• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2017년도 추계학술대회
• /
• pp.421-424
• /
• 2017

본 논문에서는 진동 감지기가 있는 전파 정류 하베스팅 회로를 설계하였다. 설계된 회로는 진동 감지기와 능동다이오드를 통해 진동이 감지될 때에만 동작하며, 진동이 없을 때 비교기를 off시켜 $C_{STO}$에 저장된 에너지의 누설을 방지한다. 커패시터에 저장된 에너지는 레벨 변환기와 능동다이오드의 구동에 사용된다. 진동 감지기는 Hysteresis 기능이 있는 Schmitt Trigger와 피크검출기로 구현하였다. 제안된 회로는 $0.35{\mu}m$ CMOS 공정으로 설계하였으며, 모의실험을 통해 동작을 검증하였다. 설계된 에너지 하베스팅 회로의 칩 면적은 $590{\mu}m{\times}583{\mu}m$이다.

• 전력전자학회논문지
• /
• 제4권3호
• /
• pp.304-309
• /
• 1999

본 논문에서는 새로운 24펄스 다이오드 정류기 시스템을 제안한다. 제안하는 다이오드 정류기 시스템은 기존의 직렬형 12펄스 다이오드 정류기에 수동의 보조회로를 추가함으로서 구성되어지고, 입력전류는 제 22차까지의 고조파가 제거되어 거의 정현파에 가까운 전류 파형을 얻는다. 또한, 출력 전압은 n=24k, k=1,2,3... 의 고조파 성분을 갖는 24펄스 특성를 나타낸다. 더욱이, 이 보조회로의 용량은 출력용량에 비하여 매우 작으며, 능동 스위칭소자를 사용하지 않으므로 외란에 강하고 구현이 간단하다. 따라서, 본 방식은 중·대용량급의 고전압 비제어(uncontrolled) 직류전원이 필요한 인버터나 무정전 전원장치등의 앞단에서 입력고조파의 저감에 경제적이고 효율적이다. 220V, 3KVA 정류기 시스템의 실험을 통하여 제안한 시스템의 타당성을 검증하였다.

• Journal of Power Electronics
• /
• 제15권2호
• /
• pp.366-377
• /
• 2015

In order to minimize switching losses for high power applications, a boost PFC rectifier with a novel passive lossless snubber circuit is proposed. The proposed lossless snubber is composed of coupled inductors merged into a boost inductor. This method compared with conventional methods does not need additional inductor cores and it reduces extra costs to implement a soft switching circuit. Especially, the proposed circuit can reduce the reverse recovery current of output diode rectifiers due to the coupling effect of the inductor. During turn-on and turn-off operating modes, the proposed PFC converter operates under soft switching conditions with high power conversion efficiency. In addition, the performance improvement and analysis of the operating effects of the coupled inductors were also presented and verified with a 3.3 kW prototype rectifier.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1997년도 전력전자학술대회 논문집
• /
• pp.49-54
• /
• 1997

One of the drawbacks of using diode-bridge rectifiers in the unity interface, is the line-current harmonic distortion caused by the nonlinear nature of the rectifier operation. So, a PWM converter for the power factor correction is analysed for unity power factor as well as low cost design, which enable to meet the limits of international standards.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1997년도 전력전자학술대회 논문집
• /
• pp.410-412
• /
• 1997

A new method to improve the THD of the three phase rectifiers is introduced in this paper. The main features of this paper are low cost, high efficiency and simplicity. The proposed 3 bidirectional switches and their operation are presented. A simulation and experiment results show its good action.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1997년도 전력전자학술대회 논문집
• /
• pp.400-409
• /
• 1997

Design of single stage AC/DC converter with high power factor and high efficiency based on half-bridge topology for low power application is proposed. To obtain design equations, modelling and detailed analysis are performed. The proposed converter gives and power factor and high efficiency by employing aynchronous rectifiers. To verify the performances of the proposed converter 90W-converter has been designed. This prototype converter meets IEC555-2 requirements with near unity power factor.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.456-458
• /
• 1991

Beacause cycloconverter requires AC power converter each phase, it has the disadvantage of complexity in main system. In this paper, the simple circulating current typed cycloconverter obtained the three variable voltage and variable frequency by delta-connceting the three natual commuatation phase controled rectifiers is constructed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.553-555
• /
• 1994

Various nonlinear loads such as diode rectifiers, and phase controlled converters connected to at source cause harmonic pollutions in ac mains. Recently some filters have been proposed to minimize the potential problems. This study describes a method to improve the performances of a voltage source active filter. Two feedback loops are used in the scheme : one for reactive power compensation and the other for harmonic eliminations.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1660_1661
• /
• 2009

The excitation system for nuclear emergency diesel generator has been developed and is commercially operating now. The characteristics are triple modular redundant controllers, double redundant rectifiers and digital system, comparing the existing(and removed) system.

• Journal of Power Electronics
• /
• 제3권2호
• /
• pp.69-80
• /
• 2003

Computer aided engineering (CAE) is a systematic approach to develop a better product/application with maximum possible options and minimum transition time. This paper presents a comprehensive feasibility analysis of various CAE techniques for evaluation and optimization of power electronic converters and systems. Different CAE methods for analysis, design, and performance improvement are classified. In addition, their advantages compared to the conventional workbench experimental methods are explained in detail and through examples.