylinder after machining. This study is to review the effect of environmental condition such as temperature change and salt during the transportation by sea on the corrosion at the surface and inside of the compressed chip, and an effective packing method is presented in this paper.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.65-70
• /
• 2001

Six recycling plants have started operation for recycling scrap home appliances since the spring of 2000 in Taiwan. The performance of the plants has not yet been measured during the 18-month period. The performance measurement, however, can be looked in several aspects. Because of the nature of these recycling plants, at least three aspects, namely government (representing general public), appliance manufacturers and owners of the recycling plants themselves should be considered in the performance evaluation. This study proposes various performance indices categorized in four groups: profitability, recyclability, automation and environment. The indices are different from the productivity and cost measures that are used in conventional manufacturing plants. Performances of three existing plants in Taiwan are evaluated as illustrative examples to demonstrate the use of the proposed measures. The practical implications of the performance indices are also discussed.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.2278-2282
• /
• 2010

The regulation involved with railway vehicles is defined by law to protect customer and fundamental safety. The persisting period of domestic railway vehicles in general are 25~30years. Expired railway vehicles are disused in various way. The railway vehicles are consists of recyclable various materials, but there is no standardization or calculating method related with railway vehicles to make disuse scenario. In this study, performed to get a recycling ratio about major materials of domestic subway railway vehicles using ISO 22628 which is Road vehicles-Recyclability and recoverrability method. This research provide foundation for further researches, standardization of EoL stage and recycling railway vehicle.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 춘계 학술논문 발표대회
• /
• pp.235-242
• /
• 2012

In recently constructed building, It has become fashionable again that the heavy external skin system such as a Stone Finished Envelope. There are Squared Steel Pipe Methods, C-Shaped Steel Pipe Methods, and Aluminum Beam Methods in the structure of a heavy external skin system. The Aluminum Beam Methods is often misunderstood as a Plane Truss Structure, but this method is not appropriate to be called to a truss structure but a beam methods. The Aluminum Beam Methods is the most Eco-friendly methods in terms of Quality assurance, Efficiency, Safety, Construction period, Durability, and Recyclability. And this Methods is also very appropriate in considering the point of Energy conservation, Waste reduction, Long-life architecture, Replacement parts, Environmental protection, Public efficiency, and Building demolition.